PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 614412

[Hydredynamic bench for pulsatile flows. Application to hemodynamic studies (author's transl)].

M Siouffi·J Doffin·P Issartier
View original source ↗Export metadata ↓

Abstract

Oscillatory or pulsatile flows are produced on a hydrodynamic bench by a volumetric gear pump. The moto-pump group is an original device which is very different from other systems. It is driven by a wave synthesizing generator which enables any flow rate to be produced especially oscillatory, pulsatile or physiological flow. The synthesizing generator delivers a periodic wave with variable amplitude, shape and frequency. The moto-pump group is controlled by an amplifying comparator; it produces a flow whose rate follows the control signal. A study of the modifications of flow patterns induced by models of vascular stenoses has been performed with this bench. The study of the velocity distribution has been effected with a pulsed Doppler ultrasonic velocimeter.

Explore related subjects

Biomedical EngineeringPhysiologyRheologyEnglish AbstractJournal Article

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

M Siouffi, J Doffin, P Issartier. 1977. [Hydredynamic bench for pulsatile flows. Application to hemodynamic studies (author's transl)].. https://pubmed.ncbi.nlm.nih.gov/614412/

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Optimal design of non-Newtonian, micro-scale viscous pumps for biomedical devices.

The present paper addresses the numerical optimization of geometrical parameters of non-Newtonian micro-scale viscous pumps for biomedical devices. The objective is to maximize the mass flow rate per unit of shaft power consumed by the rotor when an external pressure load is applied along the channel that houses the rotor. Two geometric parameters are considered in the optimization process: (i) the height of the channel that houses the rotor (H) and (ii), the eccentricity (epsilon) of the rotor. Three different micro-scale viscous pump configurations were tested: a straight-housed pump (I-shaped housing) and two curved housed pumps (L- and U-shaped housings). The stress-strain constitutive law is modeled by a power-law relation. The results show that the geometric optimization of micro-scale viscous pumps is critical since the mass flow rate propelled by the rotor is highly dependent on epsilon and H. Numerical simulations indicate that mass flow rate is maximized when epsilon approximately 0, namely when the rotor is placed at a distance of 0.05 radii from the lower wall. The results also show that micro-scale viscous pumps with curved housing provide higher mass flow rate per unit of shaft power consumed when compared with straight-housed pumps. The results are presented in terms optimized dimensions of all three configurations (i.e., H(opt) and epsilon(opt)) and for values of the power-law index varying between 0.5 (shear thinning fluids) and 1.5 (shear-thickening fluids).

Biomedical Engineering↗