PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 6236334

A communication aid for the physically handicapped.

P Jardine·S Jerman·N Seddon·J A Rees
View original source ↗Export metadata ↓

Abstract

A communications aid for the severely handicapped is described. The aid is primarily intended to be mounted on an electric wheelchair and to be powered from the chair's battery. It may be operated by any two-switch input system or by more elaborate controls such as joy-sticks. The central unit of the aid is a purpose-built 8085 microcomputer, the operating program and data tables being sorted in a 2 kbyte EPROM. The input control is used to drive a cursor around an 8 X 8 letter board array, the selected alphanumeric character being output to a liquid crystal display. Up to 64 messages, each of no more than 15 characters, can be composed and stored by the user and recalled as required. The messages are stored in a 2 kbyte CMOS memory and are retained when the aid is switched off. It is a simple matter to increase the number of stored messages. The aid was designed with the needs of a particular 15 year old, athetoid child in mind and the results of his tests of the aid will be briefly discussed.

Explore related subjects

Biomedical EngineeringCommunication Devices for People with DisabilitiesComputersHumansSelf-Help DevicesJournal ArticleResearch Support, Non-U.S. Gov't

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

P Jardine, S Jerman, N Seddon, J A Rees. 1984. A communication aid for the physically handicapped.. https://doi.org/10.1016/0141-5425(84)90109-2

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Optimal design of non-Newtonian, micro-scale viscous pumps for biomedical devices.

The present paper addresses the numerical optimization of geometrical parameters of non-Newtonian micro-scale viscous pumps for biomedical devices. The objective is to maximize the mass flow rate per unit of shaft power consumed by the rotor when an external pressure load is applied along the channel that houses the rotor. Two geometric parameters are considered in the optimization process: (i) the height of the channel that houses the rotor (H) and (ii), the eccentricity (epsilon) of the rotor. Three different micro-scale viscous pump configurations were tested: a straight-housed pump (I-shaped housing) and two curved housed pumps (L- and U-shaped housings). The stress-strain constitutive law is modeled by a power-law relation. The results show that the geometric optimization of micro-scale viscous pumps is critical since the mass flow rate propelled by the rotor is highly dependent on epsilon and H. Numerical simulations indicate that mass flow rate is maximized when epsilon approximately 0, namely when the rotor is placed at a distance of 0.05 radii from the lower wall. The results also show that micro-scale viscous pumps with curved housing provide higher mass flow rate per unit of shaft power consumed when compared with straight-housed pumps. The results are presented in terms optimized dimensions of all three configurations (i.e., H(opt) and epsilon(opt)) and for values of the power-law index varying between 0.5 (shear thinning fluids) and 1.5 (shear-thickening fluids).

Biomedical Engineering↗