PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 6533314

Equipment management in practice.

J A Garrett
View original source ↗Export metadata ↓

Abstract

This article describes the setting up, funding and organization of an in-house equipment management service in the Bristol & Weston Health Authority. Existing resources were redeployed to form the present service. The range of equipment now maintained under the auspices of the Medical Physics Bioengineering Group has a capital value of 12 million pounds. All work is costed and a charge made to the client for whom work is carried out. A team of 27 medical physics technicians and three graduate engineers are maintained from this source of income. This method of funding is now making way for a system of job costing which will provide a basis for comparison with an outside service.

Explore related subjects

Biomedical EngineeringEquipment and Supplies, HospitalMaintenance and Engineering, HospitalState MedicineUnited KingdomJournal Article

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

J A Garrett. Equipment management in practice.. https://doi.org/10.3109/03091908409032089

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Optimal design of non-Newtonian, micro-scale viscous pumps for biomedical devices.

The present paper addresses the numerical optimization of geometrical parameters of non-Newtonian micro-scale viscous pumps for biomedical devices. The objective is to maximize the mass flow rate per unit of shaft power consumed by the rotor when an external pressure load is applied along the channel that houses the rotor. Two geometric parameters are considered in the optimization process: (i) the height of the channel that houses the rotor (H) and (ii), the eccentricity (epsilon) of the rotor. Three different micro-scale viscous pump configurations were tested: a straight-housed pump (I-shaped housing) and two curved housed pumps (L- and U-shaped housings). The stress-strain constitutive law is modeled by a power-law relation. The results show that the geometric optimization of micro-scale viscous pumps is critical since the mass flow rate propelled by the rotor is highly dependent on epsilon and H. Numerical simulations indicate that mass flow rate is maximized when epsilon approximately 0, namely when the rotor is placed at a distance of 0.05 radii from the lower wall. The results also show that micro-scale viscous pumps with curved housing provide higher mass flow rate per unit of shaft power consumed when compared with straight-housed pumps. The results are presented in terms optimized dimensions of all three configurations (i.e., H(opt) and epsilon(opt)) and for values of the power-law index varying between 0.5 (shear thinning fluids) and 1.5 (shear-thickening fluids).

Biomedical Engineering↗