PubMed HealthSearch

PubMed · 6562280

Hemodialysis leukopenia and complement function with different dialyzers.

Abstract

The relationship between leukopenia and the complement system during hemodialysis was re-examined by studying not only the in vivo effects of four different dialyzer membranes (cellulose hydrate, cuprophan, cellulose acetate, and polyacrilonitrile) on leukocyte counts and complement levels, but especially by investigating the effects of these membranes on complement function in vitro. Whereas from in vivo studies no definite conclusions could be drawn, in vitro investigations provided clear-cut information. When more sophisticated technical approaches were undertaken, it became evident that hemodialysis leukopenia has to be thought of in terms of chemotactic factor generation. In fact, a strict correlation was demonstrated between the degree of leukopenia induced by the dialyzers tested and the ability of the relative membrane to generate chemotactic activity in vitro. Moreover, the previously observed ability of polyacrilonitrile membrane to induce a decrement in complement function was due to the ability of polyacrilonitrile to adsorb complement activity and did not correspond to effective complement consumption. This finding explained why polyacrilonitrile dialysis is not accompanied by a decrease in circulating granulocytes. Taken together, our data strongly point to a pivotal role of complement system in the pathogenesis of hemodialysis leukopenia.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

A Amadori, P Candi, M Sasdelli, G Massai, S Favilla, A Passaleva, M Ricci. 1983. Hemodialysis leukopenia and complement function with different dialyzers.. https://doi.org/10.1038/ki.1983.227

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Control of protein-ligand recognition using a stimuli-responsive polymer.

Stimuli-responsive polymers exhibit reversible phase changes in response to changes in environmental factors such as pH or temperature. Conjugating such polymers to antibodies and proteins provides molecular systems for applications such as affinity separations, immunoassays and enzyme recovery and recycling. Here we show that conjugating a temperature-sensitive polymer to a genetically engineered site on a protein allows the protein's ligand binding affinity to be controlled. We synthesized a mutant of the protein streptavidin to enable site-specific conjugation of the responsive polymer near the protein's binding site. Normal binding of biotin to the modified protein occurs below 32 degrees C, whereas above this temperature the polymer collapses and blocks binding. The collapse of the polymer and thus the enabling and disabling of binding, is reversible. Such environmentally triggered control of binding may find many applications in biotechnology and biomedicine, such as the control of enzyme reaction rates and of biosensor activity, and the controlled release of drugs.

Acrylic Resins

Cyclosporin analogs modified in the 3,7,8-positions: substituent effects on peptidylprolyl isomerase inhibition and immunosuppressive activity are nonadditive.

Four analogs of cyclosporin A (CsA) were synthesized to determine if the biological activities of CsA analogs generated by multiple amino acid replacements are predictable from the effects on biological activity of analogs with single residue changes. CsA analogs [Phe7]CsA (8a), [D-MeAla3,Phe7]CsA (8b), [D-Ser8,Phe7]CsA (8c), and [D-MeAla3,Phe7,D-Ser8]CsA (8d) were designed by modification of positions 3, 7, and 8, which are adjacent to one effector region of the cyclophilin-bound CsA complex. The syntheses of CsA analogs 8a-d were carried out by suitable modifications of the reported strategy. Each analog was characterized by NMR in deuterated chloroform and DMSO solutions, and their biological activities as inhibitors of cis-trans-peptidyl prolyl isomerase (PPIase), inhibitors of proliferation in BDF1 mouse spleen cells stimulated with concanavalin A (Con A), and inhibitors of IL-2 release stimulated with PMA/ionomycin by Jurkat cells were determined. Incorporation of the phenylalanine residue in position 7 diminished activities 5-8-fold. Substitution at position 3 decreased activity nearly 2-fold, and substitution at position 8 did not lower activities. However, when all three modifications (D-MeAla3,Phe7, and D-Ser8) were incorporated into one molecule, the resulting analog, 8d, was found to bind more tightly to cyclophilin than CsA (Ki = 3 +/- 1.5 vs 6 +/- 2 nM) and to produce the full immunosuppressive effect in the other assay systems. Our structure-activity results show that combinations of substitutions that individually lower PPIase or immunosuppressive activity produce fully active analogs when combined in a single compound. These results suggest that other, multimodified CsA derivatives may be discovered that possess excellent or improved immunosuppressive activities even though they contain a substitution that otherwise reduces immunosuppressive activity.

Acrylic Resins

Capillary electrophoresis of rat liver microsomes in polymer solutions.

Rat liver microsome components were separated by capillary zone electrophoresis in buffers containing substituted agarose, agarose crosslinked polyacrylamide, polyacrylamide, polyethylene glycol and dextran of various molecular weights. The best resolution of the components was obtained with polymers of 10-21 nm geometric mean radius. Both the crude and the purified preparations of microsomes exhibit a single major peak. In a Tris-borate-EDTA (TBE) buffer, containing polyacrylamide of 5 x 10(6) molecular weight, it has a retardation coefficient, KR, of 0.77 +/- 0.02. Translation of the KR value to geometric mean radii, R, on the basis of the standard curve applicable to polymer solutions, KR vs. R, with polystyrene carboxylate size standards in both dextran and polyacrylamide solution allows one to estimate a value of R as 13-16 nm for the major microsome component. The value is smaller than expected from electron microscopic measurements (100-250 nm), possibly due to the chemical and geometric differences between microsomes and the polystyrene particles used as size standards. The crude preparation also contains a minor component which is smaller and less charged than the major component. Another component, apparently very much larger than the major one, is seen in TBE buffer but not in a potassium-N-(2-hydroxyethyl)piperazine-2'-(2-ethanesulfonic acid) buffer and is therefore thought to be an artifact of interaction with borate. After a short incubation under conditions promoting delayed microsome fusion, i.e. in presence of GTP and Mg++ and in the absence of polyethylene glycol, the electrophoretic pattern changes dramatically: it now exhibits five unretarded, highly mobile and, therefore, presumably large components in addition to the two original retarded components of the microsome and a less highly charged species similar in KR to the smaller of the original two components.

Acrylic Resins