PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 6708491

A general-purpose microprocessor system for medical instrumentation and electrical stimulation.

H G Goovaerts·C van Veen·M A Meekes
View original source ↗Export metadata ↓

Abstract

The article describes the design of a user-defined multipurpose system based on the Zilog Z-80, 8-bit microprocessor. The basic concept comprises a mainframe with a keyboard/display interface for communication between user and system. Different types of instrumentation equipment can be obtained using the same mainframe; only the contents of the program memory have to be changed. Up to seven programmable input/output boards can be installed. Some special-purpose boards are constructed to improve the versatility of the system. The major advantage of the presented system is that it can be applied at any time in the laboratory in an experiment or in the hospital for diagnostic or therapeutic purposes, without the engagement of existing computer memory.

Explore related subjects

Biomedical EngineeringComputersElectric StimulationEquipment and SuppliesMicrocomputersModels, TheoreticalJournal Article

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

H G Goovaerts, C van Veen, M A Meekes. 1984. A general-purpose microprocessor system for medical instrumentation and electrical stimulation.. https://doi.org/10.1016/0141-5425(84)90049-9

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Optimal design of non-Newtonian, micro-scale viscous pumps for biomedical devices.

The present paper addresses the numerical optimization of geometrical parameters of non-Newtonian micro-scale viscous pumps for biomedical devices. The objective is to maximize the mass flow rate per unit of shaft power consumed by the rotor when an external pressure load is applied along the channel that houses the rotor. Two geometric parameters are considered in the optimization process: (i) the height of the channel that houses the rotor (H) and (ii), the eccentricity (epsilon) of the rotor. Three different micro-scale viscous pump configurations were tested: a straight-housed pump (I-shaped housing) and two curved housed pumps (L- and U-shaped housings). The stress-strain constitutive law is modeled by a power-law relation. The results show that the geometric optimization of micro-scale viscous pumps is critical since the mass flow rate propelled by the rotor is highly dependent on epsilon and H. Numerical simulations indicate that mass flow rate is maximized when epsilon approximately 0, namely when the rotor is placed at a distance of 0.05 radii from the lower wall. The results also show that micro-scale viscous pumps with curved housing provide higher mass flow rate per unit of shaft power consumed when compared with straight-housed pumps. The results are presented in terms optimized dimensions of all three configurations (i.e., H(opt) and epsilon(opt)) and for values of the power-law index varying between 0.5 (shear thinning fluids) and 1.5 (shear-thickening fluids).

Biomedical Engineering↗