PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 7159699

Biotelemetry, based on optical transmission.

H P Kimmich
View original source ↗Export metadata ↓

Abstract

Biotelemetry has developed as a reliable alternative to continuous monitoring of physiological variables under realistic circumstances of data assessment. For incorporation in clinical routine the lack of an adequate number of biotelemetry frequencies forms a severe disadvantage. This paper shows a way to circumvent the problem, namely by using infrared light as the carrier for the transmission system. Use of infrared light is limited to indoor applications, and a number of additional restrictions have to be accepted, but on the other hand infrared telemetry opens new possibilities not known to radiotelemetry, especially suited for clinical applications.

Explore related subjects

Biomedical EngineeringComputersCritical CareHumansInfrared RaysLightMonitoring, PhysiologicTelemetryJournal Article

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

H P Kimmich. 1982. Biotelemetry, based on optical transmission.. https://pubmed.ncbi.nlm.nih.gov/7159699/

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Optimal design of non-Newtonian, micro-scale viscous pumps for biomedical devices.

The present paper addresses the numerical optimization of geometrical parameters of non-Newtonian micro-scale viscous pumps for biomedical devices. The objective is to maximize the mass flow rate per unit of shaft power consumed by the rotor when an external pressure load is applied along the channel that houses the rotor. Two geometric parameters are considered in the optimization process: (i) the height of the channel that houses the rotor (H) and (ii), the eccentricity (epsilon) of the rotor. Three different micro-scale viscous pump configurations were tested: a straight-housed pump (I-shaped housing) and two curved housed pumps (L- and U-shaped housings). The stress-strain constitutive law is modeled by a power-law relation. The results show that the geometric optimization of micro-scale viscous pumps is critical since the mass flow rate propelled by the rotor is highly dependent on epsilon and H. Numerical simulations indicate that mass flow rate is maximized when epsilon approximately 0, namely when the rotor is placed at a distance of 0.05 radii from the lower wall. The results also show that micro-scale viscous pumps with curved housing provide higher mass flow rate per unit of shaft power consumed when compared with straight-housed pumps. The results are presented in terms optimized dimensions of all three configurations (i.e., H(opt) and epsilon(opt)) and for values of the power-law index varying between 0.5 (shear thinning fluids) and 1.5 (shear-thickening fluids).

Biomedical Engineering↗