PubMed · 7266108
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
P J Strömer, J O Lekkala, J A Malmivuo. 1981. Accurate digital synthesizer for simulating vectorcardiogram.. https://doi.org/10.1007/bf02442724
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
BACKGROUND: The educational role of surgical video presentations should be optimized by linking surgical images to graphic evaluation of indications, techniques, and results. We describe a PC-based video production system for personal editing of surgical tapes, according to the objectives of each presentation. METHODS: The hardware requirement is a personal computer (100 MHz processor, 1-Gb hard disk, 16 Mb RAM) with a PC-to-TV/video transfer card plugged into a slot. Computer-generated numerical data, texts, and graphics are transformed into analog signals displayed on TV/video. A Genlock interface (a special interface card) synchronizes digital and analog signals, to overlay surgical images to electronic illustrations. The presentation is stored as digital information or recorded on a tape. RESULTS: The proliferation of multimedia tools is leading us to adapt presentations to the objectives of lectures and to integrate conceptual analyses with dynamic image-based information. We describe a system that handles both digital and analog signals, production being recorded on a tape. Movies may be managed in a digital environment, with either an "on-line" or "off-line" approach. System requirements are high, but handling a single device optimizes editing without incurring such complexity that management becomes impractical to surgeons. CONCLUSIONS: Our experience suggests that computerized editing allows linking surgical scientific and didactic messages on a single communication medium, either a videotape or a CD-ROM.
To automate analysis of left ventricular pressure-volume data, we used LabVIEW to create applications that digitize and display data recorded from conductance and manometric catheters. Applications separate data into cardiac cycles, calculate parallel conductance, and calculate indices of left ventricular function, including end-systolic elastance, preload-recruitable stroke work, stroke volume, ejection fraction, stroke work, maximum and minimum derivative of ventricular pressure, heart rate, indices of relaxation, peak filling rate, and ventricular chamber stiffness. Pressure-volume loops can be graphically displayed. These analyses are exported to a text-file. These applications have simplified and automated the process of evaluating ventricular function.
Instrumentation was developed to apply controlled biaxial (normal and shear) forces to the skin of a human or animal subject. The instrument mimicked any reference waveform within the constraints of a bandwidth of 15 Hz, a maximum force of 20 N, and displacement ranges of 15 mm for the normal direction and 18 mm for the shear direction. Two shaker motors, positioned with their axes parallel, were used with a low effective mass linkage and small-angle rotational joints to deliver the force. A digital feedback controller independently controlled the instantaneous normal and shear forces and recorded the resultant displacements. Evaluations on human and animal (pig) subjects demonstrated mean absolute errors between the applied and reference waveforms of less than 1.2% full-scale output for both the normal and shear directions. No degradation in performance was apparent over the course of a 1-h loading session. The instrument is to be used for the investigation of skin adaptation to mechanical stress, information that could be used to design new therapeutic methods to encourage skin load-tolerance.