PubMed Health⌕ Search

PubMed · 8205366

Manual or automatic nulling DC offset for physiological DC amplifier.

Abstract

An inexpensive circuit to compensate for DC offset is presented. The circuit may be connected in a straightforward manner to any currently existing DC isolation amplifier and causes no deterioration in the performance of the system. The offset voltage is measured at discrete time intervals and then subtracted from the input signal. A switch is provided to bypass the offset compensation when the latter is not required.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

M Verbeke, S Gur, S Ron, R Iraqi. 1994. Manual or automatic nulling DC offset for physiological DC amplifier.. https://doi.org/10.1016/1350-4533(94)90030-2. https://pubmed.health/record/pubmed%3A8205366/manual-or-automatic-nulling-dc-offset-for-physiological-dc-amplifier

Citations retain the original authors and DOI and include this site’s record URL. If this discovery service contributed to your research, you can also cite PubMed Health by Indiciae: BibTeX · RIS.

KEEP EXPLORING

Related citations

Optimal design of non-Newtonian, micro-scale viscous pumps for biomedical devices.

The present paper addresses the numerical optimization of geometrical parameters of non-Newtonian micro-scale viscous pumps for biomedical devices. The objective is to maximize the mass flow rate per unit of shaft power consumed by the rotor when an external pressure load is applied along the channel that houses the rotor. Two geometric parameters are considered in the optimization process: (i) the height of the channel that houses the rotor (H) and (ii), the eccentricity (epsilon) of the rotor. Three different micro-scale viscous pump configurations were tested: a straight-housed pump (I-shaped housing) and two curved housed pumps (L- and U-shaped housings). The stress-strain constitutive law is modeled by a power-law relation. The results show that the geometric optimization of micro-scale viscous pumps is critical since the mass flow rate propelled by the rotor is highly dependent on epsilon and H. Numerical simulations indicate that mass flow rate is maximized when epsilon approximately 0, namely when the rotor is placed at a distance of 0.05 radii from the lower wall. The results also show that micro-scale viscous pumps with curved housing provide higher mass flow rate per unit of shaft power consumed when compared with straight-housed pumps. The results are presented in terms optimized dimensions of all three configurations (i.e., H(opt) and epsilon(opt)) and for values of the power-law index varying between 0.5 (shear thinning fluids) and 1.5 (shear-thickening fluids).

Biomedical Engineering↗