PubMed HealthSearch

PubMed · 8229386

Distal locking screw insertion using a cannulated drill bit: technical note.

Abstract

The source did not provide an abstract. Follow the original record for more information.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

E C Yang. 1993. Distal locking screw insertion using a cannulated drill bit: technical note.. https://pubmed.ncbi.nlm.nih.gov/8229386/

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Early versus delayed reduction and pinning of type III displaced supracondylar fractures of the humerus in children: a comparative study.

OBJECTIVES: To determine whether children with Type III displaced supracondylar fractures of the humerus that were pinned in a delayed fashion, defined as more than eight hours after fracture, had a greater need for open reduction than patients with similar fractures pinned more urgently, within eight hours after the trauma. Also, to determine whether those patients treated later fared any worse than patients treated earlier. DESIGN: Retrospective review of consecutive patients. SETTING: Level I pediatric trauma center at a tertiary children's hospital. PATIENTS: Fifty-eight consecutive patients, twenty-three with early pinning and thirty-five with delayed pinning. A subgroup of sixteen patients was followed for detailed clinical outcome. INTERVENTION: Closed or open reduction and percutaneous pinning MAIN OUTCOME MEASUREMENTS: Need for open reduction in either group. A separate subgroup was examined for carrying angle and evidence of low-grade compartment syndrome (such as grip strength and range of motion). RESULTS: There was no difference in the need for open reduction in the group that was delayed and pinned more than eight hours following fracture. Follow-up examination showed no clinical difference between the two groups in any parameter measured. CONCLUSIONS: These results indicate that many supracondylar fractures of the humerus can be treated safely in a delayed manner with an excellent clinical result and without unduly prolonging the hospital stay (such as with traction). This allows the patient to be NPO and the surgeon to operate in daylight hours, saving time, hospital resources, and fatigue.

Bone Nails

Endoscopically assisted decompression for metastatic thoracic neoplasms.

STUDY DESIGN: The author describes a technique for complete vertebrectomy and anterior decompression followed by a formal anterior column reconstruction, using readily available endoscopic instruments. This procedure is indicated in patients with radioresistant metastasis of the thoracic spine, particularly those involving the upper thoracic segments where a thoracotomy is difficult and causes a high rate of morbidity. This is also a suitable technique for patients with pulmonary disease who cannot tolerate a standard thoracotomy. OBJECTIVES: To demonstrate the feasibility and potential benefits of endoscopically controlled decompression through an extrapleural, posterolateral approach. SUMMARY OF BACKGROUND DATA: Posterolateral decompression of the thoracic spine offers potential advantages in comparison with traditional anterior-posterior procedures combining thoracotomy and posterior instrumentation, including decreased operative time, decreased morbidity, and reduced hospital stay. Results of previous studies have not demonstrated the same benefit for posterolateral decompression as for anterior vertebrectomy and decompression. Drawbacks to the traditional posterolateral decompressions have included poor visualization of the spinal cord and anterior tumor, poor access to tumor on the side contralateral to the approach, and the need to manipulate the spinal cord to completely remove adjacent tumor and tumor adherent to the dura. METHODS: Surgical indications, rationale, and technique are provided, and initial clinical results are described. RESULTS: Transpedicular decompression using endoscopy is described in five patients. The mean operative time for the combined procedure was 7.25 hours, with a mean blood loss of 1800 mL. Neurologic recovery and maintenance were excellent. Inpatient days averaged 7.5, and intensive care days averaged 2. One patient died of disease 8 months after surgery, and four were living, with disease, 3-24 months after surgery. CONCLUSIONS: Endoscopically assisted decompression can reduce morbidity, hospital stay, and treatment costs while matching the efficacy of traditional combined procedures. Endoscopy provides a readily available and easily applied tool that dramatically improves the surgeon's vision, providing light, magnification, and a direct view of remote structures.

Bone Nails

Deformation of femoral nails with intramedullary insertion.

Current methods of distal interlocking of intramedullary femoral nails are dependent on image intensification. However, radiation exposure to the patient, the operating room staff, and the surgeon remains a concern. Proximally mounted, radiation-free aiming systems for distal interlocking of femoral nails have reportedly failed because of nail deformation with insertion. To better understand this deformation, a three-dimensional magnetic motion tracking system was used to determine the position of the distal interlocking hole following nail insertion. The amount and direction of deformation of commercially available small-diameter implants (unslotted 9-mm nails inserted without reaming) and large-diameter implants (slotted 13-mm nails inserted with reaming) from a single manufacturer were analyzed. Measurements of deformation (three translations and three angles), based on the center of the distal transverse locking hole, were performed on 10 paired intact human cadaveric femora before and after insertion. The technique produced the following results for the small and large-diameter nails, respectively: lateral translations of 18.1+/-10.0 mm (mean+/-SD, range: 47.8 mm) and 21.5+/-7.9 mm (range: 26.4 mm), dorsal translations of -3.1+/-4.3 mm (range: 15.2 mm) and 0.4+/-9.8 mm (range: 30.1 mm), and rotation about the longitudinal axes of -0.1+/-0.2 degrees (range: 0.7 degrees) and 10.0+/-3.1 degrees (range: 7.8 degrees). This technique is useful for measuring insertion-related femoral nail deformation. The data for the nails tested suggest that a simple aiming arm, mounted on the proximal end of the femoral nail alone, will not sufficiently provide accurate distal aiming.

Bone Nails