PubMed Health⌕ Search

PubMed · 8346204

Composite, large spirochetes from microbial mats: spirochete structure review.

Abstract

Phenomena previously unknown in free-living spirochetes are reported: large-sized cells with variable diameter (length to 100 microns, width between 0.4 and 3.0 microns), composite structure (smaller spirochetes inside larger ones), and positive phototropic behavior. These bacteria, Spirosymplokos, are compared with all other spirochete genera. The large spirochete, grown in mixed culture, was studied live and by transmission EM. The protoplasmic cylinder was replete with spherical granules 20-32 nm in diameter, and three to six periplasmic 26-nm flagella were inserted subterminally. Comparably granulated and flagellated small spirochetes were located inside the protoplasmic cylinder and in the periplasm of the large ones. When exposed to air, movement became erratic, protoplasmic cylinders retracted to lie folded inside the outer membrane, and refractile membranous structures formed. From one to four structures per still-moving spirochete were seen. Spirosymplokos was enriched from laboratory samples exposed to oxygen-rich and desiccating, but not dry, conditions for at least 4 mo after removal of microbial mat from the field.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

L Margulis, J B Ashen, M Solé, R Guerrero. 1993-08-01. Composite, large spirochetes from microbial mats: spirochete structure review.. https://doi.org/10.1073/pnas.90.15.6966

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Synthesis of soluble phosphate polymers by RAFT and their in vitro mineralization.

Soluble linear (non-cross-linked) poly(monoacryloxyethyl phosphate) (PMAEP) and poly(2-(methacryloyloxy)ethyl phosphate) (PMOEP) were successfully synthesized through reversible addition-fragmentation chain transfer (RAFT)-mediated polymerization and by keeping the molecular weight below 20 K. Above this molecular weight, insoluble (cross-linked) polymers were observed, postulated to be due to residual diene (cross-linkable) monomers formed during purification of the monomers, MOEP and MAEP. Block copolymers consisting of PMAEP or PMOEP and poly(2-(acetoacetoxy)ethyl methacrylate) (PAAEMA) were successfully prepared and were immobilized on aminated slides. Simulated body fluid studies revealed that calcium phosphate (CaP) minerals formed on both the soluble polymers and the cross-linked gels were very similar. Both the PMAEP polymers and the PMOEP gel showed a CaP layer most probably brushite or monetite based on the Ca/P ratios. A secondary CaP mineral growth with a typical hydroxyapatite (HAP) globular morphology was found on the PMOEP gel. The soluble PMOEP film formed carbonated HAP according to Fourier transform infrared (FTIR) spectroscopy. Block copolymers attached to aminated slides showed only patchy mineralization, possibly due to the ionic interaction of negatively charged phosphate groups and protonated amines.

Microscopy, Electron↗

Porous structure of natural and modified clinoptilolites.

The evaluation of the pore-size distribution (PSD) of natural and modified mesoporous zeolites, i.e., clinoptilolites is presented. We demonstrate the SEM results showing that the pores of fracture-type from 25-50 nm to 100 nm in size between clinoptilolite grains, as well as pores between crystal aggregates up to 500 nm in size are present in the studied material. The detailed distribution of pore sizes and tortuosity factor of the above-mentioned materials are determined from the adsorption-desorption isotherms of nitrogen measured volumetrically at 77 K. To obtain the reliable pore size distribution (PSD) of the above-mentioned materials both adsorption and desorption branches of the experimental hysteresis loop are described simultaneously by recently developed corrugated pore structure model (CPSM) of Androutsopoulos and Salmas. Evaluated pore size distributions are characterized by well-defined smooth peaks placed in the region of the mesoporosity. Moreover, the mean pore diameter calculated from the classical static measurement of nitrogen adsorption at 77 K correspond very well to the pore diameters from SEM, showing the applicability of the CPSM for characterization of the porosity of natural zeolites. We conclude that classical static adsorption measurements combined with the proper modeling of the capillary condensation/evaporation phenomena are a powerful method which can be applied for pore structure characterization of natural and modified clinoptilolites.

Microscopy, Electron↗