PubMed HealthSearch

PubMed · 8748495

Visualizing tissue compliance with MR imaging.

Abstract

We propose a method for visualizing the mechanical properties of tissue based on the use of periodic mechanical compression in conjunction with phase-contrast MR imaging. A specialized mechanical transducer was used to provide programmable compression pulses to the surface of compliant phantoms. These compression pulses were synchronized to a spin-echo sequence with motion-sensitizing gradients to generate phase information reflecting spin displacement throughout the phantom. This sequence was tested with two agarose gel phantoms. The first was a cylinder containing three parallel layers of varying compliance and the second was composed of a semirigid sphere suspended in a uniform layer of decreased elastic modulus. Images showed complex patterns of motion throughout the phantom, which correlated with expected motion behavior of the phantom structures. This indicates that the biomechanical properties of tissues may be elucidated through the use of motion-sensitized MR imaging and suggests that a form of image contrast relating to tissue elasticity may be feasible.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

D B Plewes, I Betty, S N Urchuk, I Soutar. Visualizing tissue compliance with MR imaging.. https://doi.org/10.1002/jmri.1880050620

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Effect of prolonged pulsatile shear stress in vitro on endothelial cell seeded PTFE and compliant polyurethane vascular grafts.

OBJECTIVES: Compliance mismatch between graft and native artery, and failure of the graft to develop an endothelial lining are the two main factors in graft failure. The objective of this study was to assess a new compliant graft for effective cell attachment and cell retention at physiological levels of pulsatile shear stress over a 6-hour period of physiological pulsatile flow. DESIGN: Laboratory haemodynamic study. MATERIALS AND METHODS: Human umbilical vein endothelial cells labelled with 111In-oxine were seeded on compliant polyurethane (CPU) and polytetrafluoroethylene (PTFE) vascular grafts. These were then exposed to varying shear stresses of up to 13.8 +/- 0.6 dyn/cm2 using a pulsatile flow model. Dynamic scintigraphy images were acquired using a gamma camera linked to an on-line computer during 6 h of perfusion and data presented as mean +/- standard error of mean. RESULTS: Mean seeding efficiencies were significantly different at 4,316 +/- 505 and 825 +/- 504 CPM/cm2 on the CPU and PTFE grafts, respectively (p = 0.018). The flow experiment showed a higher percentage of cells retained on the CPU graft after exposure to shear stress caused by pulsatile flow compared to PTFE with respect to time. After 6 h pulsatile perfusion there was a significantly higher proportion of initial cells attached to CPU graft compared to PTFE graft (73 +/- 8% vs 42 +/- 8%, p = 0.018). The areas under the time activity curves over the 6-hour period were 280 +/- 26.4 for CPU and 176.0 +/- 30.0 for PTFE, confirming a significant greater total cell loss from PTFE compared with CPU grafts (51 +/- 7.0% vs 23 +/- 8.3%, p = 0.018, Wilcoxon matched-pairs signed-ranks test). CONCLUSIONS: This flow model provides an effective method of assessing cell retention on graft materials under physiological conditions over a 6-hour period; CPU combines both excellent compliance and endothelial cell attachment rates after 6 h exposure to shear stress.

Compliance