PubMed · 8949065
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
L Goldman. 1996. Environmentally speaking.. https://pubmed.ncbi.nlm.nih.gov/8949065/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
The remediation of metal-contaminated sediment was studied using the bioleaching process with a mixed culture of sulfur-oxidizing bacteria. The effects of substrate concentration (elemental sulfur) on sediment acidification, sulfur oxidation and metal solubilization from contaminated sediment during the bioleaching process were investigated with free-cell suspensions. Sulfur concentration greater than 0.5% (w/v) was found to be inhibitory to bacterial activity and metal solubilization from sediment. The sulfate production was well described by a substrate inhibition expression and Haldane's equation. In addition, an empirical equation related to sulfur concentration was also used to describe the metal solubilization in the bioleaching process.
The sonochemical degradation of chlorinated hydrocarbons such as 1,1,1-trichloroethane, trichloroethylene and tetrachloroethylene in aqueous solution was carried out in the batch and continuous flow systems at an ultrasonic frequency of 100kHz under an air atmosphere. In the batch experiment, the rate of degradation follows the order 1,1,1-trichloroethane>tetrachloroethylene>trichloroethylene, and the chlorinated hydrocarbon were readily degraded by ultrasonic irradiation. The experiments in the continuous flow system were performed in the range of volumetric flow rate from 7 to 30 x 10(-3)lmin(-1). The conversion of the chlorinated hydrocarbons at a steady-state of reactor depended on the volumetric flow rate. The yield of Cl(-) (as a measurement of mineralization of chlorinated hydrocarbons) was 70-90% of the chlorine atoms in the parent chlorinated hydrocarbon molecules. From the viewpoint of the scale-up process, the sonochemical degradation of trichloroethylene was simulated in a three stage reactor, and the conversion (>99%) in a third stage reactor was showed the good results that can be satisfied a desired water quality standard.
A simple method for determining lead in fine particulates (PM2.5) by using electrothermal atomic absorption spectrometry (ETAAS) has been developed. Particulates collected on Nuclepore filter by using a dichotomous sampler were suspended in diluted nitric acid after ultrasonic agitation. The dislodging efficiency is nearly 100% after agitation for 5 min. In order to study the suspension behavior of PM2.5 in solvents, a Brookhaven ZetaPlus Particle Size Analyzer was used to determine the particle size distribution and suspension behavior of air particulates in the solvent. The pre-digestion and modification effect of nitric acid would be discussed. Palladium was added as a chemical modifier and the temperature program of ETAAS was changed in order to improve the recovery. The slurry was introduced directly into a graphite tube for atomization. The metal content in the sample was determined by the standard addition method. In addition, a conventional acid digestion procedure was applied to verify the efficiency of the slurry sampling method. It offers a quick and efficient alternative method for heavy metal characterization in fine particulates.