PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 9421791

A procedure for constructing dentures with interchangeable teeth.

M M Khamis·H S Zaki
View original source ↗Export metadata ↓

Abstract

Studies that compare different types of complete denture teeth have repeatedly emphasized the importance of standardizing all denture factors, except the type of teeth. Within-subject comparisons have also been recommended to avoid personal differences between patients. For optimum results, one denture should be constructed for each patient with interchangeable teeth. This article describes a simple and accurate procedure for constructing dentures with interchangeable posterior teeth.

Explore related subjects

Acrylic ResinsBicuspidDental OcclusionDenture BasesDenture DesignDenture, CompleteDenture, Complete, LowerDenture, Complete, UpperHumansJaw Relation RecordMolarPlasticsTooth, ArtificialComparative StudyJournal Article

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

M M Khamis, H S Zaki. 1997. A procedure for constructing dentures with interchangeable teeth.. https://doi.org/10.1016/s0022-3913(97)70013-1

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed1999

Kinetic analysis of deactivation of immobilized alpha-chymotrypsin by water-miscible organic solvent in kyotorphin synthesis.

Two different immobilized chymotrypsin derivatives were used to synthesize kyotorphin, using N-benzoyl-L-tyrosine ethyl ester and L-arginine ethyl ester as substrates, in water-DMF media. The first was adsorbed onto Celite particles and the second was multipoint covalently attached into polyacrylamide gel. In all cases, the conversion of the carboxyl substrate was carried out in first-order reaction conditions. For the adsorbed enzyme, the reaction kinetics deviated from first-order likely due to a fast irreversible inactivation of enzyme during the reaction time even at low DMF concentration (15-20% v/v). The covalent attachment of enzyme resulted in elimination of irreversible activity loss by organic solvent up to 60% (v/v) of DMF. The catalytic activity of the covalent derivative was conserved as appropriate for performing a synthetic reaction up to 60% v/v of DMF (in comparison to 30% v/v for the adsorbed derivative), showing a clear improvement in its stability against reversible denaturation by this solvent. The selectivity of the synthetic reaction was slightly enhanced (from 40-50%) with the increase in DMF concentration to 80% v/v, but it was significantly improved (to 80%) when L-argininamide was used as nucleophile.

Acrylic Resins↗
PubMed1999

Temperature-dependent interaction of thermo-sensitive polymer-modified liposomes with CV1 cells.

Egg yolk phosphatidylcholine liposomes modified with a copolymer of N-acryloylpyrrolidine and N-isopropylacrylamide having a lower critical solution temperature at ca. 40 degrees C were prepared and an effect of temperature on their interaction with CV1 cells was investigated. The unmodified liposomes were taken up by the cells approximately to the same extent after 3 h incubation at 37 and 42 degrees C. In contrast, uptake of the polymer-modified liposomes by CV1 cells decreased slightly at 37 degrees C but increased greatly at 42 degrees C, compared to the unmodified liposomes. Proliferation of the cells was partly prohibited by the incubation with the unmodified liposomes encapsulating methotrexate at 37 and 42 degrees C. The treatment with the polymer-modified liposomes containing methotrexate at 37 degrees C hardly effected the cell growth. However, the treatment at 42 degrees C inhibited the cell growth completely. It is considered that the highly hydrated polymer chains attached to the liposome surface suppressed the liposome-cell interaction below the lower critical solution temperature of the polymer but the dehydrated polymer chains enhanced the interaction above this temperature. Because interaction of the polymer-modified liposomes with cells can be controlled by the ambient temperature, these liposomes may have potential usefulness as efficient site-specific drug delivery systems.

Acrylic Resins↗
PubMed1999

An investigation into interactions between polyacrylic polymers and a non-ionic surfactant: an emulsion preformulation study.

The aim of this study was to investigate possible interactions between a polymeric emulsifier and a non-ionic surfactant, with a view of achieving better understanding of emulsion stabilisation mechanisms. The polymeric emulsifier used was acrylates/C10-30 alkyl acrylate crosspolymer (Pemulen TR-2(R)), while Polyoxyethylene 20 sorbitan mono-oleate (Polysorbate 80) has been chosen as a model surfactant. Both materials were used within the concentration range relevant for their practical application. A 0.2%w/w aqueous dispersion of polymeric emulsifier, containing various amounts of surfactant (from 0.01 to 1.0% w/w) was used throughout the study. Interfacial aspects of the proposed polymer/surfactant interactions were analysed by means of surface tension measurements. Changes in the network structure of the test dispersions were quantified by continuous shear rheometry, supported by the texture analysis. To analyse the influence of hydrophobic alkyl groups present on the Pemulen TR-2(R) chains, an unmodified, hydrophilic polyacrylic acid polymer, Carbopol 934P(R), was assessed under the same conditions. The results obtained by both surface tension and rheological studies have revealed large differences in behaviour of the two polymers in the presence of the model surfactant. Pemulen TR-2(R) was shown to desorb the surfactant from the surface, within the whole concentration range studied. Furthermore, an increase in viscosity and texture profile parameters with increasing Polysorbate 80 concentration up to 0.3% w/w was evident in the case of Pemulen TR-2(R) dispersions. This was followed by a decrease in the gel network strength at higher surfactant concentrations. On the other hand, Carbopol 934P(R) has shown no signs of surfactant desorption and only small changes in the network structure with the increasing concentration of surfactant. It is shown in this study that an interaction between a polymeric emulsifier Pemulen TR-2(R) and a non-ionic surfactant Polysorbate 80 does occur in their aqueous dispersion, and that it is: (a) hydrophobic in nature; (b) concentration-dependent; and (c) has an impact on the rheological properties of dispersion.

Acrylic Resins↗