An endoscopic pedicle probe: preliminary development.

E H Frank; D L Chamberland

doi:10.1080/01616412.1997.11740877

Home/Archive/PubMed

PubMed · 9427970

An endoscopic pedicle probe: preliminary development.

E H Frank·D L Chamberland

View original source ↗Export metadata ↓

Abstract

Insertion of pedicle screws in the thoracolumbar spine can be challenging. Incorrect placement can lead to a failure of fusion or to significant neurologic morbidity. Recently, techniques utilizing intraoperative monitoring and stereotaxis have been developed to achieve proper screw placement. While these techniques may be accurate, they are expensive and may require additional operating room personnel. We have developed an endoscopic pedicle probe for placement of pedicle screws that may overcome some of these limitations. A small 1.2 mm endoscope was adapted to fit within a hollow pedicle probe. Irrigation was provided via a separate channel within the endoscope. Images from the probe were displayed both on a monitor screen and on a heads up display. The endoscopic probe was used to probe 36 sawbone and 22 cadaver thoracolumbar pedicles. After cannulation each specimen was examined to assess nonvisualized pedicle perforation. In sawbones, perforation was visualized endoscopically in 3 pedicles (8%) with no further perforations found on later direct examination. In cadavers the cortical cancellous interface was adequately visualized and no perforations occurred. These preliminary results suggest that the endoscopic probe may have utility in the placement of thoracolumbar pedicle screws.

Explore related subjects

Bone Screws Endoscopes Equipment Design Humans Lumbar Vertebrae Morbidity Spinal Cord Injuries Spine Journal Article

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

E H Frank, D L Chamberland. 1997. An endoscopic pedicle probe: preliminary development.. https://doi.org/10.1080/01616412.1997.11740877

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Experimental validation of noninvasive referencing in navigated procedures on long bones.

Navigation procedures in orthopedic surgery require fixation of reference markers to the anatomic region of interest. Inadequate fixation might lead to micromotion or loosening of the reference marker, consequently causing registration failures or errors in navigation. Osseous rigid fixation is usually achieved by minimally invasive Schanz screws or pins. The goal of this study was to evaluate a non invasive external fixation device, a headband so far used in cranial navigation, as an alternative invasive fixation technique to reference markers in the femur. A common navigation system with an adapted trauma software application was used to track the positions of the soft tissue-attached headband relative to an invasive reference marker on the femur during manipulations of the thigh. Relative translative and rotational movements of the headband were measured during defined movements of the hip and knee and manipulations of the headband itself. The results revealed high translative and rotational movements, up to 6 mm and 3 degrees , respectively, due to minor manipulations of the affected lower extremity. Noninvasive soft tissue fixation with a headband does not allow rigid fixation for accurate navigated registration or operative procedures at the femur. Necessary intraoperative movements or manipulations would cause substantial registration failures. Invasive fixation techniques with screws or pins are still the method of choice.

Bone Screws↗

PubMed2007

Safety of computer-assisted surgery for cannulated hip screws.

Computer-assisted orthopaedic surgery has developed considerably during the past few years. Several manufacturers produce hardware and software for use in trauma surgery. Validation of these systems before clinical application is mandatory to be sure they work accurately and safely. The accuracy of surgical performance is highly correlated with the cut-out percentages of hip screws. In a standardized operative setting, three cannulated hip screws were inserted in each of 20 sawbones. The screws were positioned either by fluoroscopic navigation technique or by conventional operative technique depending on randomization. Our primary aim was to assess whether computer-navigated screw fixation is equally safe compared with conventional screw fixation using fluoroscopy. To determine safety, we investigated number of drilling attempts, screw position, and radiation time. Secondary to these safety parameters, we also compared the operating time between the two procedures to assess the efficiency of computer navigation. Statistical analysis showed no differences regarding accuracy of screw position. Computer-assisted surgery resulted in fewer drilling attempts and less radiation time, with a similar operation time. We believe the currently used navigation system is safe and accurate.

Bone Screws↗

PubMed2007

Techniques of posterior C1-C2 stabilization.

Instability of the atlantoaxial complex may result from inflammatory, traumatic, congenital, neoplastic, or degenerative disorders and often requires surgical stabilization. Initial dorsal wiring techniques allow safe fixation but require rigid external immobilization and have been associated with high fusion failure rates. Rigid screw fixation techniques including transarticular screw fixation and C1-C2 rod-cantilever fixation offer higher fusion rates and less need for rigid immobilization but are more technically demanding. C1-C2 fixation using crossing C2 laminar screws offers rigid fixation but without the technical demands of C2 pars placement. The history and techniques of dorsal fixation of the atlantoaxial complex are reviewed, and the success rates and complications of each are discussed.

Bone Screws↗