PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 9532529

Fluid-bed microencapsulation of ascorbic acid.

Z Knezevic·D Gosak·M Hraste·I Jalsenjak
View original source ↗Export metadata ↓

Abstract

Ascorbic acid has been fluidized and microencapsulated with three different hydrophobic coating materials by the top-spray method. The experiments were conducted with polymethacrylate coating material formulated as a water dispersion, and ethyl-cellulose and waxy coating material both formulated as organic solutions. Characteristics of the fluidized bed procedure in conical geometry have been determined by estimation of two parameters: bed porosity and total pressure drop. A satisfactory agreement between experimental and calculated values has been reached. The following properties of the microencapsulated ascorbic acid have been determined: core content, bulk and tapped density, crystal size distribution prior and after microencapsulation, surface morphology and release profile. The comparison and evaluation of different hydrophobic coating materials have been performed on the basis of these findings.

Explore related subjects

Ascorbic AcidCapsulesDrug CompoundingMethylcellulosePolymethacrylic AcidsPorosityStearatesTemperatureJournal Article

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Z Knezevic, D Gosak, M Hraste, I Jalsenjak. Fluid-bed microencapsulation of ascorbic acid.. https://doi.org/10.3109/02652049809006853

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2024

Effect of light on ascorbic acid biosynthesis and bioinformatics analysis of related genes in Chinese chives.

Ascorbic acid (AsA) is an essential nutritional component and powerful antioxidant in vegetables, and in plants, AsA levels are regulated by light. AsA levels in the leaves of Chinese chive (Allium tuberosum Rottler ex Spr), a popular vegetable, are poorly understood. Thus, this study was performed to assess the influence of light on AsA biosynthesis in chive and select related genes (AtuGGP1 and AtuGME1); in addition, bioinformatic analyses and gene expression level assays were performed. The biological information obtained for AtuGGP1 and AtuGME1 was analysed with several tools, including NCBI, DNAMAN, and MEGA11. After different light treatments were performed, the Chive AsA content and AtuGGP1 and AtuGME1 expression levels were determined. These results suggest that 1) compared with natural light, continuous darkness inhibited AsA synthesis in chives. 2) The amino acid sequences of AtuGGP1 and AtuGME1 are very similar to those of other plants. 3) The trends observed for the expression levels of AtuGGP1 and AtuGME1 were consistent with the AsA content observed in chives. Hence, we speculated that light controls AsA biosynthesis in chives by regulating AtuGGP1 and AtuGME1 expression. This study provided impactful and informative evidence regarding the functions of GGP and GME in chives.

Ascorbic Acid↗
PubMed2003

Comparison of the compression characteristics between new one-step dry-coated tablets (OSDRC) and dry-coated tablets (DC).

One-step dry-coated tablets (OSDRC) were prepared using materials which are generally used in pharmaceutical tablets. The radial tensile strength of OSDRC was measured for various compression pressures and core porosities before the final compression to compare with that of conventional dry-coated tablets (DC). Furthermore, stress relaxation in the compression process was investigated. Radial tensile strength and stress relaxation profiles of OSDRC were the same as those of conventional DC. X-ray computerized tomography (CT) of the tablets showed that the density distribution of both tablets was also the same. Thus, we concluded that OSDRC and conventional DC have the same compression characteristics and physical properties. The OSDRC-system was executed by the use of upper and lower punches, which had a double structure, a center punch, and an outer punch surrounding the center punch. The OSDRC process consists of three compressions to make the lower-outer layer (1st-outer layer), the core, and the whole tablet including the upper-outer and side-outer layers (2nd-outer layer). At first, the powder for the 1st-outer layer fills a space, which is made by the lower-center punch and lower-outer punch, and is pre-compressed by the upper-center punch. Then, while the upper-center punch pushes the pre-compressed 1st-outer layer, the lower-center punch is slid down. The upper-center punch is then pulled away to make a space, which is filled with the powder for the core. This is then pre-compressed by the upper-center punch. Finally, the lower-outer punch is slid downward and the powder for the 2nd-outer layer fills and surrounds the pre-compressed core/1st-outer layer completely. The core/1st-outer layer and the 2nd-outer layer complex is then compressed by the upper and lower punches in which the center punches are unified with the outer punches, respectively. This system can be assembled onto the turn table of a rotary tableting machine, and can make a dry-coated tablet in a single turn.

Ascorbic Acid↗
PubMed2003

Changes in broccoli (Brassica oleracea L. Var. italica) health-promoting compounds with inflorescence development.

Changes in phenolic compounds, total glucosinolates, and vitamin C were monitored during the productive period along five inflorescence development stages of three broccoli commercial cultivars (Marathon, Monterrey, and Vencedor). In an attempt to identify differences due to agronomic factors, broccoli cultivars were grown under different sulfur fertilization with poor (15 kg/ha) and rich (150 kg/ha) rates. Phenolic compounds and vitamin C concentrations showed, in all broccoli cultivars, a rising trend from the first stage until the over-maturity stage, both for rich and poor sulfur fertilization. Significant differences were detected in the first two stages between rich and poor sulfur fertilization in total glucosinolates for all broccoli cultivars, where the highest concentration was always observed in the second development stage (used as minimally processed product) during poor fertilization. With regard to the last three stages, the glucosinolate concentration in the poor sulfur fertilization started to slope down until the over-maturity stage. Where rich sulfur fertilization is concerned, the highest level was reached during the third stage (used as minimally processed product also), and after that, glucosinolate concentration decreased until the fifth stage.

Ascorbic Acid↗