PubMed Health⌕ Search

PubMed · 9581055

Dipole separability in a neuromagnetic source analysis.

Abstract

By studying the ability of a one-dipole model to explain the magnetic field actually resulting from two dipoles, minimum requirements for a successful separation of two dipoles were explored. Two dipoles in different depths generally require a much higher signal-to-noise ratio (SNR) than two dipoles in the same depth. For the latter condition, the dipole distance as well as the angles between the moments and the line connecting the dipole locations (connecting line) were systematically varied. A perpendicular orientation of the two dipoles turned out to be the most favorable condition: the minimum distance required for a separation of two dipoles was more than four times smaller than for a configuration with both moments oriented parallel to the connecting line. Separability of parallel dipoles was moderately enhanced if both moments assumed an orientation perpendicular to the connecting line. The separability of two antiparallel dipoles is not limited by concurrence with a one-dipole model, but by the low signal amplitudes resulting from a mutual cancellation of the fields arising from the two dipoles, and by concurrence with a quadrupole model. The results are presented so that quantitative conclusions about dipole separability can be derived for arbitrary SNR's. The study does not generally disprove the common believe that magnetoencephalography has a relatively poor spatial resolution, but it qualifies this view by suggesting that under favorable conditions two sources with a distance of only 1 cm may be resolvable.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

B Lütkenhöner. 1998. Dipole separability in a neuromagnetic source analysis.. https://doi.org/10.1109/10.668747

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Dynamic interfacial effect of electroosmotic slip flow with a moving capillary front in hydrophobic circular microchannels.

Miniaturization of chemical analysis using microfabrication is an emerging technology. The use of polymeric materials as opposed to conventional glass substrate is also a promising alternative. As most polymeric materials are hydrophobic relative to glass, we describe here the implication for the loading process of electroosmotic flow (EOF) when a three-phase (solid-liquid-vapor) contact line exists. The presence of these interfaces can result in a large Laplace pressure that resists EOF and hence hinders its flow performance. This effect depends on the phenomenological contact angle at the solid-liquid interface. In our model for EOF, we considered simultaneously the presence of an electric double layer, liquid slips via a weaker solid-liquid interaction and Laplace pressure across a liquid-vapor interface.

Electromagnetic Fields↗

A radiofrequency glow-discharge-time-of-flight mass spectrometer for direct analysis of glasses.

A radiofrequency (rf) glow-discharge (GD) ion source coupled to a commercial on-axis time-of-flight mass spectrometer (TOFMS) has been developed for the direct analysis of non-conducting samples. Different instrumental configurations of the rf-GD source, including the optional use of a sampler cone and the possibility of allowing electrical floating of the discharge, were evaluated first with a conducting sample. Higher ion signals were obtained when the GD was electrically floating and no sampler cone was used. A homogeneous glass was then analyzed using two different rf-GD configurations--with a sampler cone and discarding the use of the sampler cone. The atomic mass spectra obtained with the TOFMS using both configurations were compared. Analyte signals were systematically higher for the latest mode which avoids the sampler cone. The analytical capability of the proposed rf-GD-TOFMS system for the analysis of thick glasses, up to 6 mm, has been investigated in terms of sensitivity, isotopic ratio accuracy, and mass-resolving power. Different homogeneous glasses (including glasses as thick as 6 mm) have been analyzed and major and minor elements were detected. Isotope ratio accuracies of about +/-1% and mass resolving powers of about 700 were observed.

Electromagnetic Fields↗