PubMed · 9841212
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
D E Fleming. 1998. Lead speciation and occupational exposure.. https://doi.org/10.1289/ehp.106-1533152
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
Organophosphate esters (OPEs), widely used as flame retardants and plasticizers, have been increasingly detected in aquatic environments. However, investigations of their distribution in high-altitude plateau lakes remain scarce. Identifying and quantifying the sources and associated risks of OPEs are crucial for subsequent water environment management. In this study, an integrated source-risk analysis approach was employed by combining the Positive Matrix Factorization (PMF) model, the Geodetector (GD) model, and risk quotient (RQ). Analysis of 14 OPEs in surface waters of the Dianchi Lake Basin (DLB) revealed 12 detectable compounds, with total OPEs concentrations (ΣOPEs) ranging from not detected (ND)-64.6 ng/L during the wet season and ND-35.8 ng/L during the dry season. Elevated ΣOPEs were primarily observed at inflow sites in the northern part of the lake and in urban rivers. Source apportionment indicated four major contributing sources: agricultural films containing flame-retardant and plasticizer additives, traffic-related particulate emissions, releases from household and personal care products, and industrial production and applications of flame retardants in plastics, electronics, and related products (the predominant source). The ecological impact caused by OPEs ranges from no risk to low risk, with tris(2-chloroethyl) phosphate emitted from industrial source being the primary driver of potential environmental risk. These findings highlight the necessity of prioritizing industrial sources in future management strategies. Overall, this study provides a methodological framework for source apportionment and risk assessment of OPEs and offers scientific evidence to support environmental management of OPEs in the DLB.
Studies of the suspended and dissolved phases of the pond water, material collected from sediment traps, and surficial sediments/tailings from the flooded tailings pond at Stekenjokk have been performed. The aim was to characterise the material, to study the seasonal variations and to quantify possible resuspension of the tailings in the pond. The element concentrations in the pond at Stekenjokk seem to be largely controlled by processes controlling the precipitation and dissolution of Mn- and Fe-oxyhydroxides in both the water column and in the surficial tailings. Physiochemical processes such as weathering of silicates on the surrounding mountain slopes or dykes contributes both dissolved elements and detrital particles. The suspended phase consists of detrital silicate material as well as Fe- and Mn-oxyhydroxides. The average heavy metal concentrations are high, e.g. 0.42% Cu, 0.15% Pb and 3.1% Zn, which is probably due to sorption onto Fe- and Mn-oxyhydroxides. The suspended phase is richer in Fe, and particularly Mn, during the winter. The suspended phase resembles the material collected in sediment traps and the material in the surficial sediments. The pond water is well mixed during the ice-free season. The dissolved heavy metal concentrations are generally rather low with, e.g. maximum concentrations of 2.03 micrograms/l Cu, 0.23 microgram/l Pb and 268 micrograms/l Zn during the winter. Higher dissolved concentrations are found below the ice-cover above the sediment surface during the winter, caused by diffusion of elements from the sediment-water interface up into the pond water. Most of the metals occurring in the pond are dissolved and resuspension of tailings is negligible.
The feasibility of three sequential extraction schemes (a modification of the Tessier procedure, the scheme proposed by Meguellati and the protocol designed by BCR (now called the Standards, Measurements and Testing Programme, M&T) have been compared to study the distribution of As, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb and Zn in sediment samples. The comparison has been performed by analyzing Certified Reference Material (CRM-601), a test material (S-12) and seven sediments from the Odiel Marshes Natural Park (located at the Atlantic coast of southern Spain). Samples were classified as sandy (with low iron oxide and organic matter contents) and clay-silty (with high iron oxide and organic matter contents) sediments. A higher metal mobility, especially under reducing conditions, was more properly assessed using the modified Tessier scheme compared to both the BCR and Meguellati procedures, these two later presenting comparative results for the reducible and residual phases. Significant Hg losses were found using the BCR procedure but the quantification of the acid phase for Cd, Cr and Ni was more reliable than that obtained with the modified Tessier and Meguellati schemes.