PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “layer”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17Linked to original sources

The role of the yolk syncytial layer in germ layer patterning in zebrafish.

Formation of the three germ layers requires a series of inductive events during early embryogenesis. Studies in zebrafish indicate that the source of these inductive signals may be the extra-embryonic yolk syncytial layer (YSL). The characterization of genes encoding the nodal-related factor, Squint, and homeodomain protein, Bozozok, both of which are expressed in the YSL, suggested that the YSL has a role in mesendoderm induction. However, these genes, and a second nodal-related factor, cyclops, are also expressed in the overlying marginal blastomeres, raising the possibility that the marginal blastomeres can induce mesendodermal genes independently of the YSL. We have developed a novel technique to study signaling from the YSL in which we specifically eliminate RNAs in the YSL, thus addressing the in vivo requirement of RNA-derived signals from this region in mesendoderm induction. We show that injection of RNase into the yolk cell after the 1K cell stage (3 hours) effectively eliminates YSL transcripts without affecting ubiquitously expressed genes in the blastoderm. We also present data that indicate the stability of existing proteins in the YSL is unaffected by RNase injection. Using this technique, we show that RNA in the YSL is required for the formation of ventrolateral mesendoderm and induction of the nodal-related genes in the ventrolateral marginal blastomeres, revealing the presence of an unidentified inducing signal released from the YSL. We also demonstrate that the dorsal mesoderm can be induced independently of signals from the YSL and present evidence that this is due to the stabilization of (&bgr;)-catenin in the dorsal marginal blastomeres. Our results demonstrate that germ layer formation and patterning in zebrafish uses a combination of YSL-dependent and -independent inductive events.

Animals↗

New layer-by-layer multilayer design method.

A new layer-by-layer multilayer design method is presented. The method is demonstrated mathematically and makes possible the optimization of the multilayer for the highest possible reflectance either at normal incidence or at nonnormal incidence for s- or p-polarized radiation. With the current method multilayers can be designed regardless of the number of different materials used. The optimum layer thickness is determined by means of functions suitable for implementation in a computer code. The new multilayer design method is fast and accurate.

Journal Article↗

Biomedical applications of electrostatic layer-by-layer nano-assembly of polymers, enzymes, and nanoparticles.

The introduction of electrostatic layer-by-layer (LbL) self-assembly has shown broad biomedical applications in thin film coating, micropatterning, nanobioreactors, artificial cells, and drug delivery systems. Multiple assembly polyelectrolytes and proteins are based on electrostatic interaction between oppositely charged layers. The film architecture is precisely designed and can be controlled to 1-nm precision with a range from 5 to 1000 nm. Thin films can be deposited on any surface including many widely used biomaterials. Microencapsulation of micro/nanotemplates with multilayers enabled cell surface modification, controlled drug release, hollow shell formation, and nanobioreactors. Both in vitro and in vivo studies indicate potential applications in biology, pharmaceutics, medicine, and other biomedical areas.

Biomimetic Materials↗

Extended-range glucose biosensor via layer-by-layer assembly incorporating gold nanoparticles.

We report on a glucose oxidase (GOx)/polyelectrolyte (PE)/gold nanoparticle (AuNP) multilayer films that can be utilized as efficient glucose biosensors by layer-by-layer self-assembly method. Electrochemical impedance spectroscopy (EIS) and UV-visible spectroscopy were adopted to monitor the regular growth of the multilayer films. The role of gold nanoparticles integrated in the multilayer films not only increase the amount and activity of GOx, but also significantly improve the electron-transfer characteristics of the films. The performance of the multilayer films for sensing glucose could be tailored by controlling the gold nanoparticles loading in the film and the number of layers. A biosensor constructed by four poly(dimethyldiallylammonium chloride) (PDDA)/AuNP/PDDA/GOx multilayer films exhibited a wide linear calibration range from 0 to 60.0 mM with the detection limit of 3.0 microM for the detection of glucose. The dynamic range can be extended up to 120 mM. The biosensor has good stability and reproducibility.

Absorption↗

Double layer versus single layer intestinal anastomosis: a clinical trial.

One hundred and seventy two cases requiring bowel resection for various intestinal conditions were randomly selected for use of the double or single layer technique, for the end-to-end anastomosis. It was observed that the return of bowel function was quicker in the single layer group than in the double layer group, and the incidence of anastomotic leakage was lower in the former group.

Adult↗

[The quantitative detection of estrogens and antithyroid drugs by thin-layer and high performance thin-layer chromatography in animal tissue (author's transl)].

Methods of thin-layer chromatography (TLC) and high-performance thin-layer chromatography (HPTLC) were developed for the determination of estrogens and antithyroid drugs in extracts of animal tissues. TLC proved to be suitable for quantities in the range of 200-2000 ng, with a detection limit of 50-200 ng, HPTLC in the range of 10-200 ng, showing calibration curves of good linearity even in extracts. By HPTLC better detection limits, better separation and faster ascending could be achieved than by TLC.

Animals↗

Thin-layer chromatography of chlorophylls and their derivatives on cellulose layers.

A method for the separation and identification of chlorophyll a and b, pheophytin a and b, pheophorbide a and b, chlorin e6, rhodin g7, and the corresponding chlorophyll a' and b' derivatives, as well as the saponification products of pheophorbide a and b, by thin-layer chromatography on commercial cellulose layers on the micro-scale has been developed. Two solvent systems were used: light petroleum (b.p.60-80 degrees)-pyridine (9:1, v/v) and n-heptane-pyridine (7:3, v/v). The former was suitable for chlorophylls, pheophytins and pheophorbides, and the latter for pheophorbides, chlorin, rhodin and their esters. The separation of the derivatives was good and no chemical alteration of the derivatives could be observed. The method is rapid and easy to use and is therefore suitable for checking the purity of derivatives during the preparation of chlorophylls and their derivatives.

Cellulose↗

Evaluation of a multiple-variable thin-layer and reversed-phase thin-layer chromatographic scheme for identification of basic and neutral drugs in an emergency toxicology setting.

An analytical scheme composed of one normal-phase thin-layer chromatographic (TLC) method, one reversed-phase thin-layer chromatographic (RPTLC) method, and sequential analyte detection through four stages of color reactions is described. Eighty-one basic or neutral drugs were analyzed with this scheme and seventy-four were uniquely characterized with 95% confidence. Six of the remaining seven formed three unresolved pairs. The scheme was evaluated by mean list length analysis and shown to offer analyte resolution similar to that of a scheme of TLC and gas chromatography (GC) with nonspecific detection. Nine out of ten unknowns from the field of eighty-one drugs were uniquely identified with 95% confidence by the TLC/RPTLC scheme. The tenth unknown was not completely resolved from its isomer, but was statistically the more probable candidate.

Chromatography, Thin Layer↗

Advances in analytical techniques for neutron capture therapy: thin layer chromatography matrix and track etch thin layer chromatography methods for boron-10 analysis.

A new track etch autoradiographic technique for quantitating boron-10 containing compounds used for neutron capture therapy is described. Instead of applying solutions of Cs2B12H11SH and its oxidation products directly to solid-state nuclear track detectors, diethylaminoethyl cellulose thin layer chromatography (TLC) plates are utilized as sample matrices. The plates are juxtaposed with Lexan polycarbonate detectors and irradiated in a beam of thermal neutrons. The detectors are then chemically etched, and the resultant tracks counted with an optoelectronic image analyzer. Sensitivity to boron-10 in solution reaches the 1 pg/microliter level, or 1 ppb. In heparinized blood samples, 100 pg boron-10/microliter are detected. This TLC matrix method has the advantage that sample plates can be reanalyzed under different reactor conditions to optimize detector response to the boron-10 carrier material. Track etch/TLC allows quantitation of the purity of boron neutron capture therapy compounds by utilizing the above method with TLC plates developed in solvent systems that resolve Cs2B12H11SH and its oxidative analogs. Detectors irradiated in juxtaposition to the thin layer chromatograms are chemically etched, and the tracks are counted in the sample lane from the origin of the plate to the solvent front. A graphic depiction of the number of tracks per field yields a quantitative analysis of compound purity.

Boron↗

Preparation for TEM of layered samples with fragile microstructure and weak layer interface.

The objective of this work was to prepare for transmission electron microscopy (TEM) a layered structure of materials with fragile microstructure. The samples consisted of two layers of different materials, silicon nitride and borosilicate glass, loosely bonded together. The low strength of the sample resulted in fragmentation during more conventional preparation. However, it was possible to prepare the fragments by mounting them in a titanium specimen carrier with aluminium strips as support. After grinding and polishing, a technique of low-angle ion milling was used to obtain electron beam transparent areas at the nitride/glass interface.

Microscopy, Electron↗

Layer-by-layer deposition of rhenium-containing hyperbranched polymers and fabrication of photovoltaic cells.

Multilayer thin films were prepared by the layer-by-layer (LBL) deposition method using a rhenium-containing hyperbranched polymer and poly[2-(3-thienyl)ethoxy-4-butylsulfonate] (PTEBS). The radii of gyration of the hyperbranched polymer in solutions with different salt concentrations were measured by laser light scattering. A significant decrease in molecular size was observed when sodium trifluoromethanesulfonate was used as the electrolyte. The conditions of preparing the multilayer thin films by LBL deposition were studied. The growth of the multilayer films was monitored by absorption spectroscopy and spectroscopic ellipsometry, and the surface morphologies of the resulting films were studied by atomic force microscopy. When the pH of a PTEBS solution was kept at 6 and in the presence of salt, polymer films with maximum thickness were obtained. The multilayer films were also fabricated into photovoltaic cells and their photocurrent responses were measured upon irradiation with simulated air mass (AM) 1.5 solar light. The open-circuit voltage, short-circuit current, fill factor, and power conversion efficiency of the devices were 1.2 V, 27.1 mu A cm(-2), 0.19, and 6.1x10(-3) %, respectively. The high open-circuit voltage was attributed to the difference in the HOMO level of the PTEBS donor and the LUMO level of the hyperbranched polymer acceptor. A plot of incident photon-to-electron conversion efficiency versus wavelength also suggests that the PTEBS/hyperbranched polymer junction is involved in the photosensitization process, in which a maximum was observed at approximately 420 nm. The relatively high capacitance, determined from the measured photocurrent rise and decay profiles, can be attributed to the presence of large counter anions in the polymer film.

Journal Article↗

In vitro hemocompatibility of albumin-heparin multilayer coatings on polyethersulfone prepared by the layer-by-layer technique.

Polyethersulfone foils (PES)--a unique material for blood purification membranes--were coated with a multilayer assembly of heparin (unfractionated or high anticoagulant activity fraction heparin) and albumin (albumin-heparin coatings), or with a multilayer of albumin (albumin coating), using the layer-by-layer technique. The coatings combine advantages of albumin (reduction of nonspecific interactions) and heparin (specific interactions with blood coagulation proteins). The differences between the two heparins, while significant for their biological activity, had only a minor effect on the multilayer assembly with albumin monitored in situ by reflection infrared spectroscopy (FTIR MIRS). Uncoated as well as modified PES surfaces were evaluated using an in vitro assay with freshly drawn, slightly heparinized (1.5 IU heparin/mL) human whole blood. The blood was circulated with a roller pump over the sample surfaces in shear flow across rectangular slit channels ( app. 6 mL/min and 120 s(-1)) for 1.5 h at 37 degrees C. All coatings effectively reduced platelet adhesion and activation according to the PF4 release. The activation of coagulation evaluated as TAT generation was significantly lowered for the coating composed of albumin and high activity heparin. A further beneficial effect of the heparin containing coatings was reduced complement activation as determined by different complement fragments.

Albumins↗

Construction of antibacterial multilayer films containing nanosilver via layer-by-layer assembly of heparin and chitosan-silver ions complex.

Antibacterial multilayer films containing nanosilver were prepared via layer-by-layer fashion. PET film was aminolyzed with 1,6-hexanediamine to introduce amino groups on PET film surface; chitosan-silver nitrate complex and heparin were alternately deposited onto an aminolyzed PET film surface, and subsequently, the silver ions within the multilayer films were reduced with ascorbic acid to form silver nanoparticles. UV-visible spectroscopy and transmission electron microscopy confirmed the formation of well-dispersed nanosilver particles with sizes (10-40 nm) that depended on the initial concentration of silver ions in chitosan solution and the pH of ascorbic acid solution. The chitosan/heparin multilayer films were possessed of bactericidal effect on Escherichia coli (E. coli), and this antibacterial effect could be significantly enhanced by the incorporation of silver nanoparticles into the multilayer films. The multilayer films containing nanosilver were not only effective as antibacterial but also as anticoagulant coating. And cell toxicity evaluation suggested that the multilayer films containing nanosilver did not show any cytotoxicity. The multilayer films containing nanosilver may have good potentials for surface modification of medical devices, especially for cardiovascular implants.

Animals↗

Layer-by-layer assembly of polyelectrolyte films improving cytocompatibility to neural cells.

The using of layer-by-layer assembly polyelectrolyte (PE) films has been suggested as a new versatile technique for surface modification aimed at tissue engineering and cell-based chips. In this study, we investigated the surface morphology of the hyaluronic acid (HA)-based PE films deposited on the amino-functionalized glass slides using atomic force microscopy. These thin films (bilayer number <9) were measured to have nanoscale roughness ranging from 10 to 100 nm. Then the primary hippocampal and cortical neural cells were cultured on the PE films, respectively. After 5 days of culturing, the cytocompatibility to neural cells was evaluated by cellular morphology, neurite outgrowth, and microtubule-associated protein 2 expressions. From the present results, the HA-based PE films were found to be able to support neural cell adhesion and neurite development, especially for the polycation-ending films. It is suggested these HA-based multilayer PE films or similar build-ups could thus be used in the future as a way to modify surfaces for nerve scaffolds and neuron-based chips.

Animals↗

Microgel-based engineered nanostructures and their applicability with template-directed layer-by-layer polyelectrolyte assembly in protein encapsulation.

A novel strategy for the fabrication of microcapsules is elaborated by employing biomacromolecules and a dissolvable template. Calcium carbonate (CaCO(3)) microparticles were used as sacrificial templates for the two-step deposition of polyelectrolyte coatings by surface controlled precipitation (SCP) followed by the layer-by-layer (LbL) adsorption technique to form capsule shells. When sodium alginate was used for inner shell assembly, template decomposition with an acid resulted in simultaneous formation of microgel-like structures due to calcium ion-induced gelation. An extraction of the calcium after further LbL treatment resulted in microcapsules filled with the biopolymer. The hollow as well as the polymer-filled polyelectrolyte capsules were characterized using confocal laser scanning microscopy (CLSM), scanning electron microscopy (SEM), and scanning force microscopy (SFM). The results demonstrated multiple functionalities of the CaCO(3) core - as supporting template, porous core for increased polymer accommodation/immobilization, and as a source of shell-hardening material. The LbL treatment of the core-inner shell assembly resulted in further surface stabilization of the capsule wall and supplementation of a nanostructured diffusion barrier for encapsulated material. The polymer forming the inner shell governs the chemistry of the capsule interior and could be engineered to obtain a matrix for protein/drug encapsulation or immobilization. The outer shell could be used to precisely tune the properties of the capsule wall and exterior. [Diagram: see text] Confocal laser scanning microscopy (CLSM) image of microcapsules (insert is after treating with rhodamine 6G to stain the capsule wall).

Alginates↗

Assembly of electroactive layer-by-layer films of myoglobin and ionomer poly(ester sulfonic acid).

Layer-by-layer films were assembled on solid substrates by alternate adsorption of negatively charged ionomer poly(ester sulfonic acid) or Eastman AQ55 from its aqueous dispersion and positively charged myoglobin (Mb) from its solution at pH 4.5. The film assembly process was monitored by cyclic voltammetry (CV), UV-vis spectroscopy, and quartz crystal microbalance (QCM). [AQ/Mb](n) films grown on pyrolytic graphite (PG) electrodes showed a pair of well-defined and nearly reversible CV peaks at about -0.20 V vs Ag/AgCl in pH 5.5 buffers, characteristic of the Mb heme Fe(III)/Fe(II) redox couple. Although the amount of Mb adsorbed in each bilayer was essentially the same, the fraction of electroactive Mb decreased dramatically with an increase of bilayer number (n). Soret absorption bands of [AQ/Mb](n) films on glass slides suggest that Mb in the films retains its native state in the medium pH range. Trichloroacetic acid, oxygen, and hydrogen peroxide were electrochemically catalyzed by [AQ/Mb](6) films with significant lowering of reduction overpotential.

Adsorption↗

Pigmentoarchitectonic pathology of the isocortex in juvenile neuronal ceroid-lipofuscinosis: axonal enlargements in layer IIIab and cell loss in layer V.

Pigment preparations of 800 micrometer thickness and Golgi studies of the isocortex in juvenile neuronal ceroid-lipofuscinosis, morphologically proven by electron microscopy, revealed: 1. giant axonal dilatations of IIIab-pyramids. These expansions exceeded by far those found in pyramidal cell axons of other isocortical layers. 2. severe numerical reduction of neurons in the ganglionic layer.

Adolescent↗

Assembly of layer-by-layer films of heme proteins and single-walled carbon nanotubes: electrochemistry and electrocatalysis.

After being treated by mixed acids, single-walled carbon nanotubes (SWNTs) were shortened and had negatively charged groups on the surface. Positively charged hemoglobin or myoglobin at pH 5.0 was successfully assembled with SWNTs into layer-by-layer films on solid surfaces, designated as {SWNT/protein}n. While only those proteins in the first few bilayers closest to the electrode surface exhibited electroactivity, the {SWNT/protein}n films demonstrated a much higher fraction of electroactive proteins and better controllability in film construction compared with cast films of the proteins and carbon nanotubes. The proteins in the {SWNT/protein}n films retained their near-native structure at medium pH. The stable protein film electrode showed good electrocatalytic properties toward reduction of oxygen and hydrogen peroxide, demonstrating the potential application of the {SWNT/protein}n films as a new type of biosensor based on the direct electrochemistry of proteins without using mediators.

Acids↗