PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Single Molecule Imaging”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18Linked to original sources

Nanomanipulation of extended single-DNA molecules on modified mica surfaces using the atomic force microscopy.

The technique of nanometer scale manipulation is very important in constructing nano-structures and nano-devices. By using atomic force microscope, three kinds of controllable manipulation on single-DNA molecules were introduced in the paper. DNA molecules deposited and extended on modified mica surface were first imaged by tapping mode, then cutting, bending, and pushing were respectively performed on single-DNA molecules. The results of the manipulation depend on the interaction between tip and DNA as well as between substrate and DNA.

Aluminum Silicates↗

Transchip: single-molecule detection of transcriptional elongation complexes.

A new single-molecule system, Transchip, was developed for analysis of transcription products at their genomic origins. The bacteriophage T7 RNA polymerase and its promoters were used in a model system, and resultant RNAs were imaged and detected at their positions along single template DNA molecules. The Transchip system has drawn from critical aspects of Optical Mapping, a single-molecule system that enables the construction of high-resolution ordered restriction maps of whole genomes from single DNA molecules. Through statistical analysis of hundreds of single-molecule template/transcript complexes, Transchip enables analysis of the locations and strength of promoters, the direction and processivity of transcription reactions, and the termination of transcription. These novel results suggest that the new system may serve as a high-throughput platform to investigate transcriptional events on a large genome-wide scale.

Bacteriophage T7↗

A surrogate hepatitis B virus antigenic epitope represented by a synthetic peptide and an internal image antiidiotype antibody.

The use of molecules that represent single, defined epitopes able to substitute for antigen (i.e. surrogate antigens) offers considerable advantages over the use of native antigen for the precise manipulation of the immune response. We have investigated the immunochemical characteristics of two types of surrogate hepatitis B surface antigen (HBsAg) epitopes: (a) linear and cyclical synthetic peptides representing amino acid residues 139-147, a hydrophilic region corresponding to part of the a determinant of the HBsAg, and (b) four monoclonal antiidiotypes raised against anti-HBs mAb, two of which behave as an internal image of an a determinant. Polyclonal anti-HBs antisera bound the monoclonal antiidiotypes with affinities of the order of 10(8)/M, and to the peptides with greater than 10-fold lower affinities. However, the levels of antibody in the polyclonal antisera for the peptides was greater than for the antiidiotypes. In inhibition RIA, the surrogate antigens show concordance in that the internal image antiidiotypes inhibit the binding of both monoclonal and polyclonal anti-HBs to the linear and cyclical 139-147 peptides. These results imply that surrogate antigens could indeed be useful as potential hepatitis vaccines, but while the antiidiotypes may stimulate B cells of higher affinity, they would react with a more restricted range of B cell reactivities than would the peptides. A future HBV vaccine may thus comprise a synthetic peptide such as cyclical 139-147 or a cluster of monoclonal internal image antiidiotypes.

Animals↗

Dimeric arrangement and structure of the membrane-bound acetylcholine receptor studied by electron microscopy.

The acetylcholine receptor protein (AChR) from the electric organ of Torpedo marmorata is studied in its membrane-bound form by electron microscopy and single-particle image averaging. About half the molecule protrudes from the membrane surface by approximately 5 nm. The low-resolution 3-D structure of this hydrated portion, including its handedness, can be deduced from averaged axial and lateral projections and from freeze-etched membrane surfaces. In native membrane fragments, a dimeric form of the AChR is observed and the relative orientation of the AChR monomers within the dimer is established. The dimers disappear upon disulfide reduction of the membrane preparations, whereas the average axial projections of the AChR monomer remain unaffected. Since the existence of disulfide bonds linking AChR monomers between their respective delta-subunits is well documented, the approximate position of the delta-subunit within the low-resolution structure of the AChR molecule can be deduced from the structure of the dimers.

Animals↗

Electron microscopy of glycogen degrading enzymes.

Single molecules of glycogen phosphorylase b exhibit images in the electron microscope which are similar in shape and dimension to those derived from X-ray crystallography. Phosphorylase alpha exhibits tetramers but shows dimers in the presence of glucose. Glycogen debranching enzyme appears as a monomer with an unusual crescent or shrimp-like shape, with occasional isologous aggregation to circular dimers. The longest dimension of the monomer is very similar to that of the phosphorylase dimer, 11.5 nm. Strong binding of the debranching enzyme to glycogen is readily visualized in the electron microscope. It is suggested that the distinctive shape of the debranching enzyme may be related to its catalytic function.

Animals↗

Total internal reflection fluorescence microscopy: technical innovations and novel applications.

Recent years have seen the introduction of novel techniques and applications of total internal reflection fluorescence microscopy (TIRFM). Key technical achievements include miniaturization, enhanced depth resolution, reduction of detection volumes and the combination of TIRFM with other microscopic techniques. Novel applications have concentrated on single-molecule detection (e.g. of cellular receptors), imaging of exocytosis or endocytosis, measurements of adhesion foci of microtubules, and studies of the localization, activity and structural arrangement of specific ion channels. In addition to conventional fluorescent dyes, genetically engineered fluorescent proteins are increasingly being used to measure molecular conformations or intermolecular distances by fluorescence resonance energy transfer.

Endocytosis↗

Single molecule studies of antibody-antigen interaction strength versus intra-molecular antigen stability.

We investigated molecular recognition of antibodies to membrane-antigens and extraction of the antigens out of membranes at the single molecule level. Using dynamic force microscopy imaging and enzyme immunoassay, binding of anti-sendai antibodies to sendai-epitopes genetically fused into bacteriorhodopsin molecules from purple membranes were detected under physiological conditions. The antibody/antigen interaction strength of 70-170 pN at loading rates of 2-50 nN/second yielded a barrier width of x = 0.12 nm and a kinetic off-rate (corresponding to the barrier height) of k(off) = 6s(-1), respectively. Bacteriorhodopsin unfolding revealed a characteristic intra-molecular force pattern, in which wild-type and sendai-bacteriorhodopsin molecules were clearly distinguishable in their length distributions, originating from the additional 13 amino acid residues epitope in sendai purple membranes. The inter-molecular antibody/antigen unbinding force was significantly lower than the force required to mechanically extract the binding epitope-containing helix pair out of the membrane and unfold it (126 pN compared to 204 pN at the same loading rate), meeting the expectation that inter-molecular unbinding forces are weaker than intra-molecular unfolding forces responsible for stabilizing native conformations of proteins.

Antibodies↗

Dynamic polymorphism of single actin molecules in the actin filament.

Actin filament dynamics are critical in cell motility. The structure of actin filament changes spontaneously and can also be regulated by actin-binding proteins, allowing actin to readily function in response to external stimuli. The interaction with the motor protein myosin changes the dynamic nature of actin filaments. However, the molecular bases for the dynamic processes of actin filaments are not well understood. Here, we observed the dynamics of rabbit skeletal-muscle actin conformation by monitoring individual molecules in the actin filaments using single-molecule fluorescence resonance energy transfer (FRET) imaging with total internal reflection fluorescence microscopy (TIRFM). The time trajectories of FRET show that actin switches between low- and high-FRET efficiency states on a timescale of seconds. If actin filaments are chemically cross-linked, a state that inhibits myosin motility, the equilibrium shifts to the low-FRET conformation, whereas when the actin filament is interacting with myosin, the high-FRET conformation is favored. This dynamic equilibrium suggests that actin can switch between active and inactive conformations in response to external signals.

Actin Cytoskeleton↗

The periphery of nuclear speckles defines a spatially and temporally regulated compartment of long-lived intron-retained RNAs that resolves during mitosis.

RNA localization adds a fundamental layer to gene expression by determining when and where translation-ready mRNAs become available, yet how this timing is coordinated with nuclear architecture and cell-cycle progression remains unclear. Here we identify a subnuclear RNA niche at the nuclear speckle periphery that couples intron retention to cell-cycle-timed RNA release. Using compartment-resolved transcriptional inhibition, sequence-based deep learning and single-molecule and super-resolution RNA imaging in human pluripotent stem cells, we define a class of nuclear RNAs with long-lived retained introns that persist for hours and are enriched in transcripts encoding regulators of genome maintenance and mitosis, including centromere and kinetochore assembly, DNA repair and telomere maintenance. Long-lived retained introns exhibit elevated GC content, predicted structural stability and enrichment for nuclear speckle-associated RNA-binding proteins. In interphase, these RNAs localize to a distinct nuclear speckle-peripheral RNA niche in a spatial arrangement conserved across cell types. During mitotic remodelling, they undergo coordinated, kinase-dependent splicing and are released into the cytoplasm of early G1 daughter cells. Together, these findings link cis-encoded intronic features, subnuclear organization and mitotic remodelling to temporal control of RNA fate.

Mitosis↗

Unfolding pathways of individual bacteriorhodopsins.

Atomic force microscopy and single-molecule force spectroscopy were combined to image and manipulate purple membrane patches from Halobacterium salinarum. Individual bacteriorhodopsin molecules were first localized and then extracted from the membrane; the remaining vacancies were imaged again. Anchoring forces between 100 and 200 piconewtons for the different helices were found. Upon extraction, the helices were found to unfold. The force spectra revealed the individuality of the unfolding pathways. Helices G and F as well as helices E and D always unfolded pairwise, whereas helices B and C occasionally unfolded one after the other. Experiments with cleaved loops revealed the origin of the individuality: stabilization of helix B by neighboring helices.

Amino Acid Sequence↗

Molecular photobleaching kinetics of Rhodamine 6G by one- and two-photon induced confocal fluorescence microscopy.

Under high-excitation irradiance conditions in one- and two-photon induced fluorescence microscopy, the photostability of fluorescent dyes is of crucial importance for the detection sensitivity of single molecules and for the contrast in fluorescence imaging. Herein, we report on the dependence of photobleaching on the excitation conditions, using the dye Rhodamine 6G as a typical example. The different excitation modes investigated include 1) one-photon excitation into the first-excited singlet state in the range of 500 to 528 nm by continuous wave and picosecond-pulsed lasers and 2) two- and one-photon excitation to higher-excited singlet states at 800 and 350 nm, respectively, by femtosecond pulses. Experimental strategies are presented, which allow resolving the photophysics. From single-molecule trajectories and fluorescence correlation spectroscopy, as well as with a simple theoretical model based on steady-state solutions of molecular rate equation analysis, we determined the underlying photobleaching mechanisms and quantified the photokinetic parameters describing the dependence of the fluorescence signal on the excitation irradiance. The comparison with experimental data and an exact theoretical model show that only minor deviations between the different theoretical approaches can be observed for high-pulsed excitation irradiances. It is shown that fluorescence excitation is in all cases limited by photolysis from higher-excited electronic states. In contrast to picosecond-pulsed excitation, this is extremely severe for both one- and two-photon excitation with femtosecond pulses. Furthermore, the photostability of the higher-excited electronic states is strongly influenced by environmental conditions, such as polarity and temperature.

Biochemistry↗

[Atomic force microscopy: from cell imaging to molecular manipulation].

The atomic force microscope (AFM) allows to explore the surface of biological samples bathed in physiological solutions, with vertical and horizontal resolutions ranging from nanometers to angströms. Complex biological structures as well as single molecules can be observed and recent examples of the possibilities offered by the AFM in the imaging of intact cells, isolated membranes, membrane model systems and single molecules are discussed in this review. Applications where the AFM tip is used as a nanotool to manipulate biomolecules and to determine intra and intermolecular forces from single molecules are also presented.

Animals↗

Visualization of single and aggregated hulless oat (Avena nuda L.) (1-->3),(1-->4)-beta-D-glucan molecules by atomic force microscopy and confocal scanning laser microscopy.

Surfactants were used to disperse oat beta-glucan. Atomic force microscopy (AFM) images of the resulting samples revealed a distribution of extended chainlike molecules and allowed, for the first time, direct visualization of single oat beta-glucan molecules with cross-sectional heights of about 0.44 nm. The number-average contour length (L(n)) and root-mean-square end-to-end distance ((R(ee)2)(1/2)) measured from the AFM images were 938 and 912 nm, respectively. The calculated persistence length (L(p)) was 526 nm. The weight-average molecular weight (M(w)) calculated from single beta-glucan molecules was 4.43 x 10(5). Samples without surfactant showed a strong tendency to form aggregates. The sample concentration, reserving time, and calcofluor as well as freezing could affect the formation of aggregates. These aggregates were visualized by both AFM and confocal scanning laser microscopy. The shape of the aggregates changed from small dots with diameters of approximately 20-50 nm to microfibrils over 3 microm long with the increasing of the concentration of oat beta-glucan from 10 to 100 microg/mL. The particle size distribution obtained by a laser particle size analyzer was 926 nm, which confirmed the size of oat beta-glucan molecules obtained from AFM images.

Avena↗

Two-photon fluorescence excitation and related techniques in biological microscopy.

This review is concerned with two-photon excited fluorescence microscopy (2PE) and related techniques, which are probably the most important advance in optical microscopy of biological specimens since the introduction of confocal imaging. The advent of 2PE on the scene allowed the design and performance of many unimaginable biological studies from the single cell to the tissue level, and even to whole animals, at a resolution ranging from the classical hundreds of nanometres to the single molecule size. Moreover, 2PE enabled long-term imaging of in vivo biological specimens, image generation from deeper tissue depth, and higher signal-to-noise images compared to wide-field and confocal schemes. However, due to the fact that up to this time 2PE can only be considered to be in its infancy, the advantages over other techniques are still being evaluated. Here, after a brief historical introduction, we focus on the basic principles of 2PE including fluorescence correlation spectroscopy. The major advantages and drawbacks of 2PE-based experimental approaches are discussed and compared to the conventional single-photon excitation cases. In particular we deal with the fluorescence brightness of most used dyes and proteins under 2PE conditions, on the optical consequences of 2PE, and the saturation effects in 2PE that mostly limit the fluorescence output. A complete section is devoted to the discussion of 2PE of fluorescent probes. We then offer a description of the central experimental issues, namely: choice of microscope objectives, two-photon excitable dyes and fluorescent proteins, choice of laser sources, and effect of the optics on 2PE sensitivity. An inevitably partial, but vast, overview of the applications and a large and up-to-date bibliography terminate the review. As a conclusive comment, we believe that 2PE and related techniques can be considered as a mainstay of the modern biophysical research milieu and a bright perspective in optical microscopy.

Biology↗

Single-particle imaging of macromolecules by cryo-electron microscopy.

Cryo-electron microscopy (cryo-EM) of biological molecules in single-particle (i.e., unordered, nonaggregated) form is a new approach to the study of molecular assemblies, which are often too large and flexible to be amenable to X-ray crystallography. New insights into biological function on the molecular level are expected from cryo-EM applied to the study of such complexes "trapped" at different stages of their conformational changes and dynamical interactions. Important molecular machines involved in the fundamental processes of transcription, mRNA splicing, and translation are examples for successful applications of the new technique, combined with structural knowledge gained by conventional techniques of structure determination, such as X-ray crystallography and NMR.

Animals↗

Automatic detection of single fluorophores in live cells.

Recent developments in light microscopy enable individual fluorophores to be observed in aqueous conditions. Biological molecules, labeled with a single fluorophore, can be localized as isolated spots of light when viewed by optical microscopy. Total internal reflection fluorescence microscopy greatly reduces background fluorescence and allows single fluorophores to be observed inside living cells. This advance in live-cell imaging means that the spatial and temporal dynamics of individual molecules can be measured directly. Because of the stochastic nature of single molecule behavior a statistically meaningful number of individual molecules must be detected and their separate trajectories in space and time stored and analyzed. Here, we describe digital image processing methods that we have devised for automatic detection and tracking of hundreds of molecules, observed simultaneously, in vitro and within living cells. Using this technique we have measured the diffusive behavior of pleckstrin homology domains bound to phosphoinositide phospholipids at the plasma membrane of live cultured mammalian cells. We found that mobility of these membrane-bound protein domains is dominated by mobility of the lipid molecule to which they are attached and is highly temperature dependent. Movement of PH domains isolated from the tail region of myosin-10 is consistent with a simple random walk, whereas, diffusion of intact PLC-delta1 shows behavior inconsistent with a simple random walk. Movement is rapid over short timescales but much slower at longer timescales. This anomalous behavior can be explained by movement being restricted to membrane regions of 0.7 microm diameter.

Artificial Intelligence↗

A STORM-based protocol for nanoscale imaging and quantitative analysis of protein-associated and phospholipid-associated structures in natural rubber.

Stochastic Optical Reconstruction Microscopy (STORM) enables nanoscale mapping of molecular components beyond the diffraction limit; however, its reproducible implementation in hydrophobic polymer matrices remains challenging because fluorescence-labeling specificity, fluorophore photoswitching, three-dimensional localization, chromatic registration, and quantitative image analysis must be carefully controlled. This protocol presents a standardized experimental workflow for dual-color labeling, astigmatism-based three-dimensional STORM acquisition, and quantitative analysis of protein-associated and phospholipid-associated structures in natural rubber (NR). The workflow covers sample pretreatment, Cy5 NHS ester labeling of protein-associated primary amines, DiI labeling of phospholipid-rich domains, STORM imaging-buffer preparation, three-dimensional single-molecule localization, dual-channel registration, generation of standardized xy projections, aggregate-size analysis, and projected lateral spatial correlation assessment. Reproducibility is supported by defined acquisition and localization criteria, three independent sample preparations with at least five fields of view analyzed per condition, and unlabeled, single-color, dye-only matrix, and processing-associated Cy5 controls. Mean lateral localization precisions of 11.8 ± 2.3 nm for Cy5 and 13.5 ± 2.9 nm for DiI were obtained, while two-dimensional Fourier ring correlation analysis of the xy projections yielded effective lateral image resolutions of approximately 25 and 28 nm, respectively. Image-based particle segmentation and localization-coordinate-based density-based spatial clustering of applications with noise (DBSCAN) were applied to standardized xy projections as complementary quantitative approaches. Application of the protocol to untreated, centrifuged, and protease-treated NR samples demonstrated treatment-associated changes in the detected abundance and projected size distributions of protein- and phospholipid-associated aggregates, together with a non-monotonic change in their projected lateral spatial correlation. These observations describe alterations in nanoscale organization but do not, by themselves, establish stable protein-phospholipid complex formation. Unlike previous studies that primarily demonstrated the feasibility of STORM imaging in rubber materials, the principal contribution of this work is an end-to-end, step-by-step protocol incorporating defined controls, three-dimensional localization, image-quality metrics, chromatic-registration procedures, and complementary quantitative-analysis pipelines for non-expert users. The workflow may be adaptable to other hydrophobic polymers and soft-material systems after appropriate optimization and validation.

Rubber↗

Spontaneous assembly of bivalent single chain antibody fragments in Escherichia coli.

The ability of immunoglobulin Fab and single chain (ScFv) fragments to penetrate effectively into tissue from the vascular system has made these molecules excellent candidates as drug delivery systems and imaging tools. This study investigates the use of single chain antibody fragment bacterial expression vectors as a possible strategy for the production of these molecules. We have modified the pSW1-VHD1.3-VKD1.3-TAG1 vector [Ward et al. (1989) Nature 341, 544-546] which originally, when expressed in E. coli, produced an Fab fragment. In an effort to improve the affinity of the parent vector product a novel single chain antibody construct which encodes a protein with anti-P. aeruginosa activity was generated using a 14 amino acid linker [Chaudhary et al. (1990) Proc. natn. Acad. Sci. U.S.A. 87, 1066-1070]. In addition to the heavy and light chain variable domain genes, our construct also contained the light chain kappa constant domain gene to aid purification of the fragments. To underline this difference from the conventional ScFv fragment we have described this protein as a ScAb. The ScAb generated had an antigen binding capacity similar to the parent anti-P. aeruginosa antibody but was superior to the recombinant anti-P. aeruginosa Fab fragment. On HPLC and non-denaturing gel electrophoresis analysis, the ScAb was found to exist in multimeric forms while the Fab fragment existed only as a single unit. Dimeric ScAb had a similar antigen binding profile to the parent antibody.

Antibodies↗