PubMed Health⌕ Search

SEARCH · PubMed Health

Results for “Mandibular Reconstruction”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources
PubMed2004

Comparison of miniplates and reconstruction plates in mandibular reconstruction.

BACKGROUND: The aim of this study is to compare complication rates of miniplates versus reconstruction plates in the fixation of vascularized grafts into segmental mandibular defects. METHODS: Retrospective analysis of 143 consecutive successful microvascular composite flaps performed between 1993 and 2001 was performed. Data were gathered from a computerized database, case notes and pathology reports. Complications were classified as dehiscence, infection, plate or bone removal. RESULTS: In the series, 49% of patients received miniplates, and 51% received plates. No significant differences in complication rates were found between those grafts fixed with miniplates (27%) and those with reconstruction plates (30%). Plate choice was primarily determined by consultant preference. No significant differences were found in patient, defect, treatment, or follow-up characteristics between the plate groups. Twenty-nine percent of patients had at least one late complication at the reconstructed site, and this was higher (39%) in those who had postoperative radiotherapy. CONCLUSIONS: No evidence was found in this study that the increased rigidity offered by reconstruction plates influences the rate of plate or bone removal, infection, or plate exposure. Thus, the decision to use reconstruction or miniplates is not dependent on the rate of plate complications.

Adult↗
PubMed1993

[Titanium plates for mandibular reconstruction and radiotherapy].

Mandibular reconstruction plates are now used after cancer surgery in particular patients. This study assesses the irradiation of Titanium mandibular reconstruction plates in terms of both dosimetry and mid-term tolerance. Twenty patients with mandibular plates underwent radiotherapy (mean dose 60 Gy). The radiation dose on the patient itself was calculated with 3-dimensional treatment planning. A clinical and radiological evaluation of tolerance was made 6 months after the end of the treatment: intraoral and cutaneous healing and possible osteomyelitis. Mid-term tolerance was very satisfactory with only two failures at 6 months. When using parallel opposing fields, the overdosage into tissues was reduced to approximately 5 p. cent; and radiotherapy has probably no effect on titanium plate tolerance.

Adult↗
PubMed1998

[3-dimensional computed tomography with model preparation before mandibular reconstruction].

Extended mandibular defects resulting from cancer resection are amenable to reconstruction with a free vascularized bone graft transplantation. Between 1992 and 1995, 12 patients were enrolled in a protocol including a preoperative 3D-CT used to develop a custom-made acrylic model of the mandible. Besides contributing to the assessment of tumor extension, 3D-CT helps determine the adequate limits of mandibular resection. 3D-CT has the advantage of providing the surgeon with a more familiar image of the mandible and the mandibular model, allowing better and quicker conformation of the bone flap. The graft can be shaped at the donor site before cutting its vascular pedicle, resulting in a shorter period of ischemia. This series demonstrated that preoperative mandibular modeling with 3D-CT helps improve functional and cosmetic results in mandibular reconstruction.

Acrylic Resins↗
PubMed1994

Major mandibular reconstruction with vascularized bone grafts: indications and selection of donor tissue.

Free vascularized bones have been shown by many specialists to exhibit specific capabilities of reconstructing a major mandibular defect and can solve problems that may be insoluble by other methods. Nevertheless, absolute indications for using vascularized bone for major mandibular reconstructions have not been sufficiently well delineated to convince people of always considering vascularized bone for major mandibular reconstructions as a first option. Based on our experience with 55 major mandibular reconstructions, we might delineate the absolute indications for using free vascularized bone for major mandibular reconstructions explicitly: 1) osteoradionecrosis of mandible or on irradiated tissue bed; 2) hemimandibular reconstruction with a free end facing the glenoid fossa; 3) long segment mandibular defect, especially across the symphysis; 4) inadequate skin or mucosal lining; 5) defects demanding sandwich reconstruction; 6) inability to obtain secure immobilization on the reconstructed unit; 7) failure of reconstruction by other methods; 8) near total mandibular reconstruction. Selection of donor tissue should be according to 1) the amount of tissue deficiencies, 2) composition of the defect, 3) design and placement of the flap, 4) irradiation on the recipient site or not, 5) which vessels to be used, 6) which flap has the appropriate vessel length 7) skin color and texture of the donor tissue, 8) how many osteotomies required to stimulate the curvature of the resected mandible 9) speed of bony union, 10) feasibility of future osseointegration. We have used three kinds of vascularized bones (iliac bone, fibula, scapula). Iliac bone was most frequently used, and has always been our first choice, since it can carry good quality bone, a large skin flap, and ample soft tissue. The fibula has the merit of being less bulky and good for simultaneous intraoral lining, but the contour is more rigid and the bony height is insufficient. The scapula bone is rarely used at present because of its relative inconvenience.

Adult↗
PubMed1988

Titanium-coated hollow screw and reconstruction plate system (THORP) in mandibular reconstruction.

Clinical results are presented which have been obtained from mandibular reconstruction with the Titanium-coated Hollow Screw and Reconstruction-Plate system (THORP) in 7 selected patients. In 3 of the patients primary bone grafting was performed with simultaneous implantation of titanium fixtures for dental reconstruction. The reconstruction-plates have shown excellent functional stability with no failures, such as loosening of screws, within an observation period up to 2 1/2 years. The system was submitted to immediate full functional loading despite the limited number of 2-3 fixation screws for each end of the plate. Among several technical advantages of the system are the possibility of lingual plate application and reconstruction with a three-dimensionally free, adjustable condylar prosthesis.

Adult↗
PubMed1993

Indications for the AO plate with a myocutaneous flap instead of revascularized tissue transfer for mandibular reconstruction.

Our preferred technique for mandibular reconstruction uses a revascularized osseomyocutaneous flap. However, to reconstruct small lateral defects in dentulous patients, the AO mandibular reconstruction plate (MRP) is used. Its advantages include quick, reliable placement without a donor site or the need for advanced technical training. This review examines 16 patients who underwent primary mandibular reconstruction after ablative oncologic surgery using an AO MRP without a bone graft. The average follow-up was 32 months. Twelve patients (75%) had successful reconstructions, while 4 (25%) developed serious complications resulting in failure of the MRP. The most significant factor limiting rehabilitation was disease progression, affecting 12 (75%) of the 16 patients. In this subgroup of selected patients with small (< 6 cm) lateral mandibular defects, useful dentition, and advanced disease, or whose general medical condition precludes prolonged general anesthesia, primary mandibular reconstruction using an AO MRP and a myocutaneous flap without a bone graft is a viable reconstructive alternative.

Adult↗
PubMed1996

Lateral mandibular reconstruction using soft-tissue free flaps and plates.

OBJECTIVE: To assess the outcome of patients who are undergoing reconstruction of segmental lateral mandibular defects by using soft-tissue free flaps combined with mandibular reconstruction plates. DESIGN: Retrospective case series of 15 patients who were undergoing primary reconstruction of mandibular segments posterior to the mental foramen, resulting from treatment of head and neck cancer. All patients received either preoperative or postoperative radiation therapy. SETTING: Academic tertiary care referral center. INTERVENTIONS: Fourteen patients had mandibular continuity restored by using the titanium hollow screw reconstruction plate system, and 1 patient received a stainless steel mandibular reconstruction plate. Associated soft-tissue defects were repaired by using radial forearm (n = 11), rectus abdominis (n = 2), scapular and parascapular (n = 1), or lateral arm (n = 1) free flaps. MAIN OUTCOME MEASURES: Early and delayed complications. RESULTS: All 15 microvascular free tissue transfers were successful. Early complications were minor and occurred in 5 (33%) of 15 patients. One patient in whom the titanium hollow screw reconstruction plate system had been used experienced a fracture at 15 months after reconstruction. Three patients experienced delayed external plate exposure between 7 and 15 months after primary oromandibular reconstruction. Patients who experienced delayed external plate exposure required secondary reconstruction with a vascularized bone-containing free flap. The overall rate of delayed reconstructive failure was 40% in patients who were followed up for a minimum of 1 year. CONCLUSIONS: For patients who are undergoing free flap reconstruction of lateral mandibulectomy defects, the technique that used soft-tissue free flaps combined with mandibular reconstruction plates has been abandoned in favor of using vascularized bone-containing free flaps or a combination of free flaps to achieve optimal long-term results.

Adult↗
PubMed1996

Enhanced bone graft contouring for mandibular reconstruction using intraoperatively fashioned templates.

Among the challenges created by reconstruction of mandibular defects using free vascularized bone flaps is sizing and contouring of the bone graft in accordance with the dimensions of the defect. We have developed a rapid and reliable method for constructing a postablative template of the defect using a rapid-setting splint material called Aquaplast. The template can then be used at a site remote from the head and neck as a precise model of the defect for optimal size and shape estimation during bone graft sculpting and fixation. The material also has postablative utility for estimation of internal lining requirements and soft-tissue replacements during osteomusculocutaneous or fasciocutaneous flap planning. We feel that the use of Aquaplast has greatly enhanced our three-dimensional appreciation of mandibular bone defects and enhanced the final aesthetic and functional results in our patients undergoing mandibular reconstruction.

Humans↗
PubMed1996

The importance of mandibular position in microvascular mandibular reconstruction.

The challenge of mandibular reconstruction rests in the difficulty of re-creating the intricate three-dimensional relationship of the oral cavity, thereby ensuring occlusal relationships, oral competence, and facial contour. Recent advances in microvascular surgery have made reliable transfer of autologous tissue possible, hut successful reconstruction depends on accurate insetting of the bone flap. The authors reviewed their five years of experience with mandibular reconstruction and found six patients with a poor reconstructive result secondary to improper insetting of the bone flap. Anteromedially rotated and free-floating proximal mandibular segments appeared to be the most significant contributor to incorrect placement of the bone flap. Based on their findings, the authors devised a simple technique for stabilizing proximal mandibular segments.

Aged↗
PubMed2007

Feasibility of preoperative planning using anatomical facsimile models for mandibular reconstruction.

BACKGROUND: Functional and aesthetic mandibular reconstruction after ablative tumor surgery continues to be a challenge even after the introduction of microvascular bone transfer. Complex microvascular reconstruction of the resection site requires accurate preoperative planning. In the recent past, bone graft and fixation plates had to be reshaped during the operation by trial and error, often a time-consuming procedure. This paper outlines the possibilities and advantages of the clinical application of anatomical facsimile models in the preoperative planning of complex mandibular reconstructions after tumor resections. METHODS: From 2003 to 2005, in the Department of Maxillofacial Surgery of the University of Udine, a protocol was applied with the preoperative realization of stereolithographic models for all the patients who underwent mandibular reconstruction with microvascular flaps. 24 stereolithographic models were realized prior to surgery before emimandibulectomy or segmental mandibulectomy. The titanium plates to be used for fixation were chosen and bent on the model preoperatively. The geometrical information of the virtual mandibular resections and of the stereolithographic models were used to choose the ideal flap and to contour the flap into an ideal neomandible when it was still pedicled before harvesting. RESULTS: Good functional and aesthetic results were achieved. The surgical time was decreased on average by about 1.5 hours compared to the same surgical kind of procedures performed, in the same institution by the same surgical team, without the aforesaid protocol of planning. CONCLUSION: Producing virtual and stereolithographic models, and using them for preoperative planning substantially reduces operative time and difficulty of the operation during microvascular reconstruction of the mandible.

Computer Simulation↗
PubMed1998

[Secondary oro-mandibular reconstruction using revascularized bone flaps].

BACKGROUND: Oro-mandibular reconstruction using vascularized bone-containing free-flaps can be accomplished with flap survival rates in the range of 95%. Primary reconstruction offers the best opportunity to achieve the optimal aesthetic and functional results. Patients presenting for secondary oro-mandibular reconstruction have a unique set of problems; these include the presence of soft tissue contracture displacing the mandibular segments in malposition and soft tissue deficiencies, that makes surgical correction more difficult and potentially more hazardous. Vascularized bone-containing free-flaps are indicated in secondary oro-mandibular reconstruction where both hard and soft tissues replacement is needed or when the recipient bed is unfavourable due to previous surgery and/or radiation. METHODS: Authors presents personal experience in ten cases of secondary oro-mandibular reconstruction treated at Maxillofacial Department of Parma from September 1995 to September 1996 with secondary oro-mandibular reconstruction using bone containing free flaps. Two different donor sites were used to harvest bone-containing free flaps: iliac crest in 2 cases and fibula in the others. In 4 cases the flap was only osseous while in the other 6 cases it was osteocutaneous. RESULTS: All flaps were transplanted successfully; in 1 case necrosis of the skin component of the flap was observed. CONCLUSIONS: The introduction of vascularized bone containing free flaps transferred from distant sites by microvascular techniques has changed mandibular reconstruction. Vascularized bone transferred into tissue beds compromised by salivary contamination and previous irradiation and the rational use of the soft tissutal components of the flap permit also the restoration of articulation, deglutition and mastication with quality of life better than non-vascularized alternatives.

Adult↗
PubMed2000

The team concept in mandibular reconstruction after ablative oncologic surgery.

PURPOSE: This study evaluated the efficiency and cost-effectiveness of using a reconstructive team for mandibular reconstruction. METHODS: An outcome-based retrospective review of 64 patients who had undergone microvascular fibular reconstruction of the mandible was performed. Operating room time, use of blood products, intraoperative fluid replacement, and hospital and intensive care unit stay were evaluated. Patients were divided into 2 groups on a chronologic basis. Group 1 was the first 34 consecutive patients and group 2 was the next 30 consecutive patients. RESULTS: Group 2 had a significantly shorter operating room time (P < .0001), hospital stay (P = .012), and used significantly less blood (P = .002) and colloid (P = .044) than group 1, resulting in significant cost savings, ($5,061.47/patient). Analysis showed no differences between groups demographically or for wound complications. CONCLUSIONS: Experience and the development of a team concept significantly decreased the cost for mandibular reconstruction with free fibula flaps without increasing wound complications.

Anesthesiology↗
PubMed1998

Rigid fixation in mandibular reconstruction.

A primary goal of mandibular reconstruction is to preserve form and function. Free vascularized bone remains the gold standard for mandibular reconstruction of the anterior defect. While lateral mandibular defects need for vascularized bone remain controversial, free bone flaps provide the most reliable bone stock readily available for dental implantation. Mandibular alignment remains critical for recreating the 3-dimensional relationships of mandibular projection, occlusion, and condylar placement. Depending on the defect, a variety of techniques can be used to maintain mandibular alignment. These include prefabrication of the plate, placement of an internal fixation device, and intermaxillary fixation. Fixation techniques in this day and age generally rely on plates and screws. Miniplates are popular among some reconstructive surgeons while others prefer larger reconstruction plates that can span the entire defect. Bony contouring is critical since keeping bone surfaces in contact allows for improved bone healing. Condylar reconstruction this critical, when the ramus and condylar head are resected, require reconstruction to maintain the entire solid arch. A variety of these techniques are discussed. While the challenge remains reconstituting a solid arch, a variety of techniques can be employed. These techniques including fixation technique, bony contour, mandibular alignment, and condylar reconstruction will be discussed.

Bone Plates↗
PubMed1996

Fixed mandibular implant after microvascular mandibular reconstruction.

OBJECTIVE: To evaluate the use of fixed mandibular implants to retain dental prostheses after microvascular mandibular reconstruction. DESIGN: Case series. SETTING: Tertiary referral center. PATIENTS: Eight patients with microvascular mandibular reconstruction after mandibular resection. OUTCOME MEASURES: Clinically noted functional results, serial radiographic evidence of fixed mandibular implant and mandibular integrity, and complications encountered. RESULTS: Eight of 8 fixed mandibular implants were successfully placed and remained stable. The follow-up period ranged from 10 to 21 months (mean, 14.3 months). CONCLUSION: The use of fixed mandibular implants to retain dental prostheses after microvascular mandibular reconstruction is a safe and effective treatment option.

Aged↗
PubMed1998

Lag-screw technique in free osseous mandibular reconstruction.

The surgical registry was reviewed for mandibular reconstruction from 1988 to 1992. During this time, 51 patients underwent mandibular reconstruction. Of this group, 17 patients had their microvascular bone grafts secured with lag-screw fixation. An AO technique, utilizing 2.7-mm cortical screws, was used to provide rigid fixation. Mandibular defects ranged from 6 to 20 cm. AO vascularized bone grafts were studied with bone scans and remained viable. Follow-up revealed no flap losses or oral cutaneous fistulae. Lag-screw fixation, in conjunction with mandibular reconstruction, results in rigid fixation, obviates the need for mandibulamaxillary fixation, has the advantage of ease of application, and is safe to use.

Adult↗
PubMed2004

Mandibular reconstruction in 2004: an analysis of different techniques.

PURPOSE OF REVIEW: The field of mandibular reconstruction has evolved dramatically over the past fifty years. Numerous advances in microsurgical technique, plating technology and instrumentation, and an understanding of donor site angiosomes have made consistent and reliable mandibular reconstruction possible. Refinements in technique continue to improve the functional and aesthetic outcomes of oromandibular reconstruction. This review discusses the current state-of-the-art techniques for mandibular reconstruction and highlights the latest innovations in technique. RECENT FINDINGS: The most common indication for oromandibular reconstruction remains ablative surgery for advanced neoplastic processes of the oral cavity and oropharynx. Reconstruction of these complex three-dimensional composite bony and soft-tissue defects is paramount for rehabilitation of form and function. Vascularized osseous free tissue transfer is the state-of-the-art for mandibular reconstruction. The long-term excellent functional and aesthetic outcomes of this technique have recently been reported. The most commonly used free flaps for mandibular reconstruction are the fibula, iliac crest, and scapula. Each of these typically accepts endosseous implants improving functional outcomes. The use of mandibular reconstruction plates and coverage with a soft-tissue flap remains a reconstructive option for selected patients. The latest refinements in technique include temporary intraoperative external fixation, the use of periosteal free flaps, distraction osteogenesis, and development of biodegradable biopolymer scaffolds for mandibular defects. SUMMARY: Oromandibular reconstruction, although a challenge for the head and neck reconstructive surgeon, is now reliable and highly successful with excellent long-term functional and aesthetic outcomes.

Bone Transplantation↗
PubMed2006

Efficacy of small reconstruction plates in vascularized bone graft mandibular reconstruction.

BACKGROUND: Utilization of vascularized bone grafts rigidly fixated with titanium reconstruction plates is the method of choice for reconstruction of segmental mandibular defects. We hypothesized that the use of the newer 2.0-mm locking reconstruction plate (LRP) is not associated with higher rates of complications when compared with larger, previously used plating systems. METHODS: A retrospective case series of 184 patients undergoing 185 vascularized bone graft reconstruction procedures of the mandible was conducted. RESULTS: There were 37 plate complications. There was no significant difference in complication rates for the 2 most used plate types (14.5% with the 2.0-mm LRP and 22.2% with the 2.4-mm LRP). CONCLUSIONS: Use of the smaller 2.0-mm LRP was not associated with an increase in the complications of plate fracture, exposure, infection, or nonunion. Because of its lower profile and ease of application, the 2.0-mm LRP is our plate of choice for mandibular reconstruction.

Adult↗