SEARCH · PubMed Health

Results for “surface modification”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 595 records · Page 33Linked to original sources

PubMed1979

Immobilization of neuraminidase and its potential application in the modification of cell surfaces.

Vibrio cholerae neuraminidase was immobilized on the inside of 1.0 mm inner diameter nylon tubing with retention of enzyme activity, when assayed at 37 degrees C and pH 5.5 with mucin as substrate. The stabilities of the immobilized and soluble enzymes were similar for up to 3 hr at 37 degrees C. Preliminary data indicated that immobilized neuraminidase will release sialic acid from the surface of leukemic AKR mouse thymus and spleen lymphocytes; however, the level of immobilized enzyme activity needs to be increased for practical applications. With this improvement immobilized neuraminidase could become a novel preparation for carrying out cell surface modifications with minimal enzyme contamination of the cell.

Animals↗

PubMedDate not supplied

Vacuum-ultraviolet photochemically initiated modification of polystyrene surfaces: chemical changes.

Fourier-Transform infrared (FTIR) spectroscopy and surface energy analysis (contact angle measurements) have been performed as a means of identification and quantification of the functionalization of polystyrene surfaces upon vacuum ultraviolet- (VUV-) photochemically initiated oxidation. Photochemical oxidation was performed in the presence of water vapor and molecular oxygen using a pulsed Xe2-excimer radiation source (lambda(exc): 172 nm). Surface oxidation was studied as a function of two parameters: irradiation time and distance between sample and radiation source. During the first 1-2 min of irradiation, an increase of the concentrations of hydroxyl (OH) and carbonyl (C=O) groups on the surface was observed, both reaching limiting values. As expected, the rate of oxidation diminished exponentially with increasing distance between the radiation source and the surface of the polystyrene film. Changes in the surface energy due to the introduction of these polar (i.e. OH and C=O) groups were also determined. The densities of the functional groups decreased upon washing with acetonitrile, and analysis of the washing solution by means of gas chromatography-mass spectrometry (GC-MS) revealed the presence of a large number of products. The application of pulsed Xe2-excimer radiation sources as a valuable alternative to conventional means (i.e. laser and plasma) for the photochemical oxidation and surface modification of polystyrene is discussed.

Journal Article↗

PubMed2000

Electrochemically induced annealing of stainless-steel surfaces.

Modification of the surface properties of metals without affecting their bulk properties is of technological interest in demanding applications where surface stability and hardness are important. When austenitic stainless steel is heavily plastically deformed by grinding or rolling, a martensitic phase transformation occurs that causes significant changes in the bulk and surface mechanical properties of the alloy. This martensitic phase can also be generated in stainless-steel surfaces by cathodic charging, as a consequence of lattice strain generated by absorbed hydrogen. Heat treatment of the steel to temperatures of several hundred degrees can result in loss of the martensitic structure, but this alters the bulk properties of the alloy. Here we show that martensitic structures in stainless steel can be removed by appropriate electrochemical treatment in aqueous solutions at much lower temperature than conventional annealing treatments. This electrochemically induced annealing process allows the hardness of cold-worked stainless steels to be maintained, while eliminating the brittle martensitic phase from the surface. Using this approach, we are able to anneal the surface and near-surface regions of specimens that contain rolling-induced martensite throughout their bulk, as well as those containing surface martensite induced by grinding. Although the origin of the electrochemical annealing process still needs further clarification, we expect that this treatment will lead to further development in enhancing the surface properties of metals.

Journal Article↗

PubMed1975

Modification of surface membrane antigens by trypsin.

Cultured 3T3 and PY-3T3 mouse fibroblasts were subjected to mild treatment with twice crystallized trypsin and their immunogenicity tested in ICR/CD-1 mice. Surface antigenic modifications were observed using the foot pad swelling assay for detection of delayed hypersensitive responses. Mice immunized with trypsin-treated 3T3 cells showed cell-mediated immune reactions following challenge with either homologous antigen or untreated PY-3T3 fibroblasts. In contrast, treatment of the virus-transformed cells with trypsin decreased their antigenicity as determined by this in vivo assay.

Animals↗

PubMed2003

Lead nitrate and gadolinium chloride administration modify hepatocyte cell surfaces.

Modifications of hepatocyte cell surface were determined after single i.v. injection to rats of Pb(NO(3))(2) (known to induce liver hyperplasia followed by apoptosis) or GdCl(3) (known to induce proliferation of parenchymal cells and Kupffer cell depletion) or administration of GdCl(3) 24 h before Pb(NO(3))(2) injection (known to reduce hyperplasia and apoptosis induced in the parenchymal liver cells by the single Pb(NO(3))(2) injection). Rats were sacrificed at fixed times after the treatments (1, 3 and 5 days) and hepatocytes were isolated by enzymatic liver perfusion. In spite of the intracellular target of the heavy metals, signals leading to liver hyperplasia and apoptosis (with rates different for the different experimental conditions) were generated, which in turn were responsible for cell surface alteration. Increment or decrement of phosphatidylserine (PS) expression, asialoglycoprotein receptors (ASGPRs) and sugar residue expression on hepatocyte surfaces was measured in parallel with apoptosis and proliferation. When GdCl(3) was injected 24 h before Pb(NO(3))(2) injection, liver modifications were significantly reduced, thus suggesting that GdCl(3) could prevent and/or reduce liver damage.

Animals↗

PubMed2006

Modification of surface properties of a poly(dimethylsiloxane)-based elastomer, RTV11, upon exposure to seawater.

Atomic force microscopy (AFM) was combined with surface analytical techniques to investigate the rarely addressed issue of the effect of seawater on the surface properties of a selected fouling-release coating, silicon elastomer RTV11 (trademark of General Electric). The exposure of the RTV11 surface to seawater resulted in a modification of its morphology and mechanical properties, as confirmed by AFM and scanning electron microscopy (SEM). Surface modification was dependent on sample preparation and curing process, namely, curing agent concentration and relative humidity during curing. The RTV11 surface remained largely unaltered for samples cured under 100% relative humidity. SEM and X-ray photoelectron spectroscopy studies confirmed that the modified surface of RTV11 had the same elemental composition as the unexposed surface of the elastomer and showed excess Ca. However, the modified surface deformed plastically under load and was stiffer than the original surface. No major change was found on surfaces exposed to nanopure water during similar times of exposure as in seawater, regardless of curing conditions. The rate of increase in the aggregate formation in seawater can be described by an exponential function, with a decay constant of approximately 4.99 x 10(-)(3) min(-)(1) and a pre-exponential factor of approximately 1.77 x 10(-)(2) microm/min.

Atmosphere↗

PubMed2004

Effect of coal mine dust and clay extracts on the biological activity of the quartz surface.

Modification of the quartz surface by aluminium salts and metallic iron have been shown to reduce the biological activity of quartz. This study aimed to investigate the ability of water soluble extracts of coal mine dust (CMD), low aluminium clays (hectorite and montmorillonite) and high aluminium clays (attapulgite and kaolin) to inhibit the reactivity of the quartz surface. DQ12 induced significant haemolysis of sheep erythrocytes in vitro and inflammation in vivo as indicated by increases in the total cell numbers, neutrophil cell numbers, MIP-2 protein and albumin content of bronchoalveolar lavage (BAL) fluid. Treatment of DQ12 with CMD extract prevented both haemolysis and inflammation. Extracts of the high aluminium clays (kaolin and attapulgite) prevented inhibition of DQ12 induced haemolysis, and the kaolin extract inhibited quartz driven inflammation. DQ12 induced haemolysis by coal mine dust and kaolin extract could be prevented by pre-treatment of the extracts with a cation chellator. Extracts of the low aluminium clays (montmorillonite and hectorite) did not prevent DQ12 induced haemolysis, although the hectorite extract did prevent inflammation. These results suggest that CMD, and clays both low and rich in aluminium, all contain soluble components (possibly cations) capable of masking the reactivity of the quartz surface.

Administration, Inhalation↗

PubMed1997

Modification of the erythrocyte surface in rats bearing Yoshida ascites sarcoma is brought about by a tumour variant of alpha2-macroglobulin.

Erythrocytes from the circulation of rats bearing Yoshida ascites sarcoma exhibit higher concanavalin A (ConA)-mediated agglutinability than those from normal animals. A tetrameric glycoprotein of subunit molecular mass 170 kDa, purified from the cell-free ascites fluid, was found to confer higher ConA-mediated agglutinability on erythrocytes in vitro. An antiserum to this tumour-derived protein failed to detect any cross-reactive component in normal rat plasma or in any of the normal tissues examined. An immunoreactive protein was, however, detected in blood plasma when the acute-phase reaction was stimulated by injection of turpentine. The cross-reactive acute-phase protein was purified by ConA-affinity, gel-filtration and ion-exchange chromatography, and identified as alpha2-macroglobulin. The acute-phase protein and the protein obtained from the ascites fluid have identical or very similar native and subunit molecular masses, subunit arrangement and pI. They both are able to inhibit trypsin and, as a consequence, acquire greater mobility in native PAGE. In addition, the two proteins bind to rat erythrocytes non-specifically, and in similar amounts. However, despite these similarities, the acute-phase protein is unable to enhance the agglutinability of erythrocytes. The two proteins differ in their carbohydrate content, but this differential glycosylation is not the cause of the difference in their surface modification activity. The chemically deglycosylated proteins show a small but consistent difference in the size of their polypeptides. Their tryptic peptide maps, although largely similar, show some differences, as do their amino acid compositions. It is probable that the proteins are independent members of the same (alpha-macroglobulin) family. The rat embryo is also found to express a soluble protein consisting of a 170 kDa polypeptide that cross-reacts with the antibody to the tumour-derived protein. The purified embryo protein is able to alter the ConA-mediated agglutinability of erythrocytes in vitro, and also yields a tryptic peptide map that is identical to that of the tumour-derived protein. The modification of the host cell surface in the tumour-bearing rats is thus caused by what appears to be a tumour (oncofetal?) variant of alpha2-macroglobulin.

Agglutination↗

PubMed2000

Chemical changes of polymeric surfaces after modification with multi-source cluster deposition.

A new process for surface modification of polymers with multi-source cluster deposition apparatus has been reported in our previous work. The apparatus simultaneously supplies reactant of ammonium sulfamate and activator of energetic Ar(+) ion. In this work chemical changes are analyzed on the basis of XPS spectra and the relations of contact angle and platelet adhesion with chemical changes are discussed. Polymer film, setting on a turning holder, was irradiated by Ar(+) ions during bombardment with ammonium sulfamate clusters. The Ar(+) ion source served for activation of polymer surface and a cluster ion source supplied ammonium sulfamate molecules to react with activated surface. After thorough washing with deionized sterile water, the modified surfaces were evaluated in terms of contact angle of water, elemental composition and binding state on XPS and platelet adhesion with platelet rich plasma (PRP). The modification of polysulfone decreased the contact angle of water on surfaces from 82.6 down to 34.5 degrees. The adhesion number of platelets were decreased to one-tenth of the original surface. Ammonium, amine, sulfate and thiophene combinations were formed on the modified surfaces. The primary studies showed successful modification of polysulfone with ammonium sulfamate by assistance of Ar(+) ion irradiation. The polar groups like N-sulfate were formed on surfaces and contribute to the decrease of surface contact angle and adhesion number of platelets. Since the same process can also be applied to other polymeric materials with various substrates, combining with the features of no solvent and no topographic changes, this method might be developed in a promising way for modification of polymers.

Journal Article↗

PubMed2000

Photoluminescence Properties of Surface-Modified Nanocrystalline ZnS : Mn.

DBS surface-modified nanocrystalline ZnS : Mn was prepared by a precipitation method. Photoluminescence spectra and decay curves were measured and compared to those of unmodified samples. For both kinds of samples, luminescence decay curves of 600 nm emission consist of two components with nanosecond (ns) and millisecond (ms) lifetimes. The nanosecond component is attributed to zinc vacancies luminescence, with peak located at 440 nm. While the millisecond component is attributed to Mn(2+) luminescence and its decay time changes with Mn(2+) concentration and surface modification. The surface-modified sample has a longer lifetime compared to unmodified samples. The photoaging of surface-modified samples is slow. Particle size effects on photoaging were also examined. For nanocrystalline ZnS : Mn photoaging is more noticeable than that of bulk material. After UV irradiation, photoluminescence intensity of the modified sample is several times larger than that of the unmodified sample, because the surface-active reagent decreases surface defects and depresses radiationless transitions. XPS yields direct evidence of the surface-modification effect on the surface structure. Copyright 2000 Academic Press.

Journal Article↗

PubMed2007

Uptake characteristics of liposomes by rat alveolar macrophages: influence of particle size and surface mannose modification.

The influence of particle size and surface mannose modification on the uptake of liposomes by alveolar macrophages (AMs) was investigated in-vitro and in-vivo. Non-modified liposomes of five different particle sizes (100, 200, 400, 1000 and 2000 nm) and mannosylated liposomes with 4-aminophenyl-alpha-D-mannopyranoside (particle size 1000 nm) were prepared, and the uptake characteristics by rat AMs in-vitro and in-vivo were examined. The uptake of non-modified liposomes by rat AMs in-vitro increased with an increase in particle size over the range of 100-1000 nm, and became constant at over 1000 nm. The uptake of non-modified liposomes by AMs after pulmonary administration to rats in-vivo increased with an increase in particle size in the range 100-2000 nm. The uptake of mannosylated liposomes (particle size 1000 nm) by rat AMs both in-vitro and in-vivo was significantly greater than that of non-modified liposomes (particle size 1000 nm). The results indicate that the uptake of liposomes by rat AMs is dependent on particle size and is increased by surface mannose modification.

Administration, Intranasal↗

PubMedDate not supplied

[Comparative study of horseradish peroxidase immobilization on modification of a gold surface using a surface plasmon resonance method].

Horseradish peroxidase is immobilized by a periodate method on the gold surfaces previously modified with 16-mercapto-hexadecanoic acid or with hydrogen disulfide and soybean trypsin inhibitor. The effect of gold surface modification conditions on the immobilization of the enzyme as well as on the properties of the immobilized glycoprotein are studied using surface plasmon resonance technique. Restoration of the ability to bind specific antibodies is demonstrated for the immobilized enzyme. The low level of non-specific antibody binding to the immobilized glycoprotein is also shown.

Antibodies↗

PubMed2000

Covalent surface chemical modification of electrodes for cardiac pacing applications.

We report the covalent surface modification of active-fixation pacemaker electrodes with butanethiol or dodecanethiol self-assembled monolayers (SAMs) using a platinum or gold metal-thiolate bond (i.e., changing the chemical identity of the exposed metal electrode from metal to organic) in such fashion that (a) the surface is organic in functionality with lipophilic physicochemical characteristics, (b) a possible degradation product is gold (I)-alkanethiolate with putative anti-inflammatory actions, and (c) current density/electric field strength is increased. Superior acute and chronic pacing performance with dodecanethiol-modified, gold-coated, platinum-iridium alloy pacemaker electrodes was observed with inferential evidence of reduced inflammation and scar. This approach may have applicability in other areas of bioelectrodes with practical applications in clinical cardiology, surgery, neuroscience, and subcutaneous sensors.

Animals↗

PubMed2005

Redispersible rutile TiO2 nanocrystals in organic media by surface chemical modification with an inorganic barium hydroxide.

The present paper describes the synthesis of the redispersible rutile TiO2 nanocrystals in organic media by surface chemical modification reaction in an aqueous barium hydroxide solution. In our facile surface modification reactions, the surfaces of the TiO2 nanocrystals are coated by bimetallic TiOBa spices and saturated with BaOH terminal groups. The inherent characteristics such as morphology, size, crystallinity, and color of the nanocrystals remained almost unchanged after surface-treatment, but their dispersibility in organic media such as methanol and DMF were remarkably enhanced. It is ascribed that BaOH groups in the surface of the TiO2 nanocrystals prevented the formation of covalently bound agglomerates through Ti-O-Ti condensation reaction among the nanocrystals during the purification and water-elimination procedures.

Journal Article↗

PubMed2001

Plaque formation on surface modified dental implants. An in vitro study.

Bacterial adhesion on titanium implant surfaces has a strong influence on healing and long-term outcome of dental implants. Parameters like surface roughness and chemical composition of the implant surface were found to have a significant impact on plaque formation. The purpose of this study was to evaluate the influence of two physical hard coatings on bacterial adhesion in comparison with control surfaces of equivalent roughness. Two members of the oral microflora, Streptococcus mutans and Streptococcus sanguis were used. Commercially pure titanium discs were modified using four different surface treatments: physical vapour deposition (PVD) with either titanium nitride (TiN) or zirconium nitride (ZrN), thermal oxidation and structuring with laser radiation. Polished titanium surfaces were used as controls. Surface topography was examined by SEM and estimation of surface roughness was done using a contact stylus profilometer. Contact angle measurements were carried out to calculate surface energy. Titanium discs were incubated in the respective bacterial cell suspension for one hour and single colonies formed by adhering bacteria were counted by fluorescence microscopy. Contact angle measurements showed no significant differences between the surface modifications. The surface roughness (Ra) of all surfaces examined was between 0.14 and 1.00 microm. A significant reduction of the number of adherent bacteria was observed on inherently stable titanium hard materials such as TiN and ZrN and thermically oxidated titanium surfaces compared to polished titanium. In conclusion, physical modification of titanium implant surfaces such as coating with TiN or ZrN may reduce bacterial adherence and hence improve clinical results.

Bacterial Adhesion↗

PubMed2005

Interpretation of protein adsorption: surface-induced conformational changes.

Protein adhesion plays a major role in determining the biocompatibility of materials. The first stage of implant integration is the adhesion of protein followed by cell attachment. Surface modification of implants (surface chemistry and topography) to induce and control protein and cell adhesion is currently of great interest. This communication presents data on protein adsorption (bovine serum albumin and fibrinogen) onto model hydrophobic (CH(3)) and hydrophilic (OH) surfaces, investigated using a quartz crystal microbalance (QCM) and grazing angle infrared spectroscopy. Our data suggest that albumin undergoes adsorption via a single step whereas fibrinogen adsorption is a more complex, multistage process. Albumin has a stronger affinity toward the CH(3) compared to OH terminated surface. In contrast, fibrinogen adheres more rapidly to both surfaces, having a slightly higher affinity toward the hydrophobic surface. Conformational assessment of the adsorbed proteins by grazing angle infrared spectroscopy (GA-FTIR) shows that after an initial 1 h incubation few further time-dependent changes are observed. Both proteins exhibited a less organized secondary structure upon adsorption onto a hydrophobic surface than onto a hydrophilic surface, with the effect observed greatest for albumin. This study demonstrates the ability of simple tailor-made monochemical surfaces to influence binding rates and conformation of bound proteins through protein-surface interactions. Current interest in biocompatible materials has focused on surface modifications to induce rapid healing, both of implants and for wound care products. This effect may also be of significance at the next stage of implant integration, as cell adhesion occurs through the surface protein layer.

Adsorption↗

PubMed2005

[Surface biochemical modification for the titanium implants].

This paper reviews the progress in biochemical design and modification for the surfaces of titanium implants in recent years, the emphasis being laid on the introduction of the surface molecular construction, self-assembly technique and its application in biomedical materials.

Biocompatible Materials↗

PubMed2000

Surface plasmon resonance kinetic studies of the HIV TAR RNA kissing hairpin complex and its stabilization by 2-thiouridine modification.

Surface plasmon resonance (BIACORE) was used to determine the kinetic values for formation of the HIV TAR-TAR* ('kissing hairpin') RNA complex. The TAR component was also synthesized with the modified nucleoside 2-thiouridine at position 7 in the loop and the kinetics and equilibrium dissociation constants compared with the unmodified TAR hairpin. The BIACORE data show an equilibrium dissociation constant of 1.58 nM for the complex containing the s(2)U modified TAR hairpin, which is 8-fold lower than for the parent hairpin (12.5 nM). This is a result of a 2-fold faster k(a) (4.14x10(5) M(-1) s(-1) versus 2.1x10(5) M(-1) s(-1)) and a 4-fold slower k(d) (6.55x10(-4) s(-1) versus 2.63x10(-3) s(-1)). (1)H NMR imino spectra show that the secondary structure interactions involved in complex formation are retained in the s(2)U-modified complex. Magnesium has been reported to significantly stabilize the TAR-TAR* complex and we found that Mn(2+) and Ca(2+) are also strongly stabilizing, while Mg(2+) exhibited the greatest effect on the complex kinetics. The stabilizing effects of 2-thiouridine indicate that this base modification may be generally useful as an antisense RNA modification for oligonucleotide therapeutics which target RNA loops.

Calcium↗