SEARCH · PubMed Health

Results for “Tissue Engineering”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47Linked to original sources

PubMed2004

[Preliminary study on research method of cell survival rate at procedure of cryopreservation of tissue engineered tendons].

OBJECTIVE: To study the research method of cell survival rate at the procedure of cryopreservation of tissue engineered tendons. METHODS: In the 4th generation of human fibroblasts, the dead cells were stained with propidium iodine (PI), while the living cells with Hoechst 33342 (Ho). The living cells and dead cells emitted fluorescence of red and blue respectively after they were stimulated by suitable ultra-violet, then flow cytometry was applied to distinguish them. The seeding cells were collected to make them to be the cell suspension of suitable concentration (6.0 x 10(5) cell/ml) before they were divided into two parts. We cryopreserved and defrosted one part three times to kill the cells and did not cryopreserve the other part, then we made cell suspension at different ratios of cryopreserved cell to non-cryopreserved cells. The fluorescence staining and flow cytometry were used to study the correlation between cell ratios of cryopreserved cell to non-cryopreserved cell and the cell survival rates. We compared the cell survival rates between immediate flow cytometry and that 2 hours after fluorescence staining. RESULTS: The results of flow cytometry showed that correlation between the ratio of cryopreservation and the cell survival rate was significant (r = 0.970, P < 0.05), image analysis study also showed the correlation was significant (r = 0.982, P < 0.05). The cell survival rate decreased by use of flow cytometry two hours after fluorescence staining, but there was no significant difference when compared with that of immediate flow cytometry (P > 0.05). We could also observe the cells on the tissue engineered tendons by fluorescence image directly. CONCLUSION: Flow cytometry and fluorescence image after PI and Ho staining is a good way in study cell survival rate at the procedure of cryopreservation of tissue engineered tendons.

Cell Count↗

PubMed2002

Surface studies of coated polymer microspheres and protein release from tissue-engineered scaffolds.

The controlled release of growth factors from porous, polymer scaffolds is being studied for potential use as tissue-engineered scaffolds. Biodegradable polymer microspheres were coated with a biocompatible polymer membrane to permit the incorporation of the microspheres into tissue-engineered scaffolds. Surface studies with poly(D,L-lactic-co-glycolic acid) [PLGA], and poly(vinyl alcohol) [PVA] were conducted. Polymer films were dip-coated onto glass slides and water contact angles were measured. The contact angles revealed an initially hydrophobic PLGA film, which became hydrophilic after PVA coating. After immersion in water, the PVA coating was removed and a hydrophobic PLGA film remained. Following optimization using these 2D contact angle studies, biodegradable PLGA microspheres were prepared, characterized, and coated with PVA. X-ray photoelectron spectroscopy was used to further characterize coated slides and microspheres. The release of the model protein bovine serum albumin from PVA-coated PLGA microspheres was studied over 8 days. The release of BSA from PVA-coated PLGA microspheres embedded in porous PLGA scaffolds over 24 days was also examined. Coating of the PLGA microspheres with PVA permitted their incorporation into tissue-engineered scaffolds and resulted in a controlled release of BSA.

Coated Materials, Biocompatible↗

PubMed2005

[Percutaneous penetration of ketoprofen and ketoprofen isopropyl ester through a tissue engineering skin reconstructed with HaCaT cells].

AIM: To reconstruct of a tissue engineering skin in vitro for the study of the use of drug percutaneous penetration and metabolism. METHODS: Dermal fibroblasts were embedded in collagen type I. HaCaT cells were seeded on the top of the gel. The skin was generated through air-liquid interface culture. Effects of various culture media on tissues morphology were investigated. Sections of the cultured skin were stained with hematoxylin and eosin and examined under microscope. Permeation and metabolism of ketoprofen and its isopropyl ester through the cultured skin were investigated. RESULTS: HaCaT cells initially developed a multilayer epithelium at the air-liquid interface, but it showed a parakeratotic stratum corneum. Vitamin C enhanced cell proliferation obviously. Vitamin D3 promoted cell differentiation. And estradiol showed little effect on the tissue engineering skin. Ketoprofen isopropyl ester was hydrolyzed into ketoprofen when penetrated through the cultured skin, which resembled in the skin cell homogenates metabolism. CONCLUSION: Cultured at the air-liquid interface, HaCaT cells developed a parakeratotic mutilayer epithelium. Enzyme activity was reserved. This cultured skin could serve as an appropriate model for drug percutaneous metabolism and skin irritation.

Administration, Cutaneous↗

PubMed2005

[Tooth tissue engineering: from cells to organ, an odyssey far from finished].

Tooth tissue engineering is an emerging biotechnique that will provide replacemental teeth for patients suffering from different diseases causing tooth loss. Although some attempts have been tried to generate whole tooth both in vivo and in vitro, the lack of the knowledge for tooth initiation and development, as well as for tooth shape controlling mechanisms greatly impede the progress of this technique. This article reviewed and discussed some recent findings in tooth tissue engineering related to the cell resource, the concept of reconstruction and regeneration, the application of artificial scaffolds, together with the methods of organ culture and implantation.

Humans↗

PubMed2006

The use of poly(l-lactide) and RGD modified microspheres as cell carriers in a flow intermittency bioreactor for tissue engineering cartilage.

The use of biodegradable microcarriers as initial supports for tissue engineering has been demonstrated to be advantageous for maintaining a differentiated cell phenotype; the high surface area also allows rapid cell expansion. Poly l-lactide (PLLA) is a significant member of a group of polymers regarded as bioresorbable and has been widely used for manufacturing 3D scaffolds for tissue engineering. In this study, the hypothesis that PLLA microspheres could be surface modified using RGD peptide sequences to improve the cell adhesion and function of those cells in contact with PLLA was tested. Using this type of approach it may be possible to generate larger structures that contain a high cell number relative to the amount of polymer, whilst remaining free from mass transport limitations. PLLA microspheres were prepared using an oil-in-water solvent-evaporation technique and then an RGD-motif was incorporated onto the microspheres surface by conjugation to improve cell attachment and function. Both PLLA and GRGDSPK modified PLLA microspheres were used as cell microcarriers for chondrocytes cultured in a flow intermittency bioreactor. At the same time, the degradation of the microspheres has been studied after 7, 14, 21, 28, 35, 49 and 56 days. The molecular weight of the PLLA microspheres was determined by Gel Permeation Chromatography. The morphology was assessed by scanning electron microscopy, and the thermal properties determined by Differential Scanning Calorimetry. It was demonstrated that the RGD modified and pure PLLA microspheres degraded gradually at a steady rate over the experimental period, which would provide a controlled degradation profile, both could serve as cell microcarriers because of their thermal and mechanical stabilities. The microspheres with RGD surface modification enhanced cell adhesion and increased the cell numbers in the microspheres aggregates.

Bioreactors↗

PubMed2025

Localisation-Dependent Variations in Articular Cartilage ECM: Implications for Tissue Engineering and Cartilage Repair.

Articular cartilage (AC) is a specialised connective tissue covering joint surfaces. It enables smooth movement, distributes mechanical loads, and protects the underlying bone. In response to loading, AC adapts by modifying both its thickness and composition. AC is organised in different zones, with low cellularity and a high abundance of extracellular matrix (ECM). Mechanical overloading or immobilisation can lead to structural changes, potentially resulting in osteoarthritis (OA), for which no causal treatment currently exists. However, smaller defects can be treated using chondrocyte/cartilage transplantation or tissue engineering. A better understanding of the molecular composition of AC at different locations is essential to improve such therapeutic approaches. For this purpose, we performed a comprehensive analysis of porcine femoral knee cartilage at eight defined anatomical sites. Cartilage thickness and proteoglycan (PG) content were analysed histologically, while specific ECM proteins were assessed by proteomics and validated by immunohistochemistry and Western blot. Significant differences were identified, particularly between medial and lateral compartments, in terms of cartilage thickness, PG abundance, and ECM composition. Some proteins also showed zone-specific localisation patterns. These structural differences likely reflect adaptation to mechanical loading and should be considered to optimise future cartilage repair and tissue engineering strategies.

Extracellular Matrix↗

PubMed2004

The local matrix distribution and the functional development of tissue engineered cartilage, a finite element study.

Assessment of the functionality of tissue engineered cartilage constructs is hampered by the lack of correlation between global measurements of extra cellular matrix constituents and the global mechanical properties. Based on patterns of matrix deposition around individual cells, it has been hypothesized previously, that mechanical functionality arises when contact occurs between zones of matrix associated with individual cells. The objective of this study is to determine whether the local distribution of newly synthesized extracellular matrix components contributes to the evolution of the mechanical properties of tissue engineered cartilage constructs. A computational homogenization approach was adopted, based on the concept of a periodic representative volume element. Local transport and immobilization of newly synthesized matrix components were described. Mechanical properties were taken dependent on the local matrix concentration and subsequently the global aggregate modulus and hydraulic permeability were derived. The transport parameters were varied to assess the effect of the evolving matrix distribution during culture. The results indicate that the overall stiffness and permeability are to a large extent insensitive to differences in local matrix distribution. This emphasizes the need for caution in the visual interpretation of tissue functionality from histology and underlines the importance of complementary measurements of the matrix's intrinsic molecular organization.

Biomechanical Phenomena↗

PubMed2006

[Progress of silk fibroin in the cell scaffold of tissue engineering].

Recent researches about the application of silk fibroin in cell culture suggested that silk fibroin displayed high rate of cell attachment and growth in vitro culture of most kinds of cells, equivalent to collagen. So silk fibroin can be used for cell scaffold material of tissue engineering, and can be applied to several fields such as tissue engineering of skin, cartilage and blood vessel. The related researches and the prospect of the application of silk fibroin in cell scaffold of tissue engineering are reviewed in this paper.

Animals↗

PubMed2005

Plasmid delivery in vivo from porous tissue-engineering scaffolds: transgene expression and cellular transfection.

Tissue engineering scaffolds capable of sustained plasmid release can promote gene transfer locally and stimulate new tissue formation. We have investigated the scaffold design parameters that influence the extent and duration of transgene expression and have characterized the distribution of transfected cells. Porous scaffolds with encapsulated plasmid were fabricated from poly(lactide-co-glycolide) with a gas foaming procedure, with wet granulation employed to mix the components homogeneously prior to foaming. Wet granulation enhanced plasmid incorporation relative to standard procedures and also enhanced in vivo transgene expression, possibly through the increased loading and maintenance of the scaffold pore structure. The plasmid loading regulated the quantity and duration of transgene expression, with expression for 105 days achieved at the highest dosage. Expression was localized to the implantation site, though the distribution of transfected cells varied with time. Transfected cells were initially observed at the scaffold periphery (day 3), then within the pores and adjacent to the polymer (day 17), and finally throughout the scaffold interior (day 126). Delivery of a plasmid encoding VEGF increased the blood vessel density relative to control. Correlating scaffold design with gene transfer efficiency and tissue formation will facilitate application of plasmid-releasing scaffolds to multiple tissues.

Animals↗

PubMed1998

1998 ARRS President's Award. The potential of in vivo vascular tissue engineering for the treatment of vascular thrombosis: a preliminary report. American Roentgen Ray Society.

OBJECTIVE: Current gene therapy and tissue engineering protocols suffer from a number of inherent limitations. In this study, we examine the feasibility of a new approach for the treatment of vascular thrombosis: in vivo tissue engineering. MATERIALS AND METHODS: Rabbit femoral veins were transfected in situ with either a previously characterized adenoviral-construct-expressing tissue plasminogen activator or a viral (adenoviral-construct-expressing beta-galactosidase) or nonviral (buffer) control and used as cross sections (n = 3). Treated veins were then harvested and grafted into the ipsilateral common femoral artery as an interposition vein graft. A potent stimulus for thrombus formation was then introduced into the recipient artery downstream of the graft. Six days later, the rabbits were sacrificed, and the grafts and downstream arteries were harvested. Vessel segments were then examined for thrombus according to defined anatomic zones. Transfection efficiency and presence of smooth muscle cells in the vein graft were also evaluated. RESULTS: The engineered vein graft showed a significant reduction in thrombus formation within both the graft and the downstream artery relative to nonviral (buffer) and viral (adenoviral-Rous sarcoma virus beta-galactosidase [Adv/RSV-betagal]) controls. Underlying endothelial cell transfection efficiency of 90% was observed in viral controls (Adv/RSV-betagal). A 2.4-fold increase in smooth muscle alpha-actin positive cells in the engineered vein graft was seen compared with nonviral (phosphate-buffered saline) controls. A 10-fold increase in smooth muscle alpha-actin-positive cells in the engineered vein graft relative to viral (Adv/RSV-betagal) controls was also observed. CONCLUSION: In vivo tissue engineering is a new paradigm in molecular medicine that is a viable alternative to conventional gene therapy and tissue engineering for the treatment of vascular thrombosis.

Animals↗

PubMed2004

[Application of hard tissue slicing in research of bone tissue engineering].

OBJECTIVE: To improve the method of hard tissue slicing for research of bone tissue engineering. METHODS: The method of hard tissue slicing especially the key technique-slice mounting had been studied and improved. RESULTS: The experiments showed that our research improved techniques in hard tissue slicing not only in keeping the characteristics of hard tissue slicing, easily stain with HE, Masson, immunohistochemistry, and distinguishing the differences among tissues easily, but also in overcoming the shortcoming of issue shedding easy to happen in the general hard tissue slicing. CONCLUSION: The improved techniques in hard tissue slicing is a more useful hard tissue slicing techniques.

Animals↗

PubMed2001

Smooth muscle cell growth in photopolymerized hydrogels with cell adhesive and proteolytically degradable domains: synthetic ECM analogs for tissue engineering.

Photopolymerizable polyethylene glycol (PEG) derivatives have been investigated as hydrogel tissue engineering scaffolds. These materials have been modified with bioactive peptides in order to create materials that mimic some of the properties of the natural extracellular matrix (ECM). The PEG derivatives with proteolytically degradable peptides in their backbone have been used to form hydrogels that are degraded by enzymes involved in cell migration, such as collagenase and elastase. Cell adhesive peptides, such as the peptide RGD, have been grafted into photopolymerized hydrogels to achieve biospecific cell adhesion. Cells seeded homogeneously in the hydrogels during photopolymerization remain viable, proliferate, and produce ECM proteins. Cells can also migrate through hydrogels that contain both proteolytically degradable and cell adhesive peptides. The biological activities of these materials can be tailored to meet the requirements of a given tissue engineering application by creating a mixture of various bioactive PEG derivatives prior to photopolymerization.

Animals↗

PubMed2006

Electrospinning versus knitting: two scaffolds for tissue engineering of the aortic valve.

Two types of scaffolds were developed for tissue engineering of the aortic valve; an electrospun valvular scaffold and a knitted valvular scaffold. These scaffolds were compared in a physiologic flow system and in a tissue-engineering process. In fibrin gel enclosed human myofibroblasts were seeded onto both types of scaffolds and cultured for 23 days under continuous medium perfusion. Tissue formation was evaluated by confocal laser scanning microscopy, histology and DNA quantification. Collagen formation was quantified by a hydroxyproline assay. When subjected to physiologic flow, the spun scaffold tore within 6 h, whereas the knitted scaffold remained intact. Cells proliferated well on both types of scaffolds, although the cellular penetration into the spun scaffold was poor. Collagen production, normalized to DNA content, was not significantly different for the two types of scaffolds, but seeding efficiency was higher for the spun scaffold, because it acted as a cell impermeable filter. The knitted tissue constructs showed complete cellular in-growth into the pores. An optimal scaffold seems to be a combination of the strength of the knitted structure and the cell-filtering ability of the spun structure.

Aortic Valve↗

PubMed2005

Hydrophobicity as a design criterion for polymer scaffolds in bone tissue engineering.

Porous polymeric scaffolds play a key role in most tissue-engineering strategies. A series of non-degrading porous scaffolds was prepared, based on bulk-copolymerisation of 1-vinyl-2-pyrrolidinone (NVP) and n-butyl methacrylate (BMA), followed by a particulate-leaching step to generate porosity. Biocompatibility of these scaffolds was evaluated in vitro and in vivo. Furthermore, the scaffold materials were studied using the so-called demineralised bone matrix (DBM) as an evaluation system in vivo. The DBM, which is essentially a part of a rat femoral bone after processing with mineral acid, provides a suitable environment for ectopic bone formation, provided that the cavity of the DBM is filled with bone marrow prior to subcutaneous implantation in the thoracic region of rats. Various scaffold materials, differing with respect to composition and, hence, hydrophilicity, were introduced into the centre of DBMs. The ends were closed with rat bone marrow, and ectopic bone formation was monitored after 4, 6, and 8 weeks, both through X-ray microradiography and histology. The 50:50 scaffold particles were found to readily accommodate formation of bone tissue within their pores, whereas this was much less the case for the more hydrophilic 70:30 counterpart scaffolds. New healthy bone tissue was encountered inside the pores of the 50:50 scaffold material, not only at the periphery of the constructs but also in the center. Active osteoblast cells were found at the bone-biomaterial interfaces. These data indicate that the hydrophobicity of the biomaterial is, most likely, an important design criterion for polymeric scaffolds which should promote the healing of bone defects. Furthermore, it is argued that stable, non-degrading porous biomaterials, like those used in this study, provide an important tool to expand our comprehension of the role of biomaterials in scaffold-based tissue engineering approaches.

3T3 Cells↗

PubMed2001

[Fabrication of tissue engineered skin equivalent].

OBJECTIVE: To fabricate artificial human skin with the tissue engineering methods. METHODS: The artificial epidermis and dermis were fabricated based on the successful achievements of culturing human keratinocytes(Kc) and fibroblasts (Fb) as well as fabrication of collagen lattice. It included: 1. Culture of epidermal keratinocytes and dermal fibroblasts: Kc isolated from adult foreskin by digestion of trypsin-dispase. Followed by comparison from aspects of proliferation, differentiation of the Kc, overgrowth of Fb and cost-benefits. 2. Fabrication of extracellular matrix sponge: collagen was extracted from skin by limited pepsin digestion, purified with primary and step salt fraction, and identified by SDS-PAGE. The matrix lattice was fabricated by freeze-dryer and cross-linked with glutaraldehyde, in which the collagen appeared white, fibrous, connected and formed pores with average dimension of 180 to 260 microns. 3. Fabrication artificial human skin: The artificial skin was fabricated by plating subcultured Kc and Fb separately into the lattice with certain cell density, cultured for one week or so under culture medium, then changed to air-liquid interface, and cultured for intervals. RESULTS: The artificial skin was composed of dermis and epidermis under light microscope. Epidermis of the skin consisted of Kc at various proliferation and differentiation stages, which proliferated and differentiated into basal cell layer, prickle cell layer, granular layer, and cornified layer. Conifilament not only increased in number, but also gathered into bundles. Keratohyalin granules at different development stages increased and became typical. The kinetic process of biochemistry of the skin was coincide with the changes on morphology. CONCLUSION: Tissue engineered skin equivalent has potential prospects in application of repairing skin defect with advantages of safe, effective and practical alternatives.

Adult↗

PubMed2005

[Reconstruction of dentin-pulp complex structure by tissue engineering technology].

OBJECTIVE: To investigate the possibility of reconstruction of dentin-pulp complex by tissue engineering technology. METHODS: Rat dental pulp stem cells were seeded into HA-TCP scaffold and incubated for 20 hours in vitro. Then the cell-scaffold complex was implanted subcutaneously into the dorsal side of nude mice. 8 weeks postimplantation, the samples were extracted for histological and immunohistochemical examinations. RESULTS: Three strata of tissue were observed in the hole of HA-TCP scaffold. They were dentin-like tissue, predentin-like tissue and pulp-like tissue respectively from the inner surface of the pore to the center. Dentin tubules were obvious in predentin-like and dentin-like tissue lining from the pulp-like tissue through predentin-like tissue and dentin-like tissue. Cells localized along the edge of pulp-like tissue were dense and polarized, resembling odontoblasts. Immunohistochemical study demonstrated DSP and DMP1 expression in these odontoblast-like cells and in the area of predentin-like tissue. CONCLUSIONS: Tissue-engineered rat dentin-pulp complex was reconstructed by seeding HA-TCP scaffold with rat dental pulp stem cells.

Animals↗

PubMed2006

Differential cell viability of chondrocytes and progenitor cells in tissue-engineered constructs following implantation into osteochondral defects.

Animal studies in cartilage tissue engineering usually include the transfer of cultured cells into chondral or osteochondral defects. Immediately at implantation, the cells are exposed to a dramatically changed environment. The aim of this study was to determine the viability of two cell types currently considered for cellular therapies of cartilage defects-chondrocytes and progenitor cells-shortly after exposure to an osteochondral defect in rabbit knees. To that end, autogenic chondrocytes and periosteal cells were labeled with CM-DiI fluorochrome, seeded or cultured in PEGT/PBT scaffolds for periods up to 2 weeks, transferred into osteochondral defects, harvested 5 days postimplantation, and analyzed for cell viability. In order to further elucidate factors effecting cell viability within our model system, we investigated the effect of serum, 2) extracellular matrix surrounding implanted cells, 3) scaffold interconnectivity, and 4) hyaluronan, as a known cell protectant. Controls included scaffolds with devitalized cells and scaffolds analyzed at implantation. We found that the viability of periosteum cells (14%), but not of chondrocytes (65-95%), was significantly decreased after implantation. The addition of hyaluronan increased periostium cell viability to 44% (p < 0.05). Surprisingly, cell viability in less interconnected compression-molded scaffolds was higher compared to that of fully interconnected scaffolds produced by rapid prototyping. All other factors tested did not affect viability significantly. Our data suggest chondrocytes as a suitable cell source for cartilage repair in line with clinical data on several chondrocyte-based therapies. Although we did not test progenitor cells other the periosteum cells, tissue-engineering approaches using such cell types should take cell viability aspects into consideration.

Animals↗

PubMed2006

Fabrication and characterization of six electrospun poly(alpha-hydroxy ester)-based fibrous scaffolds for tissue engineering applications.

The most common synthetic biodegradable polymers being investigated for tissue engineering applications are FDA approved, clinically used poly(alpha-hydroxy esters). To better assess the applicability of the electrospinning technology for scaffold fabrication, six commonly used poly(alpha-hydroxy esters) were used to prepare electrospun fibrous scaffolds, and their physical and biological properties were also characterized. Our results suggest that specific, optimized fabrication parameters are required for each polymer to produce scaffolds that consist of uniform structures morphologically similar to native extracellular matrix. Scanning electron microscopy (SEM) revealed a highly porous, three-dimensional structure for all scaffolds, with average fiber diameter ranging from 300nm to 1.5microm, depending on the polymer type used. The poly(glycolic acid) (PGA) and poly(d,l-lactic-co-glycolic acid 50:50) (PLGA5050) fibrous structures were mechanically stiffest, whereas the poly(l-lactic acid) (PLLA) and poly(epsilon-caprolactone) (PCL) scaffolds were most compliant. Upon incubation in physiological solution, severe structural destruction due to polymer degradation was found in the PGA, poly(d,l-lactic acid) (PDLLA), PLGA5050, and poly(d,l-lactic-co-glycolic acid 85:15) (PLGA8515) fibrous scaffolds, whereas PLLA and PCL fibrous scaffolds maintained a robust scaffold structure during the same time period, based on macroscopic and SEM observations. In addition, PLLA scaffolds supported the highest rate of proliferation of seeded cells (chondrocytes and mesenchymal stem cells) than other polymeric scaffolds. Our findings showed that PLLA and PCL based fibrous scaffolds exhibited the most optimal structural integrity and supported desirable cellular response in culture, suggesting that such scaffolds may be promising candidate biomaterials for tissue engineering applications.

Animals↗