SEARCH · PubMed Health

Results for “Biodegradation”

Explore indexed PubMed citations for clinical trials, systematic reviews and public health research. Read source abstracts and follow each citation to its original PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75Linked to original sources

PubMed2006

Performance of direct biofiltration of surface water for reduction of biodegradable organic matter and biofilm formation potential.

Direct biofiltration of surface water may be considered as pre-treatment for membrane filtration, in order to reduce fouling. The biofiltration process was investigated with regard to biodegradable organic matter and biofilm formation, covering the annual variations under moderately cold climate conditions. Granular activated carbon (GAC) and two types of crushed expanded clay (EC) were compared as filter media. To assess the biological properties of the biofilters, viable biomass and respiratory activity was examined. Biofiltration removed assimilable organic carbon (AOC) and biodegradable dissolved organic carbon (BDOC) by about 30% and also reduced the bacterial concentration in the water phase. Also, biofilm formation in the treated water was reduced by 80-90% during summer and winter conditions. The reductions in the investigated parameters were similar in the biofilters with GAC and EC. Likewise, a similar amount and development of biomass was found in the GAC and EC biofilters of comparable grain size with a pronounced stratification from top to bottom of the filter bed. The specific respiratory activity of the biofilter biomass was dependent on raw water temperature. Even though slight correlations between BDOC removal and temperature or respiratory activity were observed, AOC and BDOC removals were mainly dependent on the feed water concentrations of these compounds. The results indicate that direct biofiltration of surface water, by reducing AOC, BDOC and biofilm formation in the water, may be an advantageous pre-treatment for membrane filtration processes.

Biodegradation, Environmental↗

PubMed2006

Effects of nutrient addition on phenol biodegradation rate in biofilm reactors for hypersaline wastewater treatment.

Hypersaline wastewater, generated by many industrial activities, is difficult to treat through conventional biological processes. In this kind of hypersaline environment, complex nutrients are needed for the normal growth of many microorganisms. For this paper, the organisms were taken from a municipal wastewater treatment plant and acclimated to 15% salinity in a biofilm treatment process (Sequencing Batch Biofilm Reactor) during the treatment of phenol-containing synthetic wastewater. They are used to evaluate the effects of nutrient addition on the phenol biodegradation rate. Adding yeast extract, glucose, KCl and four mineral nutrients into the shaking flasks containing wastewater and cultivating organisms, revealed phosphate as the crucial nutrient stimulating phenol biodegradation at 15% salinity. The operation results of the sequencing batch biofilm reactor indicates that phosphate content increased up to five times the original level can increase the phenol removal rate by 150%. A 99% phenol removal efficiency could be achieved by shortening the reaction time in the biofilm reactor from 40 h to 16 h, compared with basic nutrients added. In this article we applied an applicable and effective shaking-culture method to determine nutrient requirements in biotreatment processes without stopping the running reactors.

Biodegradation, Environmental↗

PubMed2003

In-situ biodegradation of tetrachloroethene and trichloroethene in contaminated aquifers monitored by stable isotope fractionation.

Stable carbon isotope analysis of tetrachloroethene (PCE) and trichloroethene (TCE) was applied to evaluatenatural attenuation processes in the upper Quaternary and lower Tertiary aquifer in the area of a former dry-cleaning plant located in Leipzig, Germany. Groundwater samples were taken during one monitoring campaign in 2001. The 13C enrichment in contaminants along the water flow path suggested that both, PCE and TCE were degraded in the Quaternary aquifer. The enrichment of 13C in the residual PCE fraction and an isotope fractionation factor from laboratory experiments were used to calculate the extent of biodegradation in the Quatemary aquifer. These calculations indicated that a major portion of PCE was biodegraded in the course of the plume. In the Tertiary aquifer the carbon isotope ratios of PCE and TCE indicated that the decreasing concentrations of these contaminants were probably not caused by microbial processes.

Biodegradation, Environmental↗

PubMed1998

Investigation into PCB biodegradation using uniformly 14C-labelled dichlorobiphenyl.

Biodegradation of polychlorinated biphenyls (PCBs) in soil is considered to be very complex due to various physico-chemical factors involved. Isotope labelling technique is the best to trace fate of the xenobiotic in the environment. In this work, the uniformly 14C-labelled PCB congener 11 (3,3'-chlorobiphenyl) was chosen as a low chlorinated coplanar biphenyl which was assumed to be readily degraded by microorganisms. Pleurotus ostreatus and two Pseudomonas species, representing white rot fungi and soil bacteria were used separately or in a consortium. The amount of liberated 14CO2 and radio-HPLC, HPLC, GC-MS, and radio-TLC analyses of extracts at the end of a two-month experiment showed that the mineralization of PCB 11 was < 0.4%, volatilization < 3.1%, and 30% of radioactivity was irreversibly bound to the soil matrix. The respective contents of all intermediate metabolites were 4.7 to 10.5 and 2.5 to 2.7% where Pseudomonas alcaligenes alone or in combination with P. putida was applied. 3-Chlorobenzoic acid was the major biodegradation product.

Biodegradation, Environmental↗

PubMed1998

Biodegradation of the acetanilide herbicides alachlor, metolachlor, and propachlor.

Alachlor, metolachlor, and propachlor are detoxified in biological systems by the formation of glutathione-acetanilide conjugates. This conjugation is mediated by glutathione-S-transferase, which is present in microorganisms, plants, and mammals. Other organic sulfides and inorganic sulfide also react through a nucleophilic attack on the 2-chloro group of acetanilide herbicides, but the products are only partially characterized. Sorption in soils and sediments is an important factor controlling the migration and bioavailability of these herbicides, while microbial degradation is the most important factor in determining their overall fate in the environment. The biodegradation of alachlor and metolachlor is proposed to be only partial and primarily cometabolic, and the ring cleavage seems to be slow or insignificant. Propachlor biodegradation has been reported to proceed to substantial (> 50%) mineralization of the ring structure. Reductive dechlorination may be one of the initial breakdown mechanisms under anaerobic conditions. Aerobic and anaerobic transformation products vary in their polarity and therefore in soil binding coefficient. A catabolic pathway for chloroacetanilide herbicides has not been presented in the literature because of the lack of mineralization data under defined cultural conditions.

Acetamides↗

PubMed1993

Neural modelling of the biodegradability of benzene derivatives.

The aim of this paper was to explore the usefulness of a backpropagation neural network (BNN) to estimate the biodegradability of benzene derivatives. 127 chemicals selected from the BIODEG data bank (Syracuse Research Corporation, 1992) were described by means of 20 structural descriptors taking into account the nature and position of the substituents on the benzene ring. Three classes of biodegradability were selected and modelled from the BNN. A 20/5/3 BNN (alpha = 0.8 and eta = 0.5) correctly classified 92% (104/113) of the training and 86% (12/14) of the testing sets. The results were compared to those produced by the BIODEG probability program (Syracuse Research Corporation, Version 2.13).

Algorithms↗

PubMed1996

Descriptors and techniques for quantitative structure-biodegradability studies.

Biodegradation occurs mainly through microbial enzyme attack, and enzyme-catalysed reactions are known to depend on hydrophobic, electronic and steric effects. However, most QSBR studies involve correlation with a single parameter, but there is no consistency regarding the class of parameter. This suggests that biodegradation occurs through a range of different mechanisms. A few QSBR studies have reported the need to include more than one class of parameter in correlations. As well as linear regression analysis, other correlation methods have been used in QSBR investigations. These include discriminant analysis, neural networks and comparative molecular field analysis (CoMFA).

Bacteria↗

PubMed2006

Response surface methodology to obtain beta-estradiol biodegradable microspheres for long-term therapy of osteoporosis.

The purpose of this work was to evaluate the main and interaction effects of formulation factors on the drug encapsulation efficiency of beta-estradiol biodegradable microspheres by applying response surface methodology. A secondary purpose was to obtain an optimized formula for long-term therapy of osteoporosis. A three factor, three level Box-Behnken experimental design was used to get 15 experimental runs. The independent variables were drug/polymer ratio (X1), dispersing agent concentration (X2), and deaggregating agent concentration (X3). The dependent variables were percentage encapsulation efficiency (Y1), cumulative percent drug released (Y2), and percentage yield of the microspheres (Y3). The formulations were prepared by emulsion solvent evaporation technique using ethyl acetate as organic solvent. The optimized formulation was maximized for encapsulation efficiency and further characterized for the particle size distribution, scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared (FT-IR). The mathematical relationship obtained between X1, X2, X3, and Y1 was: Y1 = -129.85 + 29.35X1 + 129.99X2 + 64.82X3 - 3.2X1X2 - 0.29X1X3 - 35.83X2X3 - 2.05X(2)(1) - 13.23X(2)(2) - 5.92X(2)(3) (R2 = 0.99) The equation showed that X1, X2, and X3 affect Y1 positively but interaction between any two of these factors affects Y1 negatively. The most significant interaction was between X2 and X3. The finding indicated that controlled releases beta-estradiol biodegradable microspheres with high encapsulation efficiency and low pulsatile release can be prepared and the quantitative response surface methodology applied helped in understanding the effects and the interaction effects between the three factors applied.

Biodegradation, Environmental↗

PubMed2006

Biodegradation of petroleum hydrocarbons by two Pseudomonas aeruginosa strains with different uptake modes.

The uptake modes of alkanes by two strains (Pseudomonas aeruginosa S and Pseudomonas aeruginosa Y) were compared in this article. It was found that the strain of P. aeruginosa S showed low cell surface hydrophobicity and the surface tension of the broth decreased when the strain was cultivated on alkanes. On the contrary, P. aeruginosa Y showed higher cell surface hydrophobicity and the change in surface tension was not significant. This suggests that P. aeruginosa Y accessed hydrocarbon droplets by direct contact mode, while P. aeruginosa S engaged hydrocarbon droplets by biosurfactant-medium mode. The biodegradation of petroleum hydrocarbons by the two strains was also investigated. The results showed that irrespective of the substrate utilized: liquid hydrocarbons, solid hydrocarbons or crude oil in contaminated soil, the degradation by P. aeruginosa S was faster than that by P. aeruginosa Y. It was also deduced that the produced biosurfactant is advantageous in improving the biodegradation process.

Biodegradation, Environmental↗

PubMed2003

Biodegradation studies of rosin-based polymers.

This study was designed to investigate two rosin-based polymers (R-1 and R-2) for their in vitro and in vivo biodegradation behavior. The in vitro hydrolytic degradation was carried out in buffer solutions of pH 4.4, 7.4, and 10.4 at 37 degrees C. Enzymatic degradation was studied using enzymes lipase, pancreatine, and pectinase. Free films of the two polymers were subcutaneously implanted in rabbits for the in vivo biodegradation. The extent of degradation was determined quantitatively by weight loss and was followed qualitatively by scanning electron microscopy. The extent and the rate of degradation was better in vivo than in vitro. The polymers showed poor enzymatic degradation and a highly pH-dependent hydrolytic degradation.

Animals↗

PubMed2003

Assessment of the biodegradability of dialkyldimethylammonium salts in flow through systems.

A bacterium capable of utilizing the alkyl chains of didecyldimethylammonium salt was isolated from activated sludge. In addition, the isolate also utilized didodecyldimethylammonium salt, ditetradecyldimethylammonium salt and alkyltrimethylammonium salts (C10 to C18) as sole source of carbon and energy. The broad substrate with respect to the alkyl chain length was also demonstrated with oxidation rates of various quaternary ammonium salts by didecyldimethylammonium chloride-grown cells. The oxidation rate decreased with increasing alkyl chain lengths. The main factor impeding the biodegradation of dialkyldimethylammonium salts with long alkyl chains is probably the low bioavailability of water-insoluble chemicals. The biodegradability of dialkyldimethylammonium salts was therefore determined in flow-through columns at concentrations below their aqueous solubility. Dialkyldimethylammonium salts adsorbed on silica gel particles packed in flow-through columns were immediately metabolized by the isolate when dissolved. Microorganisms present in river water pumped through a sterile column degraded dissolved dicocodimethylammonium salts within a week.

Biodegradation, Environmental↗

PubMed2003

Biodegradation of 3-chlorophenol in a sequencing batch reactor.

The present paper shows the results obtained through a study on the biodegradation of 3-chlorophenol (3-CP) in a Sequencing Batch Reactor (SBR). To such a purpose a lab-scale SBR was fed a synthetic wastewater containing 3-CP and nutrients (nitrogen and phosphorus) diluted in tap water. The operating strategy, in terms of both the duration of either the cycle or the react phase, was changed throughout the experimental activity in order to find out the optimal one allowing to ensure constant and high removal efficiency despite the increasing 3-chlorophenol concentration in the feed. Biomass collected from a full-scale continuous flow activated sludge facility treating domestic wastewater was used as seed, after being acclimated to 3-CP by means of several batch tests. The results showed that a periodically operated activated sludge system can be successfully used for the biodegradation of chlorophenol compounds, after the needed members of the microbiological consortium are selected and enriched.

Biodegradation, Environmental↗

PubMed2003

Photolysis and biodegradation of selected resin acids in River Saale water, Germany.

The River Saale is the Elbe's major tributary flowing through the state of Thuringia, Germany and receives organics inputs from several industrial facilities including pulp and paper mills. Resin acids constitute a major class of polar organics and environmental toxins derived primarily from pulp and paper processing of softwoods. Since wastewater treatment methods at pulp and paper mills are not always capable of removing the persistent resin acids prior to effluent discharge, alternative or complementary degradation methods may be required. Here, the facile photodegradation of four resin acids--abietic, dehydroabietic, isopimaric, and pimaric--was observed with pseudo-first-order kinetics when exposed to broad band and UV254-radiation. Further experimentation in rotating annular biofilm reactors with UV-exposed and unexposed River Saale water spiked with abietic and dehydroabietic acids indicated that photolysis is an effective pretreatment method for resin acid biodegradation. The bacterial toxicity of the aqueous resin acids solutions as measured with Microtox luminescence assays decreased with exposure time. Consequently, photo- and biodegradation of the resin acids did not generate any notable amounts of toxic intermediates and/or the intermediates formed were further degraded into compounds of lower toxicity than the parents. With tandem photo- and biological treatment at pulp and paper mills, as well as in-situ degradation by solar radiation and natural biofilms within the River Saale, resin acid inputs can be reduced in both concentration and toxicity to near undetectable levels with little or no ecological significance.

Acids↗

PubMed2002

Bioavailability and biodegradation of prosulfocarb in soil.

Active microbial degraders of the herbicide prosulfocarb (PSC) were isolated to evaluate their performance in soil with a view to their use for bioremediation. The isolated cultures (a microbial consortium and a Pseudomonas sp. strain) were active when tested in mineral medium with PSC as the only carbon source, but had an adverse effect on the soil indigenous microflora. Biodegradation in the inoculated soils was thus lower than in the uninoculated soil when only the indigenous microflora was present. Further tests showed that the strong affinity of PSC for soil organic matter affected its bioavailability and hence its biodegradation by the inocula. Bioremediation of PSC contaminated soils could thus be undertaken by biostimulation of indigenous microflora.

Bacteria↗

PubMed2002

Local hemostasis during laparoscopic partial nephrectomy using biodegradable hydrogels: initial porcine results.

BACKGROUND AND PURPOSE: Despite the advance of laparoscopic partial nephrectomy, significant technical limitations remain with regard to control of bleeding and closure of the collecting system. An attractive approach on the horizon for local hemostatic and wound control is the use of local tissue sealants. To date, sealants remain largely derived from natural biologic products and are difficult to apply laparoscopically with precise local control. In this study, we examined the novel strategy of forming occlusive tissue-adherent hydrogels utilizing a synthetic biodegradable polyethylene glycol-lactide copolymer (PEG-lactide) as an in situ occlusive barrier for hemostasis and wound control. Specifically, the objects of this study were to determine if PEG-lactide hydrogels could be formed intraperitoneally on renal tissue, to test the adhesiveness of the hydrogels to injured renal parenchyma, and to evaluate the ability of adherent hydrogel barriers to limit renal parenchymal bleeding and collecting system leakage following renal pole amputation or wedge excision. MATERIALS AND METHODS: Five kidneys from three female pigs were used in a nonsurvival study. A standardized model for laparoscopic partial nephrectomy was created by performing wedge excision or polar amputation under vascular control using a laparoscopic Satinsky clamp. Bleeding briskness following injury was assessed utilizing a scoring system and free blood quantitated comparing a conventional "clamp and wait" strategy with an adherent hydrogel strategy. For the hydrogel group, PEG-lactide hydrogel primer and macromer were applied through laparoscopic ports. The hydrogel was polymerized using a xenon light source, and the pedicle clamp was released to observe for bleeding. A subsequent opposite polar injury was created to confirm renal perfusion and the sites were compared. The kidneys were removed, and the adhesion of the hydrogel to the renal parenchyma was examined. RESULTS: The PEG-lactide macromer was effectively applied to five kidneys following partial nephrectomy. In all cases, successful intraperitoneal in situ polymerization was achieved, with resultant hydrogel formation. Polymeric hydrogel adhesion to the cut renal parenchyma was assessed semiquantitatively following vigorous cyclic washing. In all cases, polymer gels remained adherent without any evidence of peeling, delamination, or separation from the underlying tissue surface. In the control group, the mean bleeding score was 2.63 +/- 0.48 v 0.00 +/- 0.00 in the gel-treated group (P < 0.001). Blood loss in the control group was 56 +/- 5 ml v 0.00 +/- 0.00 in the gel-treated group (P < 0.001). In an ex vivo retrograde ureteral perfusion, no leakage was observed at pressure as high as 100 mm Hg. CONCLUSIONS: In this feasibility study, a biodegradable PEG-lactide polymer system photopolymerized rapidly in situ on exposed renal parenchymal surfaces, forming adherent hydrogel barriers. When applied during vascular clamping, an adequate physical bond and patch-like cap was created to prevent bleeding at physiologic renal perfusion pressures. Use of locally applied occlusive hydrogels holds promise for hemostasis and local wound control during laparoscopic urologic procedures.

Absorbable Implants↗

PubMed2002

Synergistic effects of physical and chemical guidance cues on neurite alignment and outgrowth on biodegradable polymer substrates.

This article demonstrates that directional outgrowth of neurites is promoted by applying a combination of physical and chemical cues to biodegradable polymer substrates. Films of poly-D,L-lactic acid and poly(lactide-co-glycolide) were micropatterned to form grooves on substrate surfaces, using novel indirect transfer techniques developed specifically for biodegradable polymers that cannot be micropatterned directly. Laminin was selectively adsorbed in the grooves. Whole and dissociated dorsal root ganglia were seeded on the substrates and neurite outgrowth and alignment along the microgrooves were measured. The microgrooves provide physical guidance, whereas laminin provides chemical cues to the neurons. The groove depth and spacing were found to significantly influence neurite alignment. The presence of laminin was found to promote neurite adhesion and outgrowth along the grooves. Using a combination of optimized physical and chemical cues, excellent spatial control of directional neurite outgrowth, with up to 95% alignment of neurites, was obtained. The synergistic effect of physical and chemical guidance cues was found to be more effective than individual cues in promoting directional outgrowth of neurites.

Animals↗

PubMed1999

Synthetic, implantable, biodegradable polymers for controlled release of radiosensitizers.

INTRODUCTION: Synthetic, implantable, biodegradable polymers offer the sustained local release of disparate therapeutic agents for the treatment of human malignant brain tumors. The role of polymeric devices for the local delivery of radiosensitizers remains unexplored, however. We therefore quantified the release of the representative radiosensitizers IUdR (5-iodo-2'-deoxyuridine), tirapazamine (3-amino-1,2,4-benzotriazine-1,4-dioxide) and etanidazole [N-(2-hydroxyethyl)-2-nitro-1-imidazole-1-acetamide] from the [(poly(bis(p-carboxyphenoxy)-propane) (PCPP):sebacic acid (SA) (PCPP:SA ratio 20:80)] polymer. METHODS: For measurements of controlled release, triplicate polymer discs were incubated for known intervals in 2 ml 0.1 phosphate-buffered saline, pH 7.4, 37 degrees C. Using a predefined schedule, the supernatant fractions were systematically removed and replaced with fresh solution. The supernatant fractions were measured. The cumulative percentage of the loaded drug that appeared in these serial supernatant fractions was plotted vs. time. The percentage of the drug that was loaded into each polymer and that was released vs. time was fit to the power function of the form y = (a) x tb, where y is the cumulative released agent, a and b are constants and t is time (days). RESULTS: The IUdR was released over an interval of approximately one week, while the release of the tirapazimine persisted for over 100 days. The etanidazole was released most rapidly, over a period of hours. Modeling of release showed that regardless of percentage loading of the drug, the monoexponential function showed high correlation of the fit of the plot of the release vs. time. CONCLUSIONS: These results suggest that the hydrophilicity and percentage loading of the drug predominantly determine the rate of release. Based upon these results, IUdR and tirapazamine warrant preclinical testing for radiosensitization of human malignant brain tumors via the synthetic, implantable, biodegradable polymeric devices.

Biocompatible Materials↗

PubMed1999

Ocular cell monolayers cultured on biodegradable substrates.

The aim of this study was to culture retinal pigment epithelial (RPE) and corneal endothelial cells on biodegradable substrates for future use in monolayer transplantation in the eye. The biodegradable polymers, poly-l-lactic (PLLA) and poly-dl-lactic-co-glycolic acid (85:15) (PLGA) (both of molecular weight 105 kd) were the biomaterials used. All materials were seeded with either pig/human retinal pigment epithelial cells or rabbit corneal endothelial cells and were maintained in tissue culture conditions. Upon confluency, the cell density was calculated and cell viability determined. All monolayers were stained with phalloidin-rhodamine for F-actin and antibodies to the tight junction (zonula occludens) protein, ZO1, to demonstrate the presence of tight junctions. The final cell density of human RPE monolayers on PLLA films was 2950 cells/mm(2) (+/-185). The final cell density of pig RPE on PLLA and PLGA film was 2350 cells/mm(2) (+/-152 and 178, respectively). Rabbit corneal endothelial cells had a final cell density of 2650 cells/mm(2) (+/-164). F-actin staining revealed a circumferential ring of actin filaments in all of the cells grown on substrates. ZO(1) immunohistochemistry demonstrated staining along the lateral cell borders of all cell types. The successful culture of retinal pigment epithelial and corneal endothelial monolayers on these substrates may have potential for transplanting cell monolayers in the eye to improve vision.

Actins↗