PubMed Health⌕ Search

Biomedical subjects

Benjamin Chu

Publications and source records attributed to Benjamin Chu.

At least 19 recordsLinked to original sources

Uncovering heterogeneous effects via localized feature selection.

Identifying features that interact to trigger disease, while accounting for heterogeneity across diverse populations, is essential for the development of precision and targeted medicine. Despite the availability of vast and complex health-related datasets, most existing works focus on identifying disease-associated features at the population level or within a few subpopulations, often overlooking individual-level heterogeneity within these groups. To address this limitation, we propose a framework that utilizes localized test statistics to identify disease-associated features tailored to individual profiles. Our method leverages the recently developed knockoffs methodology to control the noise level of the selection set so that the results are replicable. Moreover, it allows for the discovery of hidden heterogeneous effects within the data, as demonstrated in an application to single-cell RNA sequencing data for Alzheimer's disease. By aggregating localized feature selection results, our framework also enables powerful population-level feature selection. Our framework provides a powerful tool for exploratory studies of precision medicine, offering the potential to generate novel hypotheses for confirmatory biological experiments.

Alzheimer Disease↗

Water soluble complexes of chitosan-g-MPEG and hyaluronic acid.

Novel water soluble, biocompatible, and highly viscoelastic polyelectrolyte complexes were prepared by mixing of positively charged chitosan grafted with poly (ethylene glycol) monomethyl ether (CS-g-MPEG) and negatively charged hyaluronic acid (HA). CS-g-MPEGs having different degrees of substitution were synthesized by reacting chitosan with MPEG-aldehyde. The molecular structure, thermal and rheological properties, as well as biocompatibility of CS-g-MPEG/HA complexes were characterized. Rheological results showed that a small amount of HA could greatly enhance the viscosity of CS-g-MPEG solution. The highest viscosity was obtained when the charge ratio of CS-g-MPEG/HA was close to 1.0. Small-angle X-ray scattering measurements provided some insights into the lamellar structure of the CS-g-MPEG/HA complex. The CS-g-MPEG/HA complex system offers promising potentials in pharmaceutical, cosmetic, and biotechnology applications (e.g., cell scaffold, artificial synovial fluid, and drug/gene delivery medium).

Biocompatible Materials↗

Polymer-assisted growth of molybdenum oxide whiskers via a sonochemical process.

Whiskers of molybdenum oxides with high aspect ratios were synthesized from peroxomolybdate precursor solutions in the presence of small amounts of poly(ethylene glycol) (PEG) via a sonochemical process at temperatures of 25-70 degrees C. Irradiation with ultrasound reduces the time needed for the growth of micrometer-sized whiskers from weeks to a few hours. The simplicity of the sonochemical approach also compares favorably to a hydrothermal/solvothermal process. The morphology, crystal structure, and other characteristics of the whiskers were characterized by scanning electron microscopy, transmission electron microscopy, selective area electron diffraction, energy-dispersive X-ray spectroscopy, wide-angle X-ray diffraction, Raman spectroscopy, thermogravimetric analysis, differential scanning calorimetry, and the Brunauer-Emmett-Teller method. The surface area of the calcified molybdenum oxide whiskers (55.4 m2/g) was found to be much higher than those of molybdenum oxide nanofibers (35 m2/g) or nanorods (13.4 m2/g) The growth rate of various crystal faces could be postulated to be controlled by the binding of peroxomolybdate ions to pseudo-crown ether cavities formed by PEG. The reduction of molybdenum oxide to produce mixed-valent oxides and their growth could also be controlled by the reducing ability of PEG. The aspect ratio of the molybdenum oxide whiskers increased with decreasing concentration in the initial peroxomolybdate precursor solution. Whether the precursor solution species was H2Mo2O3(O2)4(H2O)2, H2MoO2(O2)2, or MoO2(OH)(OOH), the peroxide group in all the species disproportionates to give the final product MoO3 by a catalytic process. On the basis of experimental evidence of the dual role of glycols, a mechanism for the growth of the molybdenum oxide whiskers is proposed.

Journal Article↗

Functional nanofibrous scaffolds for bone reconstruction.

DNA compaction, encapsulation and stabilization strategies as well as a scheme for DNA chain stabilization by complex formation with modified fullerenes for gene delivery are discussed. DNA can be compacted in organic solvents and encapsulated with amphiphilic triblock copolymers. The rapid removal of the solvent mixtures by electrospinning together with a biodegradable polymer preserves the globular DNA conformation and can be used for bone reconstruction applications. Cationic fullerene surfactants can decorate and stabilize DNA coils in aqueous solution. The complex formation process is studied by static light scattering and analyzed in detail.

Adenoviridae↗

Separation of DNA with different configurations on flat and nanopatterned surfaces.

We demonstrate that electrophoresis on a flat Si substrate is an effective method in separation of DNA with different configurations, e.g., linear, supercoiled, and relaxed or DNA of different length, e.g., supercoiled DNA ladder. The surface separation arises from the different number of contacts due to the conformational differences between adsorbed DNA chains. Imposing a Au nanopattern on the Si surface further improves the separation effect. The simulation of electric field on this patterned surface by the finite element method shows that Au nanodots act as local pinning points for DNA segments due to dielectrophoretic force. The results of molecular dynamics simulation showed that the conformational differences between adsorbed polymer chains were amplified on the patterned surface and enhanced separations were achieved, which are consistent with the experimental results.

Computer Simulation↗

Designing polymer matrix for microchip-based double-stranded DNA capillary electrophoresis.

Polyacrylamide (PAM) was used as a model polymer to build up an empirical model that relates polymer molecular weight, polymer concentration and solution viscosity. The desired random copolymers of acrylamide (AM) and N,N-dimethylacrylamide (DMA) used as DNA separation media for different specifications were synthesized under the guidance of the empirical model. The separation performances of rationally designed copolymers were tested in a 1.2 cm long separation channel, simulating microchip-based capillary electrophoresis. pBR322/HaeIII digest was successfully separated with good separation resolution and fast speed. Validation of the sieving ability of our polymers was performed in the Agilent 2,100 Bioanalyzer. The results of the 10 bp (base pair) DNA ladder separation demonstrate the potential of our approach for the sieving matrix in microchip-based electrophoresis.

Acrylamides↗

Reversible thermo-responsive sieving matrix for oligonucleotide separation.

A reversible thermo-responsive gel system, consisting of Pluronic copolymer mixture of F87 and F127, has been used to successfully carry out the separation of oligonucleotides, for the first time, by microchip-based capillary electrophoresis. Pluronic triblock copolymers F87 (E(61)P(40)E(61)) and F127 (E(99)P(69)E(99)), with E, P, and subscript denoting oxyethylene, oxypropylene, and segment length respectively, have a unique temperature dependent viscosity-adjustable property and a dynamic coating ability in aqueous solution, including 1 x TBE buffer. The mixture solution has a reversible thermo-responsive property and its sol-gel transition temperature can be adjusted ranging from about 17 degrees C to 38 degrees C by varying the relative weight ratio of F87 and F127 at an optimized concentration of approximately 30% (w/v) for oligonucleotide separations. Oligonucleotide sizing markers ranging from 8 to 32 base could be successfully separated in a 1.5 cm long separation channel by the mixture solution in its gel-like state. A 30% (w/v) with a F87/F127 weight ratio of 1 ratio 2 which has a "sol-gel" transition point of about 26 degrees C shows the best sieving ability. The sieving ability of the mixture solution was further confirmed in an Agilent Bioanalyzer 2100 system. Fast separation of oligonucleotides has been achieved within 40 s with one base resolution.

Electrophoresis, Microchip↗

Influence of electric field intensity, ionic strength, and migration distance on the mobility and diffusion in DNA surface electrophoresis.

In order to increase the separation rate of surface electrophoresis while preserving the resolution for large DNA chains, e.g., genomic DNA, the mobility and diffusion of Lambda DNA chains adsorbed on flat silicon substrate under an applied electric field, as a function of migration distance, ionic strength, and field intensity, were studied using laser fluorescence microscope. The mobility was found to follow a power law with the field intensity beyond a certain threshold. The detected DNA peak width was shown to be constant with migration distance, slightly smaller with stronger field intensity, but significantly decreased with higher ionic strength. The molecular dynamics simulation demonstrated that the peak width was strongly related with the conformation of DNA chains adsorbed onto surface. The results also implied that there was no diffusion of DNA during migration on surface. Therefore, the Nernst-Einstein relation is not valid in the surface electrophoresis and the separation rate could be improved without losing resolution by decreasing separation distance, increasing buffer concentration, and field intensity. The results indicate the fast separation of genomic DNA chains by surface electrophoresis is possible.

Bacteriophage lambda↗

Nanostructured polymer matrix for oligonucleotide separation.

A nanostructured copolymer matrix has successfully separated oligonucleotides with high resolution by CE using a very short separation channel which simulates the real microchip condition for the first time. The triblock copolymer, E(45)B(14)E(45) (B20-5000) with E, B, and subscript denoting oxyethylene, oxybutylene, and segment length, respectively, has a unique temperature-dependent viscosity-adjustable property and a dynamic coating ability in 1xTBE buffer (89 mM Tris, 89 mM boric acid, 2 mM EDTA in Milli-Q water). The B-block is hydrophilic at low temperatures, e.g., 4 degrees C, and the polymer solution has a very low viscosity of about 100 cP in a 32.5% w/v solution. At room temperatures, the B-block becomes hydrophobic due to a breakdown of hydrogen bonds between B-blocks and water, and the polymer matrix forms a body-centered cubic structure at high concentrations. Oligonucleotide sizing markers ranging from 8 to 32 base could be successfully separated with one-base resolution in a 1.5 cm long separation channel by E(45)B(14)E(45) in its gel-like state.

Electrophoresis, Capillary↗

Scale-up development of high-performance polymer matrix for DNA sequencing analysis.

Linear polyacrylamide (LPA) has been widely used as a replaceable separation matrix in CE. An increase in the molecular weight of the separation medium favors the separation of larger DNA fragments. In order to obtain ultrahigh-molecular-weight (UHMW) LPA, a "frozen" method was developed to synthesize the LPA homopolymer. This approach has three major advantages when compared with other existing routes of LPA synthesis: (i) long LPA chains could be obtained easily, with their average molecular weight (MW) being in the high 10 MDa range; (ii) the desired MW could be adjusted over a broad range by controlling the temperature and the concentration of initiators during synthesis; (iii) the product solution contains only a tiny amount of impurity besides the solvent and LPA. Both static and dynamic laser light scattering measurements were carried out to characterize the synthesized LPA in the buffer solution. The DNA sequencing matrix prepared from LPA using this method was studied and the results were compared with the newly developed commercial product POP7 from Applied Biosystems. It should be noted that this approach can be applied to synthesize other water-soluble polymers, resulting in UHMW products because the chain transfer constant is smaller at lower temperatures.

Acrylic Resins↗

Mineralization of hydroxyapatite in electrospun nanofibrous poly(L-lactic acid) scaffolds.

A highly porous electrospun poly(L-lactic acid) (PLLA) nanofibrous scaffold was used as a matrix for mineralization of hydroxyapatite. The mineralization process could be initiated by immersing the electrospun scaffold in the simulated body fluids (SBF) at 37 degrees C for varying periods of time. Scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), wide-angle X-ray diffraction (WAXD), Fourier transform infrared (FTIR), and Raman spectroscopy were used to characterize the composition and the structure of the deposited mineral on the nanofiber surface. Results indicated that the mineral phase was a carbonated apatite with thin flake-like nanostructures. The effects of functional groups on the scaffold surface and anionic additives in the incubation fluids on the nucleation and growth of the mineral were investigated. It was found that a minuscule amount of anionic additives (e.g., citric acid and poly-L-aspartic acid) in the SBF could effectively inhibit the mineral growth. Surface modification of the scaffold was carried out by hydrolysis of PLLA scaffold in NaOH aqueous solution, where carboxylic acid groups were produced without compromising the scaffold integrity. The mineralization process from modified PLLA electrospun scaffolds was significantly enhanced because the calcium ions can bind to the carboxylate groups on the fiber surface.

Anions↗

Myotube assembly on nanofibrous and micropatterned polymers.

Skeletal muscle consists of parallel bundles of myotubes formed by the fusion of myoblasts. We fabricated nanofibrous and micropatterned polymers as cell culture substrates to guide the morphogenesis of muscular tissue. The nanoscale and microscale topographic features regulate cell and cytoskeleton alignment, myotube assembly, myotube striation, and myoblast proliferation. This bottom-up approach from nanoscale to tissue level demonstrates the potential of nanofibrous polymers for engineering the assembly of cell and tissue structure.

Animals↗

Patterning polyethylene oligomers on carbon nanotubes using physical vapor deposition.

Periodic patterning on one-dimensional (1D) carbon nanotubes (CNTs) is of great interest from both scientific and technological points of view. In this letter, we report using a facile physical vapor deposition method to achieve periodic polyethylene (PE) oligomer patterning on individual CNTs. Upon heating under vacuum, PE degraded into oligomers and crystallized into rod-shaped single crystals. These PE rods periodically decorate on CNTs with their long axes perpendicular to the CNT axes. The formation mechanism was attributed to "soft epitaxy" growth of PE oligomer crystals on CNTs. Both SWNTs and MWNTs were decorated successfully with PE rods. The intermediate state of this hybrid structure, MWNTs absorbed with a thin layer of PE, was captured successfully by depositing PE vapor on MWNTs detached from the solid substrate, and was observed using high-resolution transmission electron microscopy. Furthermore, this hybrid structure formation depends critically on CNT surface chemistry: alkane-modification of the MWNT surface prohibited the PE single-crystal growth on the CNTs. We anticipate that this work could open a gateway for creating complex CNT-based nanoarchitectures for nanodevice applications.

Microscopy, Atomic Force↗

In vitro non-viral gene delivery with nanofibrous scaffolds.

Extracellular and intracellular barriers typically prevent non-viral gene vectors from having an effective transfection efficiency. Formulation of a gene delivery vehicle that can overcome the barriers is a key step for successful tissue regeneration. We have developed a novel core-shelled DNA nanoparticle by invoking solvent-induced condensation of plasmid DNA (beta-galactosidase or GFP) in a solvent mixture [94% N,N-dimethylformamide (DMF) + 6% 1x TE buffer] and subsequent encapsulation of the condensed DNA globule in a triblock copolymer, polylactide-poly(ethylene glycol)-polylactide (L8E78L8), in the same solvent environment. The polylactide shell protects the encapsulated DNA from degradation during electrospinning of a mixture of encapsulated DNA nanoparticles and biodegradable PLGA (a random copolymer of lactide and glycolide) to form a nanofibrous non-woven scaffold using the same solution mixture. The bioactive plasmid DNA can then be released in an intact form from the scaffold with a controlled release rate and transfect cells in vitro.

Animals↗

Fractal behavior of functionalized fullerene aggregates. I. Aggregation of two-handed tetraaminofullerene with DNA.

In tris-buffered saline (TBS) with a trace of dimethylformamide (DMF), the homoaggregation process of a functionalized fullerene, the two-handed tetraaminofullerene (TH), and the heteroaggregation process (complex formation) of TH with DNA (pGL3-control plasmid) were studied dynamically by using a combination of static and dynamic laser light scattering measurements. Fractal behavior was investigated in the aggregation process of both TH homoaggregates and TH-DNA heteroaggregates. The stability of aggregates in solution depends on the molar concentration ratio R(M), defined as the molar ratio of moles of TH to moles of the DNA base pair. Higher R(M) values resulted in lower aggregate stability. The transition of the fractal dimension (Df) in TH homoaggregation by rapidly mixing 3.78 microM TH with an equal volume of the blank buffer was found to vary from a value of 1.46 to 2.02. Dynamic light scattering results revealed that, in the aggregation process, the change in the size distribution of aggregates with time could be related to a Df transition. In the Df transition region, the size distribution of homoaggregates displayed a drastic change from a single-mode distribution to a bimodal distribution, which clearly suggested a restructuring process with the formation of large aggregates. When the aggregation process finally reached equilibrium, Df = 2.02, the size of the homoaggregates had a single mode but a broad distribution. However, TH-DNA heteroaggregation showed a Df transition from 1.58 to 1.7, but over a shorter time range of less than 5 min. Then, the Df value fluctuated in the range of 1.7 and finally reached an equilibrium value of Df approximately 1.78, which was independent of molar concentration. There are two main action forces involved in the heteroaggregation process: van der Waals forces and attractive electrostatic forces, with the latter one being stronger and faster than that of the former. Therefore, a two-step action could occur in the heteroaggregation process. In the beginning of mixing, the attractive electrostatic forces dictated the aggregation process, and then van der Waals forces also got involved in the entire aggregation process. By using an initial concentration of 3.78 microM each and R(M) = 1, TH-DNA heteroaggregates showed more stable solution behavior than the homoaggregates. The lower Df value of the heteroaggregates could be related to a looser compact structure. Results from scanning electron microscopy (SEM) also disclosed the different textures between TH homoaggregates and TH-DNA heteroaggregates; the former had a more dense packing than the latter one.

DNA↗

Morphogenesis of highly ordered mixed-valent mesoporous molybdenum oxides.

Control of the size, shape, and structure of mesoporous transition metal oxide materials is important in their correlations with corresponding optoelectronic and photocatalytic properties. Highly ordered cubic phases of mixed-valent mesoporous molybdenum oxides have been prepared by the reduction and decomposition of aqueous molybdenum precursor solution in the presence of poly(ethylene oxide) under ultrasonic irradiation. Large-scale uniform molybdenum oxide particles with well-defined crystal-like morphologies (ball-like, rhombic dodecahedral, and cubic shapes) were synthesized and found to be controllable by modifying the molecular chain length of the polymeric additive. Molybdenum oxides with an average oxidation state of 4.8 form a cubic lattice of open mesoporous structures.

Adsorption↗

High flux filtration medium based on nanofibrous substrate with hydrophilic nanocomposite coating.

A novel high flux filtration medium, consisting of a three-tier composite structure, i.e., a nonporous hydrophilic nanocomposite coating top layer, an electrospun nanofibrous substrate midlayer, and a conventional nonwoven microfibrous support, was demonstrated for oil/water emulsion separations for the first time. The nanofibrous substrate was prepared by electrospinning of poly(vinyl alcohol) (PVA) followed by chemical cross-linking with glutaraldehyde (GA) in acetone. The resulting cross-linked PVA substrates showed excellent water resistance and good mechanical properties. The top coating was based on a nanocomposite layer containing hydrophilic polyether-b-polyamide copolymer or a cross-linked PVA hydrogel incorporated with surface-oxidized multiwalled carbon nanotubes (MWNTs). Scanning electron microscopy (SEM) examinations indicated that the nanocomposite layer was nonporous within the instrumental resolution and MWNTs were well dispersed in the polymer matrix. Oil/ water emulsion tests showed that this unique type of filtration media exhibited a high flux rate (up to 330 L/m2-h at the feed pressure of 100 psi) and an excellent total organic solute rejection rate (99.8%) without appreciable fouling. The increase in the concentration of surface-oxidized MWNT in the coating layer generally improves the flux rate, which can be attributed to the generation of more effective hydrophilic nanochannels for water passage in the composite membranes.

Emulsions↗

Quasi-interpenetrating network formed by polyacrylamide and poly(N,N-dimethylacrylamide) used in high-performance DNA sequencing analysis by capillary electrophoresis.

Quasi-interpenetrating network (IPN) formed by polyacrylamide and poly(N,N-dimethylacrylamide) was designed, synthesized, and tested as a high-performance DNA separation medium by capillary electrophoresis. The performance of quasi-IPN on DNA sequencing was determined by the acrylamide to dimethylacrylamide molar ratio, polyacrylamide molecular weight, and its size distribution. Under optimal operating conditions, quasi-IPN was able to achieve one-color DNA sequencing up to 1000 bases in 39 min, or 1200 bases in 60 min. Its performance was compared with some of the existing commercialized products, such as POP6 from Applied Biosystems and MegaBACE matrix from Amersham Biosciences. By using the ABI 310 Genetic Analyzer, even without optimized base-calling software, quasi-IPN yielded a read length of up to 700 bases of contiguous sequence (50-750 bases) in 35 min with 99.6% accuracy, or 750 bases of contiguous sequence (50-800 bases) in 37 min with 98.0% accuracy.

Acrylamides↗