PubMed Health⌕ Search

Biomedical subjects

Benjamin Chu

Publications and source records attributed to Benjamin Chu.

At least 37 records · Page 2Linked to original sources

Fast separation of single-stranded oligonucleotides by capillary electrophoresis using OliGreen as fluorescence inducing agent.

The fast separation of oligonucleotide (oligos) sizing marker by CE using OliGreen and including effects due to the concentration of separation medium and urea denaturant is presented. OliGreen dye is found to be more sensitive than ethidium bromide (by a factor of about 6 based on S/N considerations) for the oligos' separations. Higher concentration of F127 in 1xTris-boricacid-EDTA (TBE) up to 30% w/v leads to better resolution of oligos separations. The addition of urea into the separation medium decreases the sensitivity. With an optimized running condition, the oligos sizing marker could be successfully separated with 1-base resolution within 1.3 min by using 30% w/v F127/1xTBE solution as the separation medium at an applied electric field of 800 V/cm in a 3 cm long capillary, the fastest capillary gel electrophoresis separation with high resolution reported to date for oligos in the similar size range.

Buffers↗

Electrospun fine-textured scaffolds for heart tissue constructs.

The structural and functional effects of fine-textured matrices with sub-micron features on the growth of cardiac myocytes were examined. Electrospinning was used to fabricate biodegradable non-woven poly(lactide)- and poly(glycolide)-based (PLGA) scaffolds for cardiac tissue engineering applications. Post-processing was applied to achieve macro-scale fiber orientation (anisotropy). In vitro studies confirmed a dose-response effect of the poly(glycolide) concentration on the degradation rate and the pH value changes. Different formulations were examined to assess scaffold effects on cell attachment, structure and function. Primary cardiomyocytes (CMs) were cultured on the electrospun scaffolds to form tissue-like constructs. Scanning electron microscopy (SEM) revealed that the fine fiber architecture of the non-woven matrix allowed the cardiomyocytes to make extensive use of provided external cues for isotropic or anisotropic growth, and to some extent to crawl inside and pull on fibers. Structural analysis by confocal microscopy indicated that cardiomyocytes had a preference for relatively hydrophobic surfaces. CMs on electrospun poly(L-lactide) (PLLA) scaffolds developed mature contractile machinery (sarcomeres). Functionality (excitability) of the engineered constructs was confirmed by optical imaging of electrical activity using voltage-sensitive dyes. We conclude that engineered cardiac tissue structure and function can be modulated by the chemistry and geometry of the provided nano- and micro-textured surfaces. Electrospinning is a versatile manufacturing technique for design of biomaterials with potentially reorganizable architecture for cell and tissue growth.

Absorbable Implants↗

Incorporation and controlled release of a hydrophilic antibiotic using poly(lactide-co-glycolide)-based electrospun nanofibrous scaffolds.

The successful incorporation and sustained release of a hydrophilic antibiotic drug (Mefoxin, cefoxitin sodium) from electrospun poly(lactide-co-glycolide) (PLGA)-based nanofibrous scaffolds without the loss of structure and bioactivity was demonstrated. The morphology and density of the electrospun scaffold was found to be dependent on the drug concentration, which could be attributed to the effect of ionic salt on the electrospinning process. The drug release behavior from the electrospun scaffolds and its antimicrobial effects on Staphylococcus aureus cultures were also investigated. In all tested scaffolds, the maximum dosage of drug was released after 1 h of incubation in water at 37 degrees C. The usage of the amphiphilic block copolymer (PEG-b-PLA) reduced the cumulative amount of the released drug at earlier time points and prolonged the drug release rate at longer times (up to a 1-week period). The antibiotic drug released from these electrospun scaffolds was effective in their ability to inhibit Staphylococcus aureus growth (>90%). The combination of mechanical barriers based on non-woven nanofibrous biodegradable scaffolds and their capability for local delivery of antibiotics increases their desired utility in biomedical applications, particularly in the prevention of post-surgical adhesions and infections.

Anti-Bacterial Agents↗

Multilayer vesicles and vesicle clusters formed by the fullerene-based surfactant C60(CH3)5K.

The self-assembly behavior of a fullerene-based surfactant, C60(CH3)5K, in water was studied using a combination of static and dynamic light scattering, as well as transmission electron microscopy, and compared to that of the compound C60(C6H5)5K. Both fullerene surfactant systems spontaneously assemble into large vesicles consisting of closed spherical shells formed by bilayers, with critical aggregation concentrations (CAC) lower than 10(-6) g ml(-1). At low concentrations, the aggregate sizes of C60(CH3)5K (radius R approximately 26.8 nm) and C60(C6H5)5K (R approximately 17.0 nm) were found to be substantially different from each other, showing that the change of the substituents surrounding the polar cyclopentadienide head group makes it possible to control the size of the resulting aggregates. Furthermore, the C60(CH3)5K vesicles were found to exist in two qualitatively different types of aggregation with a critical reaggregation concentration (CRC) located at 3.30 x 10(-6) g ml(-1). Above the CRC, larger aggregates were observed (R approximately 37.6 nm), showing a more complex form of supramolecular aggregation, e.g., in terms of multi-bilayer vesicles and/or of clusters of bilayer vesicles.

Journal Article↗

Prevention of postsurgery-induced abdominal adhesions by electrospun bioabsorbable nanofibrous poly(lactide-co-glycolide)-based membranes.

OBJECTIVES: The objective of this study was to evaluate the efficacy of nonwoven bioabsorbable nanofibrous membranes of poly(lactideco-glycolide) for prevention of postsurgery-induced abdominal adhesions. SUMMARY BACKGROUND DATA: Recent reports indicated that current materials used for adhesion prevention have only limited success. Studies on other bioabsorbable materials using a new fabrication technique demonstrated the promising potential of generating an improved and inexpensive product that is suitable for a variety of surgical applications. METHODS: All rats underwent a midline celiotomy. The cecum was identified and scored using an abrasive pad until serosal bleeding was noted on the anterior surface. A 1 x 1 cm of abdominal wall muscle was excised directly over the cecal wound. The celiotomy was then closed in 2 layers immediately (control) after a barrier was laid in between the cecum and the abdominal wall. All rats underwent a second celiotomy after 28 days to evaluate the extent of abdominal adhesions qualitatively and quantitatively. RESULTS: Cecal adhesions were reduced from 78% in the control group to 50% in the group using biodegradable poly(lactide-co-glycolide) (PLGA) nonwoven nanofibrous membranes (n = 10, P = 0.2) and to 22% in the group using membranes containing PLGA and poly(ethylene glycol)/poly(D,L-lactide) (PEG-PLA) blends (n = 9, P = 0.03). Electrospinning method also enabled us to load an antibiotic drug Cefoxitin sodium (Mefoxin; Merck Inc., West Point, PA) with high efficacy. The electrospun PLGA/PEG-PLA membranes impregnated with 5 wt% cefoxitin sodium, which amounts to approximately 10% of the systemic daily dose typically taken after surgery in humans, completely prevented cecal adhesions (0%) in rats. CONCLUSIONS: Electrospun nonwoven bioabsorbable nanofibrous membranes of poly(lactide-co-glycolide) were effective to reduce adhesions at the site of injury using an objective rat model. The membrane acted as a physical barrier but with drug-delivery capability. The combined advantages of composition adjustment, drug-loading capability, and easy placement handling (relatively hydrophobic) make these membranes potentially successful candidates for further clinical evaluations.

Abdomen↗

Characterization of coliphage PR772 and evaluation of its use for virus filter performance testing.

Virus filtration is a key clearance unit operation in the manufacture of recombinant protein, monoclonal antibody, and plasma-derived biopharmaceuticals. Recently, a consensus has developed among filter manufacturers and end users about the desirability of a common nomenclature and a standardized test for classifying and identifying virus-retentive filters. The Parenteral Drug Association virus filter task force has chosen PR772 as the model bacteriophage to standardize nomenclature for large-pore-size virus-retentive filters (filters designed to retain viruses larger than 50 to 60 nm in size). Previously, the coliphage PR772 (Tectiviridae family) has been used in some filtration studies as a surrogate for mammalian viruses of around 50 to 60 nm. In this report, we describe specific properties of PR772 critical to the support of its use for the standardization of virus filters. The complete genomic sequence of virulent phage PR772 was determined. Its genome contains 14,946 bp with an overall G+C content of 48.3 mol%, and 32 open reading frames of at least 40 codons. Comparison of the PR772 nucleotide sequence with the genome of Tectiviridae family prototype phage PRD1 revealed 97.2% identity at the DNA level. By dynamic light-scattering analysis, its hydrodynamic diameter was measured as 82 +/- 6 nm, consistent with use in testing large-virus-retentive filters. Finally, dynamic light-scattering analysis of PR772 preparations purified on CsCl gradients showed that the phage preparations are largely monodispersed. In summary, PR772 appears to be an appropriate model bacteriophage for standardization of nomenclature for larger-pore-size virus-retentive filters.

Biotechnology↗

Preparation and characterization of ibuprofen-loaded poly(lactide-co-glycolide)/poly(ethylene glycol)-g-chitosan electrospun membranes.

Ibuprofen-loaded composite membranes composed of poly(lactide-co-glycolide) (PLGA) and poly(ethylene glycol)-g-chitosan (PEG-g-CHN) were prepared by electrospinning. The electrospun membranes were characterized by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), mechanical evaluation and contact angle measurements. Shrinkage behavior of the membrane in buffer at 37 degrees C was also evaluated. It was found that PLGA glass transition temperature (Tg) decreased with increasing PEG-g-CHN content in the composite membranes, which results in a decrease in tensile stress at break but an increase in tensile strain of the membranes. The degree of shrinkage of these composite membranes decreased from 76 to only 3% when the PEG-g-CHN content in the membranes increased from 10 to 30%. The presence of PEG-g-CHN significantly moderated the burst release rate of ibuprofen from the electrospun PLGA membranes. Moreover, ibuprofen could be conjugated to the side chains of PEG-g-CHN to prolong its release for more than two weeks. The sustained release capacity of the PLGA/PEG-g-CHN composite membranes, together with their compliant and stable mechanical properties, renders them ideal matrices for atrial fibrillation.

Biochemistry↗

Synchrotron SAXS/WAXD and rheological studies of clay suspensions in silicone fluid.

Suspensions of two commercial smectite clays, montmorillonite KSF and montmorillonite K10, in a low-viscosity silicone oil (Dow Corning 245 Fluid) were studied by simultaneous synchrotron small-angle X-ray scattering (SAXS)/wide-angle X-ray diffraction (WAXD) techniques and rheological measurements. In the 0.5% (w/v) KSF clay suspension and two K10 clay suspensions (0.5% and 1.0%), WAXD profiles below 2theta=10.0 degrees did not display any characteristic reflection peaks associated with the chosen montmorillonite clays, while corresponding SAXS profiles exhibited distinct scattering maxima, indicating that both clays were delaminated by the silicone oil. In spite of the large increase in viscosity, the clay suspensions exhibited no gel characteristics. Dynamic rheological experiments indicated that the clay/silicone oil suspensions exhibited the behavior of viscoelasticity, which could be influenced by the type and the concentration of the clay. For the K10 clay suspensions, the frequency-dependent loss modulus (G") was greater in magnitude than the storage modulus (G') in the concentration range from 0.5 to 12.0%. The increase in the clay concentration shifted the crossover point between G' and G" into the accessible frequency range, indicating that the system became more elastic. In contrast, the KSF clay suspension exhibited lower G' and G" values, indicating a weaker viscoelastic response. The larger viscoelasticity response in the K10 clay suspension may be due to the acid treatment generating a higher concentration of silanol groups on the clay surface.

Journal Article↗

DNA capillary electrophoresis using poly(vinyl alcohol). I. Inner capillary coating.

Two new methods of inner capillary coating with poly(vinyl alcohol) (PVAL) have been investigated and evaluated by performing DNA capillary electrophoresis (CE) using PVAL as a separation medium and by measuring the electroosmotic flow (EOF) mobility. The treatment of capillaries with a silanol-group modified PVAL (PVAL-Si) has been found to give good coating effects for improving the resolution of DNA CE and for reducing the EOF. This coating must be effectively achieved by combining the adsorptive property of PVAL chains onto silica with the reaction between the silanol groups of PVAL-Si and the silica surface. The adsorption of PVAL onto silica has been observed by using atomic force microscopy (AFM) for PVAL-Si as well as for a nonmodified PVAL as a control. The coating with PVAL that links to the capillary wall surface with more hydrolytically stable bonding, -Si-C-, has been formed by performing the Grignard reaction, followed by in-capillary polymerization of vinyl acetate (VAc) and hydrolysis. This coating has been found to be effective for improving the resolution of DNA CE and for reducing the EOF.

Adsorption↗

DNA capillary electrophoresis using poly(vinyl alcohol). II. Separation media.

We represent the first extensive study on DNA capillary electrophoresis using various poly(vinyl alcohol) (PVAL)-related polymers as separation media. As a separation medium, PVAL homopolymer has shown poor resolutions probably due to its very strong hydrogen-bonding characteristics, resulting in extensive self-aggregation. On the other hand, poly(vinyl alcohol-co-vinyl acetate) and poly(vinyl alcohol-co-1-vinyl-2-pyrrolidone) (PVAL-VP), both with a degree of polymerization of approximately 3.0x10(3), have been found to give excellent electropherograms with good resolutions for the analysis of double-stranded (ds)DNA. PVAL-VP, with hydrolytic stability in high and low pH regions, has also yielded fair electropherograms for single-stranded (ss)DNA under neutral and alkaline conditions, although further investigation is essential in order to increase the resolutions necessary for DNA sequencing analysis. The separations obtained under alkaline conditions have shown significantly shorter retention times, one-third of that for the current commercial separation media, due to the higher ionization of phosphate groups in the DNA chains.

DNA↗

Study of ethidium bromide effect on dsDNA separation by capillary zone electrophoresis and laser light scattering.

The effect of ethidium bromide (EB) on dsDNA separation was studied by using capillary zone electrophoresis (CZE) and laser light scattering (LLS). By increasing the concentration from 1 to 15 microg/mL, EB showed significant influence on the separation of pBR322 HaeIII in terms of resolution, speed, and signal-over-noise ratio. The physicochemical properties of DNA, such as mobility under electric field, charge-over-size ratio, and hydrodynamic radius, showed two declines, a sharp drop followed by a relaxed decrease, with increasing EB concentration. Such observations could be explained by using two modes of the dye binding process: intercalation and outside binding. The combination of results obtained from CZE and LLS also confirmed the existence of outside binding. Compared with intercalation, outside binding showed a weaker dye concentration dependence in neutralizing the negative charges on the DNA fragments. Static light scattering showed that and of DNA in 1xTris-borate-EDTA (TBE) were increased with increasing EB concentration. / of DNA with dye had a value larger than 1.5, suggesting a random coil conformation.

DNA↗

Control of degradation rate and hydrophilicity in electrospun non-woven poly(D,L-lactide) nanofiber scaffolds for biomedical applications.

Typical properties of poly(D,L-lactide) (PLA)-based scaffolds (films and foams), such as long degradation time, mechanical stiffness and hydrophobicity, are sometimes not suitable for biomedical applications. These properties can be substantially altered by electrospinning of PLA blends with miscible poly(lactide-co-glycolide) (PLGA) random copolymers, poly(lactide-b-ethylene glycol-b-lactide) (PLA-b-PEG-b-PLA) triblock copolymers, and a lactide (used as a hydrolytic catalyst). Electrospun scaffolds based on the multi-component PLA blends, comprised of randomly interconnected webs of sub-micron sized fibers, have a bulk density of 0.3-0.4 g/cm3. In this study, the concentration effects of PLA-b-PEG-b-PLA triblock copolymer and lactide on the cell proliferation and the hydrophilicity of electrospun scaffolds were investigated. Based on in vitro degradation study, we found that the electrospun scaffold having PLA (40 wt%), PLGA (LA/GA=50/50, 25 wt%), PLA-b-PEG-b-PLA (20 wt%), and lactide (15 wt%) underwent a rapid weight loss of approximately 65% in 7 weeks. The hydrophobicity of this membrane, as determined by contact angle measurements in a cell buffer solution, decreased by approximately 50% from 105 degrees (of an electrospun PLA scaffold) to 50 degrees. The selection of suitable chemical compositions in conjunction with the non-invasive electrospinning process is useful in the production of a new kind of biodegradable scaffolds suitable for different biomedical applications such as cell storage and delivery as well as prevention of post-surgical adhesion because of their porosity, mechanical flexibility and tunable biodegradability.

3T3 Cells↗

Density-fluctuation-induced swelling of polymer thin films in carbon dioxide.

We report an anomalous swelling of polymer thin films in carbon dioxide (CO(2)) which is associated (in both locus and form) with the density fluctuation ridge that forms along the extension of the coexistence curve of gas and liquid in the P-T phase diagram. Neutron reflectivity results showed that CO(2) could be sorbed to a large extent ( approximately 60%) in thin polymer films even when the bulk miscibility of the polymer with CO(2) is very poor. The anomalous swelling is found to scale with the polymer radius of gyration (R(g)) and extends to a distance approximately 10 R(g).

Journal Article↗

Copolymer solutions as separation media for DNA capillary electrophoresis.

A review on copolymers used as DNA separation media in capillary electrophoresis is presented. Copolymers can combine the desirable properties of different monomers, yielding many attractive features, such as high sieving ability, low viscosity, self-assembly behavior and dynamic coating ability. Copolymers with different molecular architecture, including block copolymers, random copolymers, and graft copolymers, have been developed and tested as DNA separation media with unique and tailored properties that cannot be achieved easily by using only homopolymers.

DNA↗

Separation of double-stranded DNA fragments by capillary electrophoresis using polyvinylpyrrolidone and poly(N,N-dimethylacrylamide) transient interpenetrating network.

A noncross-linked interpenetrating polymer network (IPN), consisting of poly(N,N-dimethylacrylamide) (PDMA) and polyvinylpyrrolidone (PVP, weight-average molecular weight M(w) = 1 x 10(6) g/mol) was synthesized by polymerizing N,N-dimethylacrylamide (DMA) monomers directly in PVP buffer solution and tested as a separation medium for double-stranded (ds)DNA analysis without further purification. Due to the incompatibility of PVP and PDMA, a simple solution mixture could incur a microphase separation and showed poor performance on dsDNA separation. However, a dramatic improvement was achieved by the formation of an IPN. We attributed the high sieving ability of IPN as due to an increase in the number of entanglements by the more extended polymer chains. Apparent viscosity studies showed that the IPN had a much higher viscosity than the simple mixture containing the same amount of PDMA and PVP. In 1 x Tris-borate-EDTA (TBE) buffer, the concentration ratio of PDMA and PVP had a great effect on the DNA separation. At optimal conditions, the 22 fragments in pBR322/HaeIII DNA were successfully separated within 15 min, with a resolution of better than 1.0 for 123/124 bp.

Acrylamides↗

Concentration gradient used in double-stranded DNA separation by capillary electrophoresis.

Effects of concentration gradient on double-stranded DNA (dsDNA) separation by capillary electrophoresis are presented. By using a concentration gradient in the range between 0.8% and 3.2% for poly(N,N-dimethylacrylamide) (PDMA), the presence of a mesh-size gradient in the capillary could enhance the separation of larger size DNA fragments, better than that based on a single uniform concentration over the same capillary length. A decrease in the column length could make the gradient effect more obvious. An optimal capillary length could be achieved by using a judicious combination of the concentration gradient and the concentration range, yielding a maximum resolution for the system. The standard deviation of the migration time measured for each DNA fragment was less than 5% in ten continuous runs, suggesting that the gradient formed inside the column was quite stable.

Acrylamides↗

DNA separation at a liquid-solid interface.

We demonstrate that it is possible to separate a broad band of DNA on a solid substrate without topological obstacles. The mobility was found to scale with molecular size (N) as N(-0.25), while the resolution scaled as N(0.75) indicating that diffusivity on this substrate was minimal. By varying the buffer concentration we were able to show that the mobility for a given chain length scaled with the persistent length (p) as p(1/2). This could be shown to be related to the Gaussian conformation of the chains adsorbed on the surface. A two-dimensional corrugated surface of nonporous silica beads was produced using a self-assembling process at the air/water interface. Even though the surface corrugations were comparable to persistence length we show that they do not affect the mobility, indicating that surface friction rather than topological constraints are the predominant mechanism of separation on a surface.

Adsorption↗

Coupling of optical characterization with particle and network synthesis for biomedical applications.

Polymeric microspheres containing a magnetic core have been used in cancer therapy for biophysical targeting of antitumor agents and in magnetic resonance imaging as contrasting agents. For the Human Genome Project, deoxyribose nucleic acid (DNA) capillary electrophoresis has become the most widely used analytical technique where a key component is the design of an effective separation medium. The synthesis and optical characterization of polymeric coated superparamagnetic nanoparticles and of (self-assembled) polymer networks by means of a range of physical techniques, including laser light scattering and laser-induced fluorescence detection, are presented. (1) Polymeric microspheres with a superparamagnetic core. A water-in-oil microemulsion approach has been used successfully to synthesize the superparamagnetic core and the polymeric microsphere in one continuous step. The synthesis permits us to control the magnetic nanoparticle size and the thickness of the hydrogel, ranging from 80 to 320 nm. Magnetite concentration in the microspheres, calculated by vibrating-sample magnetometry, was found to be up to 3.3 wt %. The internal structure of the microspheres, as observed by atomic force microscopy, confirmed a core-shell model. (2) Development of new separation media for DNA capillary electrophoresis. Block copolymers in selective solvents can self-assemble to form supramolecular structures in solution. The nanostructures can be characterized in the dilute concentration regime by means of laser light scattering. At semidilute concentrations, the mesh size, the supramolecular structure, and the surface morphology can be investigated by means of small angle x-ray scattering and atomic force microscopy. The structural knowledge and the information on chain dynamics can then be correlated with electrophoresis using laser-induced fluorescence detection to provide a deeper understanding for the development of new separation media.

Biophysical Phenomena↗