PubMed Health⌕ Search

Biomedical subjects

Frances S Ligler

Publications and source records attributed to Frances S Ligler.

At least 19 recordsLinked to original sources
PubMed2007

Target delivery in a microfluidic immunosensor.

A study is presented that examines the effect of microfluidic mixing elements on direct and sandwich assays performed in microchannels. Patterned grooves were embossed in the top of microchannels made in PDMS using soft lithography. The grooves redirected the fluid flowing in the channel, enhancing delivery of the target from the bulk fluid to the surface and preventing the formation of a depletion layer at the surface. Comparing assays in grooved and plain channels demonstrated that the mixers improved assay results by 26-46%. A computational flow analysis showed that the grooves caused virtual particles in the bulk flow to come close to the surface ( approximately 11 microm) which is consistent with the signal increase seen experimentally. Direct assays for several concentrations of CY5-labeled biotin were performed in the microchannels. The mixers also improved signal intensity in sandwich assays for botulinum toxin which required mixing of the reagents as well as the direction of the target to the surface.

Biosensing Techniques↗
PubMed2007

Combination of immunosensor detection with viability testing and confirmation using the polymerase chain reaction and culture.

Rapid and accurate differential determination of viable versus nonviable microbes is critical for formulation of an appropriate response after pathogen detection. Sensors for rapid bacterial identification can be used for applications ranging from environmental monitoring and homeland defense to food process monitoring, but few provide viability information. This study combines the rapid screening capability of the array biosensor using an immunoassay format with methods for determination of viability. Additionally, cells captured by the immobilized antibodies can be cultured following fluorescence imaging to further confirm viability and for cell population expansion for further characterization, e.g., strain identification or antibiotic susceptibility testing. Finally, we demonstrate analysis of captured bacteria using the polymerase chain reaction (PCR). PCR results for waveguide-captured cells were 3 orders of magnitude more sensitive than the fluorescence immunoassay and can also provide additional genetic information on the captured microbes. These approaches can be used to rapidly detect and distinguish viable versus nonviable and pathogenic versus nonpathogenic captured organisms, provide culture materials for further analysis on a shorter time scale, and assess the efficacy of decontamination or sterilization procedures.

Bacillus subtilis↗
PubMed2007

The array biosensor: portable, automated systems.

With recent advances in surface chemistry, microfluidics, and data analysis, there are ever increasing reports of array-based methods for detecting and quantifying multiple targets. However, only a few systems have been described that require minimal preparation of complex samples and possess a means of quantitatively assessing matrix effects. The NRL Array Biosensor has been developed with the goal of rapid and sensitive detection of multiple targets from multiple samples analyzed simultaneously. A key characteristic of this system is its two-dimensional configuration, which allows controls and standards to be analyzed in parallel with unknowns. Although the majority of our work has focused on instrument automation and immunoassay development, we have recently initiated efforts to utilize alternative recognition molecules, such as peptides and sugars, for detection of a wider variety of targets. The array biosensor has demonstrated utility for a variety of applications, including food safety, disease diagnosis, monitoring immune response, and homeland security, and is presently being transitioned to the commercial sector for manufacturing.

Automation↗
PubMed2006

Detection of deoxynivalenol in foods and indoor air using an array biosensor.

Deoxynivalenol (DON), a mycotoxin produced by several Fusaruim species, is a worldwide contaminant of foods and feeds. Because of the potential dangers due to accidental or intentional contamination of foods with DON, there is a need to develop a rapid and highly sensitive method for easy identification and quantification of DON. In this study, we have developed and utilized a competitive immunoassay technique to detect DON in various food matrixes and indoor air samples using an array biosensor. A DON-biotin conjugate, immobilized on a NeutrAvidin-coated optical waveguide, competed with the DON in the sample for binding to fluorescently labeled DON monoclonal antibodies. To demonstrate a simple procedure amenable for on-site use, DON-spiked cornmeal, cornflakes, wheat, barley, and oats were extracted with methanol-water (3:1) and assayed without cleanup or preconcentration. The limits of detection ranged from 0.2 ng/mL in buffer to 50 ng/g in oats. The detection limit of DON spiked into an aqueous effluent from an air sampler was 4 ng/mL.

Air Pollution, Indoor↗
PubMed2006

Toolbox for the design of optimized microfluidic components.

A computational "toolbox" for the a priori design of optimized microfluidic components is presented. These components consist of a microchannel under low-Reynolds number, pressure-driven flow, with an arrangement of grooves cut into the top and bottom to generate a tailored cross-channel flow. An advection map for each feature (i.e., groove of a particular shape and orientation) predicts the lateral transport of fluid within the channel due to that feature. We show that applying these maps in sequence generates an excellent representation of the outflow distribution for complex designs that combine these basic features. The effect of the complex three-dimensional flow field can therefore be predicted without solving the governing flow equations through the composite geometry, and the resulting distribution of fluids in the channel is used to evaluate how well a component performs a specified task. The generation and use of advection maps is described, and the toolbox is applied to determine optimal combinations of features for specified mixer sizes and mixing metrics.

Microfluidic Analytical Techniques↗
PubMed2006

Prevention of nonspecific bacterial cell adhesion in immunoassays by use of cranberry juice.

The ability of Vaccinum macrocarpon, the North American cranberry, to prevent bacterial adhesion has been used to advantage in the prevention of urinary tract infections and has recently been described for the prevention of adhesion of bacteria responsible for oral infections and stomach ulcers. This report documents the ability of cranberry juice to reduce nonspecific adhesion of bacteria to the borosilicate glass microscope slides used in an immunoarray biosensor format. Nonspecific binding of analytes in the array sensor leads to high background signals that cause increased detection limits and false positives. Reduction in background-to-signal ratios can be seen as the juice concentration is increased from 0 to 50% of the sample. This impact cannot be duplicated with grape, orange, apple, or white cranberry juice. Sugar content and pH have been eliminated as the agents in the juice responsible for the anti-adhesive activity.

Anti-Bacterial Agents↗
PubMed2006

Multiplexed measurement of serum antibodies using an array biosensor.

The array biosensor provides the capability for simultaneously measuring titers of antibody against multiple antigens. Human antibodies against four different targets, tetanus toxin, diphtheria toxin, staphylococcal enterotoxin B (SEB) and hepatitis B, were measured simultaneously in sera from eight different donors in a single assay and titers were determined. The assays could measure amounts of bound antibody as low as approximately 100 fg. Each individual serum exhibited a different pattern of reactivity against the four target antigens. Applications of this biosensor capability include monitoring for exposure to pathogens and for efficacy of vaccination.

Animals↗
PubMed2006

Simultaneous determination of kinetic parameters for the binding of cholera toxin to immobilized sialic acid and monoclonal antibody using an array biosensor.

Interactions between protein toxins and carbohydrate receptors are often semi-selective processes and the kinetic parameters that define the binding of a receptor to different toxins may vary with each interaction. In this study, we have determined the affinity constants for binding of cholera toxin (CT) to immobilized sialic acid and to anti-CT antibody (as a simultaneous reference) by measuring real-time binding processes using an array biosensor. N-Acetylneuraminic acid (Neu5Ac), a member of the sialic acid family, was covalently immobilized onto maleimide-activated planar waveguides via a thiol-terminated linker attached to the anomeric carbon of the sugar. Control antibodies were immobilized using two different approaches: covalent attachment onto maleimide-activated slides via the thiol on cysteine residues and non-covalent attachment using a biotin-NeutrAvidin linkage. Cy5-labeled CT was flowed over the immobilized receptors and the fluorescent intensity of the bound CT-receptor complex was recorded as a function of time. The association constants for CT binding to covalently attached Neu5Ac, to covalently attached anti-CT monoclonal antibody, and to antibody tethered by biotin-NeutrAvidin interactions were determined to be 1.3 x 10(8), 2.1 x 10(8) and 5.7 x 10(8)M(-1), respectively.

Antibodies, Monoclonal↗
PubMed2006

Multiplexed detection of mycotoxins in foods with a regenerable array.

The occurrence of different mycotoxins in cereal products calls for the development of a rapid, sensitive, and reliable detection method that is capable of analyzing samples for multiple toxins simultaneously. In this study, we report the development and application of a multiplexed competitive assay for the simultaneous detection of ochratoxin A (OTA) and deoxynivalenol (DON) in spiked barley, cornmeal, and wheat, as well as in naturally contaminated maize samples. Fluoroimmunoassays were performed with the Naval Research Laboratory array biosensor, by both a manual and an automated version of the system. This system employs evanescent-wave fluorescence excitation to probe binding events as they occur on the surface of a waveguide. Methanolic extracts of the samples were diluted threefold with buffer containing a mixture of fluorescent antibodies and were then passed over the arrays of mycotoxins immobilized on a waveguide. Fluorescent signals of the surface-bound antibody-antigen complexes decreased with increasing concentrations of free mycotoxins in the extract. After sample analysis was completed, surfaces were regenerated with 6 M guanidine hydrochloride in 50 mM glycine, pH 2.0. The limits of detection determined by the manual biosensor system were as follows: 1, 180, and 65 ng/g for DON and 1, 60, and 85 ng/g for OTA in cornmeal, wheat, and barley, respectively. The limits of detection in cornmeal determined with the automated array biosensor were 15 and 150 ng/g for OTA and DON, respectively.

Biosensing Techniques↗
PubMed2005

A cowpea mosaic virus nanoscaffold for multiplexed antibody conjugation: application as an immunoassay tracer.

Cowpea mosaic virus (CPMV), an icosahedral 30 nm virus, offers a uniquely programmable biological nanoscaffold. This study reports initial optimization of the simultaneous modification of two CPMV mutants with AlexaFluor 647 fluorescent dyes and either IgG proteins or antibodies at specific sites on the virus scaffold. The capacity of CPMV as a simultaneous carrier for different types of molecules was demonstrated, specifically, when applied as a tracer in direct and sandwich immunoassays. The ability to label the virus capsid with antibody and up to 60 fluorescent dyes resulted in an improved limit of detection in SEB sandwich immunoassays, when used as a tracer, relative to a mole equivalent of dye-labeled antibody.

Antigens↗
PubMed2005

Antimicrobial peptides for detection of bacteria in biosensor assays.

Bacteria, plants, and higher and lower animals have evolved an innate immune system as a first line of defense against microbial invasion. Some of these organisms produce antimicrobial peptides (AMPs) as a part of this chemical immune system. AMPs exert their antimicrobial activity by binding to components of the microbe's surface and disrupting the membrane. The overall goal of this study was to apply the AMP magainin I as a recognition element for Escherichia coli O157:H7 and Salmonella typhimurium detection on an array-based biosensor. We immobilized magainin I on silanized glass slides using biotin-avidin chemistry, as well as through direct covalent attachment. Cy5-labeled, heat-killed cells were used to demonstrate that the immobilized magainin I can bind Salmonella with detection limits similar to analogous antibody-based assays. Detection limits for E. coli were higher than in analogous antibody-based assays, but it is expected that other AMPs may possess higher affinities for this target. The results showed that both specific and nonspecific binding strongly depend on the method used for peptide immobilization. Direct attachment of magainin to the substrate surface not only decreased nonspecific cell binding but also resulted in improved detection limits for both Salmonella and E. coli.

Anti-Infective Agents↗
PubMed2005

Detection of bacterial toxins with monosaccharide arrays.

A large number of bacterial toxins, viruses and bacteria target carbohydrate derivatives on the cell surface to attach and gain entry into the cell. We report here the use of a monosaccharide-based array to detect protein toxins. The array-based technique provides the capability to perform simultaneous multianalyte analyses. Arrays of N-acetyl galactosamine (GalNAc) and N-acetylneuraminic acid (Neu5Ac) derivatives were immobilized on the surface of a planar waveguide and were used as receptors for protein toxins. These arrays were probed with fluorescently labeled bacterial cells and protein toxins. While Salmonella typhimurium, Listeria monocytogenes, Escherichia coli and staphylococcal enterotoxin B (SEB) did not bind to either of the monosaccharides, both cholera toxin and tetanus toxin bound to GalNAc and Neu5Ac. The results show that the binding of the toxins to the carbohydrates is density dependent and semi-selective. Both toxins were detectable at 100 ng/ml.

Adsorption↗
PubMed2005

A microfluidic mixer with grooves placed on the top and bottom of the channel.

A new microfluidic mixer is presented consisting of a rectangular channel with grooves placed in the top and bottom. This not only increases the driving force behind the lateral flow, but allows for the formation of advection patterns that cannot be created with structures on the bottom alone. Chevrons, pointing in opposite directions on the top and bottom, are used to create a pair of vortices positioned side by side. Stripes running the width of the channel generate a pair of vertically stacked vortices. Computational fluid dynamics (CFD) simulations are used to model the behavior of the systems and provide velocity maps at cross-sections within the mixer. Experiments demonstrate the mixing that results when two segregated species enter the mixer side-by-side and pass through two cycles of the mixer (i.e., two alternating sets of four stripes and four chevrons).

Computer Simulation↗
PubMed2005

Array biosensor for detection of ochratoxin A in cereals and beverages.

Contamination of food by mycotoxins occurs in minute quantities, and therefore, there is a need for a highly sensitive and selective device that can detect and quantify these organic toxins. We report the development of a rapid and highly sensitive array biosensor for the detection and quantitation of ochratoxin A (OTA). The array biosensor utilizes a competitive immunoassay format. Immobilized OTA derivatives compete with toxin in solution for binding to fluorescent anti-OTA antibody spiked into the sample. This competition is quantified by measuring the formation of the fluorescent immunocomplex on the waveguide surface. The fluorescent signal is inversely proportional to the concentration of OTA in the sample. Analyses for OTA in buffer and a variety of food and beverage samples were performed. Samples were extracted with methanol, without any sample cleanup or preconcentration step prior to analysis. The limit of detection for OTA in several cereals ranged from 3.8 to 100 ng/g, while in coffee and wine, detection limits were 7 and 38 ng/g, respectively.

Beverages↗
PubMed2005

Biosensor detection of botulinum toxoid A and staphylococcal enterotoxin B in food.

Immunoassays were developed for the simultaneous detection of staphylococcal enterotoxin B and botulinum toxoid A in buffer, with limits of detection of 0.1 ng/ml and 20 ng/ml, respectively. The toxins were also spiked and measured in a variety of food samples, including canned tomatoes, sweet corn, green beans, mushrooms, and tuna.

Animals↗
PubMed2004

Evanescent wave fluorescence biosensors.

Since discovery and first use in the mid-1970s, evanescent wave fluorescence biosensors have developed into a diverse range of instruments, each designed to meet a particular detection need. In this review, we provide a brief synopsis of what evanescent wave fluorescence biosensors are, how they work, and how they are used. In addition, we have summarized the important patents that have impacted the evolution from laboratory curiosities to fully automated commercial products. Finally, we address the critical issues that evanescent wave fluorescence biosensors will face in the coming years.

Biosensing Techniques↗
PubMed2004

Design and evaluation of a Dean vortex-based micromixer.

A mixer, based on the Dean vortex, is fabricated and tested in an on-chip format. When fluid is directed around a curve under pressure driven flow, the high velocity streams in the center of the channel experience a greater centripetal force and so are deflected outward. This creates a pair of counter-rotating vortices moving fluid toward the inner wall at the top and bottom of the channel and toward the outer wall in the center. For the geometries studied, the vortices were first seen at Reynolds numbers between 1 and 10 and became stronger as the flow velocity is increased. Vortex formation was monitored in channels with depth/width ratios of 0.5, 1.0, and 2.0. The lowest aspect ratio strongly suppressed vortex formation. Increasing the aspect ratio above 1 appeared to provide improved mixing. This design has the advantages of easy fabrication and low surface area.

Centrifugation↗