PubMed Health⌕ Search

Biomedical subjects

Todd Emrick

Publications and source records attributed to Todd Emrick.

At least 19 recordsLinked to original sources
PubMed2006

Nanoparticle polymer composites: where two small worlds meet.

The mixing of polymers and nanoparticles is opening pathways for engineering flexible composites that exhibit advantageous electrical, optical, or mechanical properties. Recent advances reveal routes to exploit both enthalpic and entropic interactions so as to direct the spatial distribution of nanoparticles and thereby control the macroscopic performance of the material. For example, by tailoring the particle coating and size, researchers have created self-healing materials for improved sustainability and self-corralling rods for photovoltaic applications. A challenge for future studies is to create hierarchically structured composites in which each sublayer contributes a distinct function to yield a mechanically integrated, multifunctional material.

Journal Article↗
PubMed2006

Coverage-mediated suppression of blinking in solid state quantum dot conjugated organic composite nanostructures.

Size-correlated single-molecule fluorescence measurements on CdSe quantum dots functionalized with oligo(phenylene vinylene) (OPV) ligands exhibit modified fluorescence intermittency (blinking) statistics that are highly sensitive to the degree of ligand coverage on the quantum dot surface. As evidenced by a distinct surface height signature, fully covered CdSe-OPV nanostructures (approximately 25 ligands) show complete suppression of blinking in the solid state on an integration time scale of 1 s. Some access to dark states is observed on finer time scales (100 ms) with average persistence times significantly shorter than those from ZnS-capped CdSe quantum dots. This effect is interpreted as resulting from charge transport from photoexcited OPV into vacant trap sites on the quantum dot surface. These results suggest exciting new applications of composite quantum dot/organic systems in optoelectronic systems.

Cadmium Compounds↗
PubMed2006

Surface-functionalized CdSe nanorods for assembly in diblock copolymer templates.

Poly(ethylene oxide)-covered CdSe nanorods were prepared and assembled in diblock copolymer templates by floating the block copolymer templates onto aqueous nanorod solutions. The assembly was enabled by consideration of the surface ligand coverage of the nanorods. Alkane-covered CdSe nanorods prepared by state-of-the-art techniques are not compatible with this assembly process. However, poly(ethylene oxide) (PEO)-functionalized CdSe nanorods were successfully used to assemble the nanorods into the channels and pores of diblock copolymer templates. Other water-dispersible CdSe nanorods, such as those covered with 11-mercaptoundecanoic acid (MUA), did not give the desired assemblies. These results are understood by considering the surface energies of the PEO-covered CdSe nanorods in this interfacial assembly process.

Journal Article↗
PubMed2006

Observation of enhanced energy transfer in individual quantum dot-oligophenylene vinylene nanostructures.

The temporal and spectral properties of luminescence from individual CdSe quantum dot-oligophenylene vinylene nanostructures (single quantum dots with conjugated organic ligands coordinated to the surface) are profoundly modified relative to blended films of the same components. These kinds of composite quantum dot-conjugated organic systems have attracted significant interest as a way to improve efficiency in photovoltaic device applications. By direct functionalization of the dot surface with the conjugated organic ligands, we realize a significant enhancement in energy transfer and luminescence stability.

Journal Article↗
PubMed2006

"Self-corralling" nanorods under an applied electric field.

Producing densely packed arrays of nanoscopic anisotropic objects, while necessary for applications in photovoltaic and field emission devices, presents considerable challenges. Here, we present findings on the phase separation of ligand-functionalized nanorods in a polymer matrix under an applied electric field. Densely packed hexagonal arrays of nanorods are produced by this method, where the rods are oriented in the direction of the applied field. Minimization of interfacial energy between the array of nanorods and the surrounding polymer serves to corral the nanorods into the densely packed arrays observed. These findings carry implications toward advancing organic-inorganic heterojunction photovoltaic devices that are expected to benefit from the oriented, densely packed ordered arrays of nanorods produced here.

Cadmium Compounds↗
PubMed2005

PEG- and peptide-grafted aliphatic polyesters by click chemistry.

Novel aliphatic polyesters with pendent acetylene groups were prepared by controlled ring-opening polymerization and subsequently used for grafting poly(ethylene glycol) and oligopeptide moieties by the Cu(I)-catalyzed addition of azides and alkynes, a type of "click" chemistry. These aliphatic polyesters possess an acetylene graft density that can be tailored by ring-opening copolymerization of alpha-propargyl-delta-valerolactone (1) with epsilon-caprolactone. Since the mild conditions associated with the click reaction are shown to be compatible with the polyester backbone, this method is a generally useful means for grafting numerous types of functionality onto aliphatic polyesters. The amphiphilic graft polyesters prepared in this study are shown to be biocompatible by in vitro cytotoxicity evaluation, suggesting their suitability for a range of biomaterial applications.

Acetylene↗
PubMed2005

Self-directed self-assembly of nanoparticle/copolymer mixtures.

The organization of inorganic nanostructures within self-assembled organic or biological templates is receiving the attention of scientists interested in developing functional hybrid materials. Previous efforts have concentrated on using such scaffolds to spatially arrange nanoscopic elements as a strategy for tailoring the electrical, magnetic or photonic properties of the material. Recent theoretical arguments have suggested that synergistic interactions between self-organizing particles and a self-assembling matrix material can lead to hierarchically ordered structures. Here we show that mixtures of diblock copolymers and either cadmium selenide- or ferritin-based nanoparticles exhibit cooperative, coupled self-assembly on the nanoscale. In thin films, the copolymers assemble into cylindrical domains, which dictate the spatial distribution of the nanoparticles; segregation of the particles to the interfaces mediates interfacial interactions and orients the copolymer domains normal to the surface, even when one of the blocks is strongly attracted to the substrate. Organization of both the polymeric and particulate entities is thus achieved without the use of external fields, opening a simple and general route for fabrication of nanostructured materials with hierarchical order.

Journal Article↗
PubMed2005

Nanoparticle assembly at fluid interfaces: structure and dynamics.

The self-assembly of nanoparticles at fluid interfaces, driven by the reduction in interfacial energy, was investigated. With spherical, tri-n-octyl-phosphine-oxide covered cadmium selenide (CdSe) nanoparticles (1-8 nm), thermal fluctuations compete with the interfacial segregation giving rise to a size-dependent self-assembly of the particles. The structure of the nanoparticle assembly was studied using electron microscopy, atomic force microscopy, and X-ray scattering in situ, which indicate that the particles form a densely packed monolayer. The energetics of the adsorption of nanoparticles onto the interface was revealed by time-dependent fluorescence studies on a mixture of two different sized nanoparticles at the interface. The dynamics of the nanoparticles at the fluid interface, probed using fluorescence photobleaching methods, suggests a liquid-like behavior. The results have implications in the design of hierarchical self-assemblies of nanoparticles for the one-step fabrication of devices on multiple length scales.

Journal Article↗
PubMed2005

Controlled placement of CdSe nanoparticles in diblock copolymer templates by electrophoretic deposition.

An electrophoretic deposition process is shown to be an effective means of placing CdSe nanoparticles into nanopores and nanotrenches in templates prepared from polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) diblock copolymers. CdSe nanoparticles covered with alpha,omega-thiocarboxylic acid ligands were used in these studies, and an electric field was used to drive the nanoparticle deposition. Photoluminescence of the quantum dots was maintained within the nanostructures.

Adsorption↗
PubMed2004

Monolayer-controlled substrate selectivity using noncovalent enzyme-nanoparticle conjugates.

Electrostatic interactions were used to noncovalently conjugate chymotrypsin to gold nanoparticles featuring hybrid tetraethylene(glycol)alkanethiol monolayers terminated with carboxylate groups. This conjugation process greatly alters the substrate selectivity of the adsorbed chymotrypsin, inhibiting the hydrolysis of anionic subtrates without affecting the hydrolysis rate of cationic analogues.

Acetates↗
PubMed2004

Quantum dots tailored with poly(para-phenylene vinylene).

In polymernanoparticle composites, uniform dispersion of the nanoparticles carries advantages over cases where nanoparticle aggregation dominates. Such dispersion has been particularly difficult to obtain in the case of composites prepared from nanoparticles and conjugated polymers. Here, we show that cadmium selenide nanocrystals, or quantum dots, can be integrated into thin films of poly(para-phenylene vinylene) (PPV) without aggregation. The two key departures from previous studies of quantum-dot/electronic polymer composites are (1) the synthesis of high-quality quantum dots directly in novel, functional ligands, thus eliminating the need for ligand exchange, and (2) polymerization chemistry that grafts PPV to the quantum dot surface. Solid-state photoluminescence spectra of composite materials prepared by these novel techniques reveal the critical importance of the quantum dot-polymer interface that will enable new investigations in nanoparticle-based light-emitting devices.

Journal Article↗
PubMed2004

Hierarchical nanoparticle assemblies formed by decorating breath figures.

The combination of two self-assembly processes on different length scales leads to the formation of hierarchically structured nanoparticle arrays. Here, the formation of spherical cavities, or 'breath figures'-made by the condensation of micrometre-sized water droplets on the surface of a polymer solution-that self-assemble into a well-ordered hexagonal array, is combined with the self-assembly of CdSe nanoparticles at the polymer solution-water droplet interface. Complete evaporation of the solvent and water confines the particle assembly to an array of spherical cavities and allows for ex situ investigation. Fluorescence confocal, transmission electron and scanning electron microscope images show the preferential segregation of the CdSe nanoparticles to the polymer solution-water interface where they form a 5-7-nm-thick layer, thus functionalizing the walls of the holes. This process opens a new route to fabricating highly functionalized ordered microarrays of nanoparticles, potentially useful in sensory, separation membrane or catalytic applications.

Cadmium Compounds↗
PubMed2004

Control of protein structure and function through surface recognition by tailored nanoparticle scaffolds.

Thioalkyl and thioalkylated oligo(ethylene glycol) (OEG) ligands with chain-end functionality were used to fabricate water-soluble CdSe nanoparticle scaffolds. Surface recognition of chymotrypsin (ChT) was achieved using these functionalized nanoparticle scaffolds, with three levels of interaction demonstrated: no interaction (OEG terminated with hydroxyl group), inhibition with denaturation (carboxylate-terminated thioalkyl ligands), and inhibition with retention of structure (carboxylate-terminated OEG). The latter process was reversible upon an increase in ionic strength, with essentially complete restoration of enzymatic activity.

Cadmium Compounds↗