PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 10212596

Suspension systems for prostheses.

S Kapp
View original source ↗Export metadata ↓

Abstract

The appropriate suspension system results in a safe and well functioning lower extremity prosthesis. Residual limb length, joint ligament stability, and limb volume determine suspension methods as does activity level, dexterity, success of previous suspension, and cosmetic requirements. The supracondylar suspension cuff, prosthetic sleeves, and gel liners with locking mechanisms generally are indicated for the average to long transtibial amputation level. Short limbs are better fitted with supracondylar and suprapatellar suspension. Waist belts generally are indicated for patients with new amputations or those with vascular compromise. Suction suspension is the most desirable form of transfemoral suspension and is recommended for most standard to long residual limbs. Roll on silicone liners with or without locking pins and the hyperbaric sock offer the patient systems that are easier to don yet still provide unencumbered suspension. The total elastic suspension belt offers excellent auxiliary suspension and can be applied to the prosthesis by the patient. Multiple factors and patient preference should be considered when prescribing suspension systems for lower extremity prostheses.

Explore related subjects

Artificial LimbsBandagesEstheticsFemurHumansLegLigaments, ArticularMotor ActivityOrthotic DevicesPatient SatisfactionPressureProsthesis DesignPsychomotor PerformanceSiliconesSuctionSurface PropertiesTibiaJournal Article

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

S Kapp. 1999. Suspension systems for prostheses.. https://doi.org/10.1097/00003086-199904000-00008

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2001

The development of the Edinburgh modular arm system.

Modularity has not been investigated in any significant way in the development of upper-limb prostheses. The components currently available are the results of different research programmes conducted at different times by a variety of academic and commercial teams. The result is a historical hodge-podge of systems which are largely mutually exclusive in terms of compatibility. The Edinburgh work seeks to solve this problem by designing components which are neutral in structural terms so that left- and right-handed prostheses can be configured from the same basic parts. Currently, child and adult components are separate items; this does not need to be the case and the design presented here allows adult elbow parts to be used as children's shoulders. This paper will cover the rationale behind the design values and the technical aspects of the development.

Artificial Limbs↗
PubMed2000

Finite element estimates of interface stress in the trans-tibial prosthesis using gap elements are different from those using automated contact.

When compared with automated contact methods of finite element (FE) analyses, gap elements have certain inherent disadvantages in simulating large slip of compliant materials on stiff surfaces. However, automated contact has found limited use in the biomechanical literature. A non-linear, three-dimensional, geometrically accurate, FE analysis of the trans-tibial limb-socket prosthetic system was used to compare an automated contact interface model with a gap element model, and to evaluate the sensitivity of automated contact to interfacial coefficient of friction (COF). Peak normal stresses and resultant shear stresses were higher in the gap element model than in the automated contact model, while the maximum axial slip was less. Under proximally directed load, compared with automated contact, gap elements predicted larger areas of stress concentration that were located more distally. Gap elements did not predict any relative slip at the distal end, and also transmitted a larger proportion of axial load as shear stress. Both models demonstrated non -linear sensitivity to COF, with larger variation at lower magnitudes of COF. By imposing physical connections between interface surfaces, gap elements distort the interface stress distributions under large slip. Automated contact methods offer an attractive alternative in applications such as prosthetic FE modeling, where the initial position of the limb in the socket is not known, where local geometric features have high design significance, and where large slip occurs under load.

Artificial Limbs↗
PubMed2000

Use of Van Nes rotationplasty to manage a burnt knee.

An 11 month old child sustained a deep burn injury to the left knee causing total destruction and sequestration of the knee epiphyses. The ensuing leg length discrepancy with growth was managed by a Van Nes rotationplasty at age four with a good immediate functional result using a below 'knee' prosthesis and the prospect of continuing ambulation as he grows. The surgical options for managing this problem are discussed.

Artificial Limbs↗