PubMed Health⌕ Search

PubMed · 11178584

Overexposure analysis of pulsed distributed feedback laser source.

Abstract

The goal of this study is to assess the risk of overexposure, when DFB dye laser is used for medical treatment in pulsed mode operation. Results of experimental study showing an unexpected rise of energy in pulses of distributed feedback dye laser (DFDL) output due to temperature phase gratings in dye cell during passively Q switched and mode-locked operation is reported. This unintended increase in the number of pulses, pulse duration, per pulse energy may cause side effects, when used for selective photothermolysis. To probe this phenomenon the most commonly used Rh6G dye was excited with 10-20 pulses of second harmonic of a passively Q switched and mode-locked Nd:yttrium-aluminum-garnet(YAG) laser. The outputs of DFDL and Nd:YAG laser were recorded by an Imacon-675 streak camera. The peak of DFDL output pulses was found delayed proportionally from the peak of the Nd:YAG pulses by more than an interpulse period of excitation laser. A computer program was used to simulate the experimentally measured results to estimate the thermal decay constants and energy retained by medium. The delay between peaks of Nd:YAG (input) and DFDL (output) pulses was found to vary from 10 to 14 ns for various cavity lengths. It was interesting to note that for smaller inter-pulse periods the effect of gradual gain buildup satisfied the threshold conditions for some of the pulses that otherwise cannot lase. This may lead to unintended increase in energy fluence causing overexposure-induced bio effects.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

N Khan, A Idrees. 2001. Overexposure analysis of pulsed distributed feedback laser source.. https://doi.org/10.1117/1.1332775

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Effects of feedback and calibration on the verbal estimation of the duration of tones.

Two experiments investigated the effects of feedback (Experiment 1) and calibration (Experiment 2) on verbal estimation of the duration of tones ranging from 77 to 1183 ms in length. In Experiment 1, accurate feedback was provided after half the trials in the feedback condition, and this was contrasted with a no-feedback condition in which feedback was absent. In Experiment 2, in the calibration condition, participants estimated the duration of the second of two tones, after a first tone of a known duration (ranging from 50 to 1200 ms) had been presented. In the no calibration condition the value of the first tone was unknown. Compared with conditions without feedback or calibration, the feedback/calibration operation produced no significant change in group mean estimates, nor coefficients of variation of estimates, but the absolute deviation of estimates from the real stimulus duration, and the absolute deviation of individual estimates from the group mean, were both significantly reduced. The feedback/calibration thus made participants' mean estimates thus more accurate and more similar to one another, but the actual mechanism by which this was done was apparently a subtle process of adjustment, rather than a gross change in mean estimate or estimate variability.

Feedback↗

Feed-forward control of a redundant motor system.

We describe a model of feed-forward control of a redundant motor system and validate it using, as examples, tasks of multi-finger force production. The model assumes the existence of two input signals at an upper level of the control hierarchy, related and unrelated to a task variable. Knowledge of the Jacobian of the system is assumed at the level of generation of elemental variables (variables at the level of effectors). Variance at the level of elemental variables is considered as the sum of two components, related and unrelated to variability in the task variable. An index of stabilization of the task variable is similarly introduced as to how it was done in several studies using the framework of the uncontrolled manifold hypothesis. Several phenomena have been simulated including data point distributions corresponding to presence and absence of force-stabilizing synergies in two-finger tasks, changes in synergies with practice, and changes in synergy indices in preparation to a fast action. The model is discussed in comparison to other models of control of multi-element systems based on feedback processes. It shows that patterns of structured variability in the space of elemental variables can result from feed-forward processes. Relations of the model to the equilibrium-point hypothesis are also discussed.

Feedback↗