PubMed · 11288071
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
M V Sefton. 2001-06-15. Perspective on hemocompatibility testing.. https://doi.org/10.1002/1097-4636(20010615)55%3A4%3C445%3A%3Aaid-jbm1035%3E3.0.co%3B2-a
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
The modification of argon plasma-pretreated single-crystal Si(100) wafer surfaces via the UV-induced graft polymerization of poly(ethylene glycol) methacrylate (PEGMA) macromonomer (molecular weight approximately 340) for biomaterials applications was explored. The modified Si(100) surfaces were characterized by X-ray photoelectron spectroscopy and atomic force microscopy. Surface peroxide concentrations resulting from the argon plasma treatment and subsequent atmospheric exposure were determined by a coupling reaction with diphenylpicrylhydrazyl. The results suggested that a short plasma treatment time of 10 s and brief air exposure were sufficient for generating an optimum amount of peroxides and hydroperoxides for the subsequent UV-induced graft polymerization. The graft concentration of the PEGMA polymer increased with increasing PEGMA macromonomer concentration for the graft polymerization and with increasing UV graft polymerization time. The PEGMA graft-polymerized silicon surface with a high poly(ethylene glycol) graft concentration was very effective in preventing protein adsorption and platelet adhesion. The grafted PEGMA polymer layer on the Si(100) surface exhibited fairly good stability during storage in a buffer solution.
A process for producing hollow microcapsules as ultrasound contrast agents was optimized using a 2(3) factorial experimental design method with two replicates. Spray drying, a conveniently scalable encapsulation technique, was used to encapsulate a volatile core material, such as ammonium carbonate, using biodegradable 50-50 poly(D,L-lactide-co-glycolide). Various effects due to changes in processing variables and their interactions were studied using the factorial grid. The high- and low-incremented variables examined included the temperature difference between the inlet and outlet of the spray dryer (5 degrees and 15 degrees C), air atomization pressure (80 and 100 psi), and polymer concentration in solvent (0.005 and 0.025 g/mL). Responses analyzed for computing the main effects and interactions were microcapsule morphology, yield, mean size, and zeta potential. Experimental results showed that polymer concentration was most important for determining microcapsule morphology. The temperature difference for drying prominently affected mean size, and atomization pressure was the main effect for microcapsule yield. Interactions among variables were not present in this case. The best conditions for producing PLGA microcapsules was a temperature difference of 5 degrees C, an initial polymer concentration of 0.005 g/mL, and an atomization pressure of 80 psi. The microcapsule zeta potentials were unaffected by spray-drying conditions.
The "living" radical polymerization with an iniferter was used to create micropatterned biomedical surfaces. Novel, photosensitive biomedical polymers were created by the incorporation of dithiocarbamate groups from iniferters. A second monomer layer was then irradiated onto the photosensitive polymer substrate created with the iniferter to form a copolymer. Patterns were created on the films by application of modified microfabrication-based photolithographic techniques. The technique was used to create patterns with depths from 5 to 80 microm. In addition, various polymers were incorporated, including polyethylene glycol methacrylates, styrene, and methacrylic acid, to synthesize regions with different physico-chemical properties. Applications include novel surfaces for biosensors and biomaterials for the selective adhesion of cells and proteins.