PubMed2006
Using the interferometric method of Scheludko-Exerowa for investigation of foam films, we have obtained results using a hydrophobically modified inulin polymeric surfactant (INUTEC SP1). Measurements were carried out at constant INUTEC SP1 concentration of 2 x 10(-)(5) mol.dm(-)(3) and at various NaCl concentrations (in the range 1 x 10(-)(4) to 2 mol.dm(-)(3)). At constant capillary pressure of 50 Pa, the film thickness decreased gradually with an increase in NaCl concentration up to 10(-)(2) mol.dm(-)(3) NaCl above which the film thickness remains virtually constant at about 16 nm. This reduction in film thickness with an increase in NaCl concentration is due to the compression of the double layer and at the critical electrolyte concentration (C(el,cr) = 10(-)(2) mol.dm(-)(3)) the electrostatic component of the disjoining pressure is completely screened and the remaining pressure is due to the steric interaction between the adsorbed polymer layers. Disjoining pressure-thickness (Pi-h) isotherms were obtained at C(el) < C(el,cr) (10(-)(4) - 10(-)(3) mol.dm(-)(3)) and C(el) > C(el,cr) (0.5, 1, and 2 mol.dm(-)(3)). In the first case, the disjoining pressure isotherms could be fitted using the classical DLVO theory, Pi = Pi(el) + Pi(vw), and using the constant charge model. At C(el) > C(el,cr), the main repulsion is due to the steric interaction between the polyfructose loops that exist at the air-water interface, i.e., Pi = Pi(st) + Pi(vw). Under these conditions, there is a sharp transition from DLVO to non-DLVO forces. In the latter case, the interaction could be described using the de Gennes' scaling theory. This gave an adsorbed layer thickness of 6.5 nm which is in reasonable agreement with the values obtained at the solid-solution interface. The Pi-h isotherms showed that these foam films are not very stable and they tend to collapse above a critical capillary pressure (of about 1 x 10(3) Pa), and these results could be used to predict the foam stability.