PubMed · 15090437
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
K K Li, P Hiscott, D Wong. 2004. Trypan blue: authors' reply.. https://pubmed.ncbi.nlm.nih.gov/15090437/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
This study is focused on the optimisation of the electrochemical decolourisation of textile effluents containing reactive dyes with the aim of making feasible-technically and economically-this method at industrial scale. Coloured waters were treated in continuous at low current density, to reduce the electrical consumption. Ti/PtO(x) electrodes were used to oxidize simulated dyebaths prepared with an azo/dichlorotriazine reactive dye (C.I. Reactive Orange 4). The decolourisation yield was dependent on the dyeing electrolyte (NaCl or Na(2)SO(4)). Dyeing effluents which contained from 0.5 to 20 gl(-1) of NaCl reached a high decolourisation yield, depending on the current density, immediately after the electrochemical process. These results were improved when the effluents were stored for several hours under solar light. After the electrochemical treatment the effluents were stored in a tank and exposed under different lighting conditions: UV light, solar light and darkness. The evolution of the decolourisation versus the time of storage was reported and kinetic constants were calculated. The time of storage was significantly reduced by the application of UV light. A dye mineralization study was also carried out on a concentrated dyebath. A TOC removal of 81% was obtained when high current density was applied for a prolonged treatment with recirculation. This treatment required a high electrical consumption.
Amphiphilic homopolymers containing a hydrophilic and a hydrophobic functionality in each monomer unit have been shown to form polar or apolar containers depending on the solvent environment. When presented with a mixture of solvents, these polymeric containers are capable of releasing certain guest molecules. The fundamental mechanism behind these properties is investigated, and the utility of these assemblies in separations has been demonstrated with an example.
The binding between an oxazine dye and a humic acid was studied in aqueous solutions in the pH range 4-10 and in the supporting electrolyte (KCl) range 0.001-0.1M. A rather simple spectrophotometric method was developed to construct binding isotherms under conditions were traditional centrifugation or filtration methods fail. The use of this method is possible because humic acid molecules have the ability of changing the spectrum of dye molecules, and this ability is used to quantify the isotherms. All binding isotherms have a Langmuirian shape. The amount of bound dye is strongly dependent on the ionic strength and less dependent on the pH of the solution. The binding is rather strong and mainly driven by non-electrostatic forces. Whereas the Langmuir binding constant is independent of the pH and electrolyte concentration, the number of assessable sites in humic acid for binding oxazine increases by increasing pH and decreasing electrolyte concentration. These results can be directly related to the flexibility of humic acid molecules, which can swell at high pH and low ionic strength, increasing consequently the availability of binding sites. The results also indicate that humic substances may strongly affect the mobility and fate of dyes and related pollutants in the environment.