PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 15644375

Property measurements and solidification studies by electrostatic levitation.

Paul-François Paradis·Jianding Yu·Takehiko Ishikawa·Shinichi Yoda
View original source ↗Export metadata ↓

Abstract

The National Space Development Agency of Japan has recently developed several electrostatic levitation furnaces and implemented new techniques and procedures for property measurement, solidification studies, and atomic structure research. In addition to the contamination-free environment for undercooled and liquid metals and semiconductors, the newly developed facilities possess the unique capabilities of handling ceramics and high vapor pressure materials, reducing processing time, and imaging high luminosity samples. These are exemplified in this paper with the successful processing of BaTiO(3). This allowed measurement of the density of high temperature solid, liquid, and undercooled phases. Furthermore, the material resulting from containerless solidification consisted of micrometer-size particles and a glass-like phase exhibiting a giant dielectric constant exceeding 100,000.

Explore related subjects

BariumCeramicsCrystallizationCrystallographyPhysical PhenomenaPhysicsSpace FlightStatic ElectricityTemperatureTime FactorsTitaniumJournal ArticleResearch Support, Non-U.S. Gov't

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Paul-François Paradis, Jianding Yu, Takehiko Ishikawa, Shinichi Yoda. 2004. Property measurements and solidification studies by electrostatic levitation.. https://doi.org/10.1196/annals.1324.037

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Backside calibration potentiometry: ion activity measurements with selective supported liquid membranes by calibrating from the inner side of the membrane.

In direct potentiometry, the magnitude of the measured potentials is used to determine the composition of the sample. While this places rather formidable demands on the required reproducibility of the associated potential measurements, typically on the order of microvolts, in vitro clinical analyses of blood samples are today successfully performed with direct potentiometry using ion-selective electrodes (ISEs). Unfortunately, most other analytical situations do not permit the sensor to be recalibrated every few minutes, as in environmental monitoring or in vivo measurements, and direct potentiometry is often bound to fail as an accurate method in these circumstances. This paper introduces a novel direction for potentiometric sensing, termed backside calibration potentiometry. Chemical asymmetries across thin supported liquid ISE membranes are assessed by determining the direction of potential drift upon changing the stirring rate on either side of the membrane. Disappearance of this drift indicates the disappearance of concentration gradients across the membrane and is used to determine the sample composition if the solution composition at the backside of the membrane and the interfering ion concentration in the sample are known. For practical determinations, the concentration of either the primary or the interfering ion is varied in the reference solution until the stirring effect disappears. The procedure is demonstrated with a Ca2+-selective membrane using Ba2+ as the dominant interfering ion. Another example includes the determination of Pb2+ in environmental samples where the pH is adjusted to a known level. At pH 4.0, H+ turns out to be the dominant interfering ion. The practical applicability of the method is shown with different environmental water samples, for which the results obtained with the novel method are compared with those obtained by traditional calibration using standard additions. The limitations of the novel method in terms of accuracy and applicable concentration ranges are discussed.

Barium↗
PubMed2007

Multidisciplinary work on barium contamination of the karstic upper Kupa River drainage basin (Croatia and Slovenia); calling for watershed management.

The present work was designed as an extension of a previous study of a barium anomaly observed in stream sediments of the Kupa River. In its upper part the Kupa River drains a region underlain by a trans-boundary aquifer. The river is a significant water resource in a region of tourism, sport, and fishing in both Croatia and Slovenia. The contamination source is situated in Homer (Lokve), Croatia, where barite was mined until 10 years ago. The barium processing waste material (<3-mm fraction) was carelessly deposited in gardens, forests, and into a sinkhole, which has an underground link with the Kupica River, a tributary of the Kupa River. Barium waste and stream sediments were analyzed using comparative techniques: X-ray diffraction (XRD), X-ray fluorescence (XRF), Mössbauer spectroscopy, and grain size analysis. XRD of the waste material identified the major minerals quartz, barite, and dolomite and the Fe-containing minor minerals muscovite and goethite. Barite was identified as a minor or trace mineral in the Kupica River sediments. XRF analysis of the waste material has shown Ba and Fe to be the predominant elements, Ca and K to be minor elements, and Mn, Zn, Sr, Pb, Co, Cu, As, Zr, Rb, Y, and Mo to be trace elements. Mössbauer spectroscopy performed at room temperature (RT) was used to study iron minerals, particularly to obtain information on the valence status of Fe ions. Grain size analysis of the waste material (<63-microm fraction) has shown that it contains 23.5% clay-size material in comparison with 7-8% clay-size material in stream sediments. It is our aim to combine geochemical and medical methods to investigate the possible impact of waste disposal on human health in Lokve. At this stage of the work, concentrations of Ba and other toxic elements in the water compartment of the Kupica River (a source of drinking water) have not been monitored by Croatian Waters (name of the Croatian water authorities). The necessity of such measurements in future studies has been highlighted. A preliminary study of diseases diagnosed in Lokve shows that about 18% of the total inhabitants have serious medical problems. Diseases of the circulatory system, endocrine, nutritional, and metabolic diseases, neoplasms, and respiratory diseases predominate. This paper calls for further multidisciplinary research on the health effects of barium and trace elements, as well as for bioremediation of contaminated gardens and for watershed management of vulnerable karstic aquifers.

Barium↗
PubMed2007

Ca2+- and ba2+-ligand coordinated unilamellar, multilamellar, and oligovesicular vesicles.

Ca(2+)- and Ba(2+)-coordinated vesicle phases were prepared in mixed aqueous solutions of tetradecyldimethylamine oxide (C(14)DMAO) and calcium oleate (Ca(OA)(2)) or barium oleate (Ba(OA)(2)). At the right mixing ratios, metal-ligand coordination between Ca(OA)(2) or Ba(OA)(2) and C(14)DMAO results in the formation of molecular bilayers due to the reduction in area per head group. Ca(2+) and Ba(2+) tightly associate to the head groups of surfactants and in this system the bilayer membranes are not shielded by excess salts. The structures of the birefringent samples of the Ca(OA)(2)/C(14)DMAO/H(2)O and Ba(OA)(2)/C(14)DMAO/H(2)O systems were determined by freeze-fracture transmission electron microscopy (FF-TEM), small-angle X-ray scattering (SAXS), and rheological measurements to consist of unilamellar, multilamellar, and oligovesicular vesicles. The coordination between C(14)DMAO and Ba(OA)(2) or Ca(OA)(2) plays an important role in the formation of the vesicles, which was easily confirmed by studying the phase behavior of the KOA/C(14)DMAO/H(2)O system in which only the L(1) phase forms, due to the absence of coordination between KOA and C(14)DMAO. A mechanism is proposed that accounts for the formation of these new metal-ligand coordinated vesicles.

Barium↗