PubMed Health⌕ Search

PubMed · 15991877

Interjections in interviews.

Abstract

A psycholinguistic hypothesis regarding the use of interjections in spoken utterances, originally formulated by Ameka (1992b, 1994) for the English language, but not confirmed in the German-language research of Kowal and O'Connell (2004 a & c), was tested: The local syntactic isolation of interjections is paralleled by their articulatory isolation in spoken utterances i.e., by their occurrence between a preceding and a following pause. The corpus consisted of four TV and two radio interviews of Hillary Clinton that had coincided with the publication of her book Living History (2003) and one TV interview of Robin Williams by James Lipton. No evidence was found for articulatory isolation of English-language interjections. In the Hillary Clinton interviews and Robin Williams interviews, respectively, 71% and 73% of all interjections occurred initially, i.e., at the onset of various units of spoken discourse: at the beginning of turns; at the beginning of articulatory phrases within turns, i.e., after a preceding pause; and at the beginning of a citation within a turn (either Direct Reported Speech [DRS] or what we have designated Hypothetical Speaker Formulation [HSF]. One conventional interjection (OH) occurred most frequently. The Robin Williams interview had a much higher occurrence of interjections, especially nonconventional ones, than the Hillary Clinton interviews had. It is suggested that the onset or initializing role of interjections reflects the temporal priority of the affective and the intuitive over the analytic, grammatical, and cognitive in speech production. Both this temporal priority and the spontaneous and emotional use of interjections are consonant with Wundt's (1900) characterization of the primary interjection as psychologically primitive. The interjection is indeed the purest verbal implementation of conceptual orality.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Daniel C O'Connell, Sabine Kowal, Carie Ageneau. 2005. Interjections in interviews.. https://doi.org/10.1007/s10936-005-3636-3

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

[Optimization of basic adjustable data-acquisition parameters for continuous three-dimensional whole-body FDG-PET].

UNLABELLED: The SET-3000 G/X (Shimadzu Corp., Kyoto, Japan) has a large aperture and functions as a three-dimensional (3D) dedicated PET scanner. However, the large number of line of responses in the SET-3000 G/X scanner creates a large volume of sinogram data and prolongs reconstruction time in iterative reconstruction. The purpose of this study was to optimize basic acquisition parameters (maximum ring difference and span) for sensitivity and spatial resolution for 3D whole-body (18)F-FDG PET. METHODS: Detector rings and image planes numbered 50 and 99, respectively. In sensitivity measurement, the maximum ring difference (MRD) was changed from 1 to 49. In the measurement of spatial resolution, the span was changed from 3 to 21. For sensitivity and spatial resolution measurements, the standard protocols defined by the Japan Radioisotope Association (JRIA) 1994 and the National Electrical Manufacturers Association (NEMA) NU 2-2001 were used. We also evaluated the corresponding image noise by placing identical ROI on the reconstructed images. RESULTS: The total sensitivity of MRD=49 was 85.7 cps/Bq/ml in a uniform phantom (15 cm diameter, 30 cm tall cylinder) filled with (18)F. This was approximately two times higher than MRD=13. The image noise in the center of the axial FOV decreased with increasing MRD. Spatial resolution was slightly decreased as MRD increased, but axial resolution deteriorated with a span of more than 11. CONCLUSION: Optimum basic data-acquisition parameters for whole-body (18)F-FDG PET were MRD 49 to obtain maximum sensitivity and span 9 to avoid decreasing spatial resolution. Additionally, it was concluded that the basic data-acquisition parameters should be carefully selected for 3D whole-body (18)F-FDG PET in order to maximize the efficiency of PET measurement.

Electronic Data Processing↗

A universal product code scanner is a feasible method of measuring household food inventory and food use patterns in low-income families.

This study assesses the feasibility of using a Universal Product Code (UPC) scanner to record the home food inventory of limited-resource families. Feasibility was based on UPC scanner accuracy, time involved, and researcher/study participant feedback. Program staff members completed a traditional line-item inventory and UPC scan of 5,920 food items during 51 separate visits to the homes of 32 families. Foods reported from the UPC scanner were compared with the manual line-item food inventory. The UPC scanner report had an accuracy of 95.6% (5,661/5,920). Further, the UPC scanning technique offered a 31.8% time savings over the traditional line-item inventory approach. The UPC scanner was easy to use and participants reported that scanning food items was non-intrusive. A UPC scanner is a feasible method of recording the home food inventory, and the accuracy and simplicity of this approach can provide useful information on foods available for consumption within a home.

Electronic Data Processing↗