Supercooled micro flows and application for asymmetric synthesis.

Shinya Matsuoka; Akihide Hibara; Masaharu Ueno; Takehiko Kitamori

doi:10.1039/b602454h

Home/Archive/PubMed

PubMed · 16929404

Supercooled micro flows and application for asymmetric synthesis.

Shinya Matsuoka·Akihide Hibara·Masaharu Ueno·Takehiko Kitamori

View original source ↗Export metadata ↓

Abstract

Supercooled micro flow in microchannels was demonstrated. In order to clarify fundamental properties of the supercooling state in microchannels, freezing temperature was measured in the microchannels having widths ranging from 70 microm to 300 microm. The freezing temperature decreased with decreasing width of the microchannel when the microchannel wall was chemically modified with octadecylsilane group. The lowest freezing temperature was observed as -28 degrees C for water in the 70 microm wide microchannel. By contrast, the freezing temperature was -15 degrees C and did not depend on width when a microchannel with a bare glass surface was used. Next, the freezing point was measured with flow rates ranging from 0.1 to 2.0 microl min(-1) and no dependence on flow rate was observed. Then, the supercooled micro flow was applied to an asymmetric reaction in micro two-phase flow of aqueous and CH2Cl2 phases. As expected from thermodynamic prediction, enantiomeric selectivity increased in the supercooled state of water.

Explore related subjects

Catalysis Ethyl Chloride Freezing Hydroxides Microchip Analytical Procedures Microfluidic Analytical Techniques Molecular Structure Nanotechnology Potassium Compounds Surface Properties Water Journal Article

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Shinya Matsuoka, Akihide Hibara, Masaharu Ueno, Takehiko Kitamori. 2006-07-13. Supercooled micro flows and application for asymmetric synthesis.. https://doi.org/10.1039/b602454h

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2026

Engineering copper ferrite (CuFe2O4) nanocomposites for enhanced eco-friendly photocatalysis: a systematic critical review on mechanisms, performance, and environmental applications.

Water pollution caused by organic and inorganic contaminants, particularly dyes and pharmaceuticals, represents a major environmental challenge. Advanced oxidation processes based on photocatalysts have emerged as efficient and sustainable approaches for water and wastewater treatment. Copper ferrite (CuFe2O4) is considered a promising photocatalyst owing to its narrow bandgap, visible-light activity, chemical stability, and magnetic properties. Despite extensive experimental investigations, a comprehensive systematic comparison of CuFe2O4-based photocatalysts under diverse operational conditions has remained limited. In this study, a systematic review following PRISMA guidelines was conducted using studies published between January 2014 and November 2025 indexed in Scopus, PubMed, Web of Science, and ScienceDirect. From an initial pool of 397 studies, 98 articles met the inclusion criteria. Key parameters - including pollutant type, pH, catalyst dosage, initial pollutant concentration, irradiation time, light source, and degradation efficiency - were quantitatively compared to identify performance trends and operational optima. The results demonstrate that CuFe2O4-based nanocomposites, particularly heterojunction, Z-scheme, and S-scheme architectures combined with TiO2, g-C3N4, graphene, and metal oxides, achieve high degradation efficiencies (often >90 %) for a wide range of organic pollutants and selected inorganic contaminants (e.g., Cr(VI)). Enhanced charge separation and suppressed electron-hole recombination were identified as the primary factors contributing to improved photocatalytic activity. In addition, the intrinsic magnetic properties of these nanocomposites enable facile catalyst recovery and reuse. In conclusion, CuFe2O4-based nanocomposites, especially those incorporating advanced heterojunction architectures, emerge as highly efficient and magnetically recoverable photocatalytic platforms for sustainable water and wastewater treatment, with strong potential for scalable implementation and real-wastewater applications.

Catalysis↗

PubMed2025

Homogeneous Gold Catalysis: Development and Recent Advances.

Gold catalysis has witnessed remarkable advances over the past decade, with numerous insightful reviews chronicling this progress. However, a comprehensive review addressing developments in the field during the post-pandemic COVID era remains notably absent. This review aims to bridge that gap by providing an in-depth analysis of recent studies, shedding light on the unique properties of gold complexes, particularly the intriguing aurophilic interactions that distinguish gold chemistry. The review systematically explores the latest achievements in both mono- and dinuclear gold-catalyzed reactions, with a focus on their applications in diverse fields, including redox coupling, asymmetric catalysis, photo-, and electrocatalysis. A special emphasis is placed on the comparative performance of mono- and dinuclear gold catalysts, with the latter often exhibiting enhanced catalytic efficiency and selectivity in certain reactions. By integrating mechanistic insights and DFT perspectives with representative experimental studies from recent years, this review highlights the significance of gold catalysis to synthetic chemistry, identifies emerging trends and outlines future directions for the field.

Catalysis↗

PubMed2007

Direct solubilization of enzyme aggregates with enhanced activity in nonaqueous media.

A protein solubilization method has been developed to directly solubilize protein clusters into organic solvents containing small quantities of surfactant and trace amounts of water. Termed "direct solubilization," this technique was shown to solubilize three distinct proteins - subtilisin Carlsberg, lipase B from Candida antarctica, and soybean peroxidase - with much greater efficiencies than extraction of the protein from aqueous solution into surfactant-containing organic solvents (referred to as extraction). More significant, however, was the dramatic increase in directly solubilized enzyme activity relative to extracted enzyme activity, particularly for subtilisin and lipase in polar organic solvents. For example, in THF the initial rate towards bergenin transesterification was ca. 70 times higher for directly solubilized subtilisin than for the extracted enzyme. Furthermore, unlike their extracted counterparts, the directly solubilized enzymes yielded high product conversions across a spectrum of non-polar and polar solvents. Structural characterization of the solubilized enzymes via light scattering and atomic force microscopy revealed soluble proteins consisting of active enzyme aggregates containing approximately 60 and 100 protein molecules, respectively, for subtilisin and lipase. Formation of such clusters appears to provide a microenvironment conducive to catalysis and, in polar organic solvents at least, may protect the enzyme from solvent-induced inactivation.

Catalysis↗