PubMed Health⌕ Search

PubMed · 9212267

Spatial memory and path integration studied by self-driven passive linear displacement. I. Basic properties.

Abstract

According to path integration, the brain is able to compute the distance of a traveled path. In this research we applied our previously reported method for studying memory of linear distance, a crucial mechanism in path integration; our method is based on the overt reconstruction of a passive transport. Passive transport is a special case of navigation in which no active control is performed. Blindfolded subjects were first asked to travel 2 m forward, in darkness, by driving with a joystick the robot on which they were seated. The results show that all subjects but two undershot this distance, i.e., overestimated their own displacement. Then, subjects were submitted to a passive linear forward displacement along 2, 4, 6, 8, or 10 m, and had to reproduce the same distance, still blindfolded. The results show that the distance of the stimulus was accurately reproduced, as well as stimulus duration, peak velocity, and velocity profile. In this first condition, the imposed velocity profile was triangular and therefore stimulus distance and duration were correlated. In a second condition, it was shown that distance was correctly reproduced also when the information about stimulus duration was kept constant. Here, different velocity profiles were used as stimuli, and most subjects also reproduced the velocity profile. Statistical analyses indicated that distance was not reproduced as a consequence of duration, peak velocity, or velocity profile reproduction, but was uniquely correlated to stimulus distance. The previous hypothesis of a double integration of the otolith signal to provide a distance estimate can explain our results. There was a large discrepancy between the accuracy with which the subjects matched the velocity profiles and that of distance reproduction. It follows that, whereas the dynamics of passive motion are stored and available to further use, distance is independently estimated. It is concluded that vestibular and somatosensory signals excited by passive transport can be used to build a dynamic as well as a static representation of the traveled path. We found a close quantitative similarity between the present findings on distance reproduction and those obtained from active locomotion experiments in which the same paradigm was used. This resemblance suggests that the two types of navigation tasks draw on common physiological processes and extends the relevance of our results to naturally occurring path integration.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

I Israël, R Grasso, P Georges-Francois, T Tsuzuku, A Berthoz. 1997. Spatial memory and path integration studied by self-driven passive linear displacement. I. Basic properties.. https://doi.org/10.1152/jn.1997.77.6.3180. https://pubmed.health/record/pubmed%3A9212267/spatial-memory-and-path-integration-studied-by-self-driven-passive-linear-displacement-i-basic-prope

Citations retain the original authors and DOI and include this site’s record URL. If this discovery service contributed to your research, you can also cite PubMed Health by Indiciae: BibTeX · RIS.

KEEP EXPLORING

Related citations

The role of attention in horizontal curves: a comparison of advance warning, delineation, and road marking treatments.

Horizontal curves have been recognized as a significant safety issue for many years, a more important factor than road width or sight distance. The research literature suggests that driver errors associated with horizontal curves result from three inter-related problems: failures of driver attention, misperceptions of speed and curvature, and poor lane positioning. To examine the roles of attentional, perceptual, and lane placement factors in driver behaviour at curves, two groups of curve treatments were identified for testing with a driving simulator. The first group of treatments consisted of four combinations of warning signs designed to alert drivers to the presence of curves and produce a reduction in curve approach speeds. The second group was comprised of several types of road markings designed to affect drivers' speed and lane position as they drove through curves. The results indicated that advance warning signs by themselves were not as effective at reducing speeds as when they were used in conjunction with chevron sight boards and/or repeater arrows. Of the road marking treatments only rumble strips produced any appreciable reductions in speed. A herringbones road marking was found to produce significant improvements in drivers' lane positions, effectively flattening the drivers' paths through the curves. A treatment combining the herringbones treatment with chevron and repeater arrow signs produced both a reliable reduction in speed as well as improved lane positions. The results are interpreted as evidence that treatments that highlight perceptual cues are the most effective means of moderating drivers' curve speeds.

Acceleration↗

Uppsalator's acceleration.

Semiquantitative prediction of the Uppsalator (electroosmotical oscillator developed in Uppsala) under constant voltage is confirmed via numerical solution of exact nonlinear integro-differential equations in partial derivatives (PDE). Critical voltage and characteristic features of pressure and liquid flow velocity as functions of time are reproduced with high precision. In particular, the number of inflection points per period of oscillating velocity increases with growing voltage from two to six. A new feature is demonstrated. For sufficiently high voltages the Uppsalator shows normal deceleration, i.e., the oscillation period grows with voltage. However, in some supercritical range of voltages, acceleration is observed, as expressed by decrease of the oscillation period with growing voltage. Thus, the Uppsalator at constant voltage considered earlier as an impossible phenomenon represents a great challenge for experimental verification.

Acceleration↗

Photodissociation at 193 nm of some singly protonated peptides and proteins with m/z 2000-9000 using a tandem time-of-flight mass spectrometer equipped with a second source for delayed extraction/post-acceleration of product ions.

A tandem time-of-flight mass spectrometer was built for photodissociation (PD) of singly protonated peptides and small proteins generated by matrix-assisted laser desorption/ionization. PD was performed in a second source after deceleration of precursor ions. The delayed extraction/post-acceleration scheme was used for the product ions. For the PD at 193 nm of small singly protonated peptides, the present instrument showed much better sensitivity and resolution for product ions than the previous one (Moon JH, Yoon SH, Kim MS, Bull. Korean Chem. Soc. 2005; 26: 763) even though the overall spectral patterns obtained with the two instruments were similar. The present instrument was inferior in precursor ion selection and background noise level. PD was achieved for precursor ions as large as the singly protonated ubiquitin (m/z 8560.63), indicating that the photoexcitation is capable of supplying a sufficient amount of internal energy to dissociate large singly protonated proteins. As the precursor ion m/z increased, however, product ion signals deteriorated rather rapidly. As in the PD of small peptide ions with m/z around 1000, the types of the product ions generated from singly protonated peptides with m/z in the range 2000-4000 were mostly determined by the positions of arginine residues. Namely, a(n) and d(n) ions dominated when an arginine residue(s) was near the N-terminus while v(n), w(n), x(n) and y(n) dominated when the same residue(s) was near the C-terminus. In addition, d(n), v(n) and w(n) ions were generated according to the correlation rules previously observed in the collisionally activated dissociation. Isoleucine and leucine isomers could be easily distinguished based on the w(n) and d(n) ions.

Acceleration↗