PubMed · 10288858
Due to its size, Barnes Hospital had a logjam of asynchronous data. Lab interface workstations are used to alleviate the problem.
Explore connections, maps & timelines
T Holdener. 1988. Interfaces dramatically increase productivity.. https://pubmed.ncbi.nlm.nih.gov/10288858/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
Our microtiter plate assay is based on the enzymatic reduction of nitrate by dissimilatory nitrate reductase from Pseudomonas stutzeri [EC 1.7.99.4]. Exogenous redox mediators like methyl viologen, methylene blue, and cibachron blue were applied to reduce nitrate reductase. Concentrations of 0.02-0.9 mM nitrate can be detected with +/-6% standard deviation, by using a photometric Griess reaction for the formed nitrite. Nitrate reductase is stable in the pH range 6.5-9.0 and works in the temperature range 4-76 degrees C. The assay shows no interferences with salt content up to 1 M chloride or 11 mM chlorate, and serum albumin content up to 50 mg/ml. The time demand of our two-step procedure is 20 min/100 samples. Nitrate reductase could be conserved on site of the wells of microtiter plates for at least 6 months at room temperature. The nitrate assay was applied in environmental and consumer goods analysis, and for medical diagnostics in human plasma samples.
Ultra-thin-layer SDS gel electrophoresis in conjunction with automated laser-induced fluorescence detection is a novel and powerful method for the analysis of fluorophore-labeled proteins. The technique described in this paper employs instant, noncovalent fluorophore labeling by the addition of a fluorescent staining dye to the sample proteins either during or immediately prior to the sample loading process. Thus, the method does not require time-consuming post- or preseparation staining/labeling. By combining the multilane format of SDS polyacrylamide slab gel electrophoresis and the high separation efficiency of capillary SDS gel electrophoresis, ultra-thin-layer SDS gel electrophoresis features rapid, high-throughput, and high-resolution analysis of proteins in the molecular mass range of 14-116 kDa. The good heat dissipation inherent to the ultrathin format enables the use of agarose and agarose-based composite separation matrixes, which can be easily replaced within the separation platform. Labeling efficiency as a function of the concentration of the staining dye, SDS, and proteins is thoroughly discussed. Detection sensitivity of the method was found to be at the low-femtomole level (1.25 ng/band), determined by analyzing a set of serial dilutions of standard proteins. Practical example of molecular mass determination and characterization of a complex protein mixture are also shown.
Protein identification through peptide mass mapping by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) has become a standard technique, used in many laboratories around the world. The traditional methodology often includes long incubations (6-24 h) and extensive manual steps. In an effort to address this, an integrated microanalytical platform has been developed for automated identification of proteins. The silicon micromachined analytical tools, i.e., the microchip immobilized enzyme reactor (mu-chip IMER), the piezoelectric microdispenser, and the high-density nanovial target plates, are the cornerstones in the system. The mu-chip IMER provides on-line enzymatic digestion of protein samples (1 microL) within 1-3 min, and the microdispenser enables subsequent on-line picoliter sample preparation in a high-density format. Interfaced to automated MALDI-TOF MS, these tools compose a highly efficient platform that can analyze 100 protein samples in 3.5 h. Kinetic studies on the microreactors are reported as well as the operation of this microanalytical platform for protein identification, wherein lysozyme, myoglobin, ribonuclease A, and cytochrome c have been identified with a high sequence coverage (50-100%).