PubMed · 11736783
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
P Young, M Blunt. 2001. Why KY?. https://doi.org/10.1046/j.1365-2044.2001.02369-11.x
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
Bioactive glasses (BGs) with three-dimensionally ordered macroporous (3DOM) structures were prepared by combining a sol-gel synthesis with colloidal crystal templating. 3DOM sol-gel BGs with two compositions (20 mol % CaO-80% SiO2 and 20 mol % CaO-4% P2O5-76% SiO2) and three macropore sizes (average: 345, 440, and 790 nm) were prepared. Glasses were separated into two particle sizes (212 microm< small < 355 microm and 600 microm < large < 1000 microm). The glasses were soaked in simulated body fluid at 37 degrees C for 2 or 4 days and the effects of composition, particle size, and macropore size on the formation of apatite and glass degradation were characterized. Within the parameter range of the experiments, several comparisons could be made. First, the formation of apatite and degradation of the glass were slightly enhanced for the phosphate containing composition. Second, large particles formed less apatite and degraded less completely compared with small particles. Lastly, an increase in macropore size slowed down the glass degradation and apatite formation processes, an effect related to the decreased internal surface area of the larger pore materials.
The hierarchical self-assembly of rationally designed synthetic peptides into beta-sheet tapes, ribbons, fibrils, and fibers opens up potentially useful routes to soft-solidlike materials such as hydrogels, organogels, or liquid crystals. Here, it is shown how incorporation of Glu (-CH(2)CH(2)COOH) or Orn (-CH(2)CH(2)CH(2)NH(2)) into the primary structure of an 11 amino acid peptide enables self-assembly to be rapidly (seconds) and reversibly controlled by simply changing pH. Solutions of monomeric peptide, typically at concentrations in excess of 0.003 v/v, can be switched within seconds to, for example, nematic gel states comprised of interconnected orientationally ordered arrays of fibrils or vice versa. This is to be compared with the lyophilized peptide dissolution route to nematic fluids and gels which is impracticably long, taking many hours or even days. An important design principle, that stabilization of fibrillar dispersions requires of the order of one unit of net positive or negative charge per peptide molecule, is first demonstrated and then used to design an 11 amino acid peptide P(11)-3 (CH(3)CO-Gln-Gln-Arg-Phe-Gln-Trp-Gln-Phe-Gln-Gln-Gln-NH(2)) whose self-assembly behavior is independent of pH (1 < pH < 10). pH control is then incorporated by appropriately positioning Glu or Orn side chains so that the peptide-peptide free energy of interaction in the tapelike substructure is strongly influenced by direct electrostatic forces between gamma-COO(-) in Glu(-) or delta-NH(3)(+) in Orn(+), respectively. This design principle is illustrated by the behavior of two peptides: P(11)-4 (CH(3)CO-Gln-Gln-Arg-Phe-Glu-Trp-Glu-Phe-Glu-Gln-Gln-NH(2)) which can be switched from its nematic to its isotropic fluid state by increasing pH and P(11)-5 (CH(3)CO-Gln-Gln-Orn-Phe-Orn-Trp-Orn-Phe-Gln-Gln-Gln-NH(2)) designed to exhibit the converse behavior. Acid-base titrations of fibrillar dispersions reveal deprotonation of the gamma-COOH of Glu or of the delta-NH(3)(+) of Orn(+) occurs over wide bands of up to 5 pH units, a feature of polyelectrolytes. The values of the energy parameters controlling self-assembly can therefore be smoothly and continuously varied by changing pH. This enables isotropic fluid-to-nematic transitions to be triggered by relatively small additions of acid or base, typically 1 part in 10(3) by volume of 1 M HCl or NaOH.
A family of L-lysine-based low-molecular-weight compounds with various positively charged terminals (pyridinium and imidazolium derivatives) was synthesized and its gelation behavior in water was investigated. Most of the compounds can be very easily synthesized in high yields (total yields >90 %), and they function as excellent hydrogelators that form hydrogels below 1 wt %; particularly, N(epsilon)-lauroyl-N(alpha)-[11-(4-tert-butylpyridinium)undecanoyl]-L-lysine ethyl ester (2 c) and N(epsilon)-lauroyl-N(alpha)-[11-(4-phenylpyridinium)undecanoyl]-L-lysine ethyl ester (2 d), which are able to gel water at concentration of only 0.2 wt %. This corresponds to a gelator molecule that entraps more than 20 000 water molecules. All hydrogels are very stable and maintain the gel state for at least 9 months. TEM observations demonstrated that these hydrogelators self-assemble into a nanoscaled fibrous structure; a three-dimensional network is then formed by the entanglement of the nanofibers. An FTIR study in [D(6)]DMSO/D(2)O and in CHCl(3) revealed the existence of intermolecular hydrogen bonding between the amide groups. This was further supported by a (1)H NMR study in [D(6)]DMSO/H(2)O. A luminescence study, in which ANS (1-anilino-8-naphtharenesulfonic acid) was used as a probe, indicated that the hydrogelators self-assemble into nanostructures possessing hydrophobic pockets at a very low concentration. Consequently, it was found that the driving forces for self-assembly into a nanofiber are hydrogel bonding and hydrophobic interactions.