[Cemented total knee arthroplasties].

Abstract

INTRODUCTION: The aseptic loosening of cemented total knee arthroplasties is still an unsolved problem. In this regard, the hydrolysis resistance in the metal-to-bone cement interface is of major importance. MATERIAL AND METHODS: Cemented pre-treated tibia components coated by means of a silica/silane interlayer system of the model "Columbus PS" were dynamically loaded with the help of a knee-simulator similar to DIN ISO 14243. After loading, the components were microscopically analysed concerning debonding in the metal-to-bone cement interface as well as with regard to cement mantle defects. These data were matched with uncoated "Columbus PS" components. Unloaded coated and uncoated tibia components acted as a control. RESULTS: In comparison with uncoated tibia components, the pre-treated and coated ones yielded a highly significant reduction of cement defects (p < 0.01) as well as a significant reduction of debonding in the metal-to-bone cement interface (p < 0.05). CONCLUSION: By means of the silica/silane interlayer system for cemented tibia components, a hydrolytic debonding in the metal-to-bone cement interface with subsequent mechanical loosening and consecutive early cement mantle failure can be significantly reduced. This could lead to an increased long-term stability of the metal-to-bone cement compound with decreased aseptic loosening in clinical use.